SPRING STEEL STRIP 3.175 MM X 25.4MM WIDE. IS- 1570 / C-75 NOTE-TEST CERTIFICATE FROM GOVT.APPROVED LAB FOR CHEMICAL PROPERTIES IS REQUIRED ALONG WITH SUPPLY
Specification
SPRING STEEL STRIP 3.175 MM X 25.4MM WIDE. IS- 1570 / C-75 NOTE-TEST CERTIFICATE FROM GOVT.APPROVED LAB FOR CHEMICAL PROPERTIES IS REQUIRED ALONG WITH SUPPLY
TAPE, WEBBING COTTON, PROOFED, SIZE: 25 MM +/- 1.6 MM WIDE X 1.0 MM +/- 0.1 MM THICK, SPECIFICATION NO.JSS 8305-18:2006 (REV.NO.2) DC NO. 3946-ME DT.04.04.2009. NOTE:BREAKING LOAD 120 KG MINIMUM AS PER SPECIAL REQUIREMENT
PLATINUM - IRIDIUM ( 90:10 ) WIRE, DIAMETER 0.04 MM TO SPECIFICATION USSR-TY-48-1-72-73 IN STANDARD ROLLS CHEMICAL COMPOSITION TO GOST 13498-79, GRADE-P & I-10.
Specification
USSR-TY-48-1-72-73 IN STANDARD ROLLS CHEMICAL COMPOSITION TO GOST 13498-79, GRADE-P & I-10.
LEAD WIRE, SIZE 1.25 +/- 0.25MM DIA.TO SPECN.GOST 5655-67. LEAD SHOULD CONFORM TO ANY GRADE OF LEAD TO SPECN. GOST 3778-77 AND TO BE SUPPLIED IN 03 TO 05 KG REEL.
Specification
GOST 5655-67. GRADE OF LEAD TO SPECN. GOST 3778-77
WASHER-A & WASHER-B DRG.PT.NO.ISV-1589 & ISV 1590 DC-36238-A (FOR BOTH DRGS)MAT.:HDPE TYPE 2 TO SPEC.JSS 9330-03-1995 REV NO.1,2 TO 3% CARBON BLACK TO SPECN.IND/ME/944(PROV)IS TO BEADDED, TO THE BASIC MATERIAL, TO ACHIEVE BLACK COLOUR
WASHER "D" TO DRG.PT.NO.ISV-1592 DC-36488-A, DT.17-11-98(FOR CONTAINER 39 A) NOTE:-AFTER CLEANING & INSPECTION,THE WASHER WILL BE GALVANISED OR PHOSPHATED FOLLOWED BY A FINISHING COAT OF VARNISH,SHELLAC APC 225,30% TO SPCN.JSS 8010-63-1991 MAT.: IS:513-94 GRADE 'O' IN 1/4H CONDITIONS
WASHER "C" TO DRG.PT.NO.ISV-1591 DC-36488-A, DT.17-11-98(FOR CONTAINER 39 A) NOTE:-AFTER CLEANING & INSPECTION,THE WASHER WILL BE GALVANISED OR PHOSPHATED FOLLOWED BY A FINISHING COAT OF VARNISH,SHELLAC APC 225,30% TO SPCN.JSS 8010-63-1991 MAT.:-IS:513-94 GRADE 'O' IN 1/4H CONDITIONS
ELECTROLYTIC TIN PLATE EQUALLY COATED SIZE 400 +/- 2 MM LENG TH X 35 +/- 0.5 MM WIDE X 0.2 MM THICK. CODE E 11.2/11.2 TEM PER T 57/ T 61, SPECN. NO. IS-1993-1993 (THIRD REVISION ) RA-1998
STRIP LEAD GENERAL PURPOSE,SIZE 35 MM PLUS MINUS 1.75 MM X O.4 MM PLUS MINUS 0.04 MM THICK TO SPECN IS: 405 (PART-2) -1992 (3 RD REVISION) IN REEL SIZE 3 TO 10 KGS.
CAP COPPER ALLOY STRIP,SIZE:17 MM PLUS MINUS 0.2 MM WIDE X 1.6 PLUS MINUS 0.04 MM THICK IN COIL FORM AND LENGTH 1O MTRS SPECIFICATION IS:3167-1982,RA-1998,WITH HARDNESS 55 TO 75VPN
CAP COPPER ALLOY STRIP TO IS:3167-1982, 1ST REVISION,REAFFIR MED 1998 ANNEALED,SIZE 22.225 MM PLUS MINUS 0.25 MM WIDE X 0.21 MM PLUS MINUS 0.025 MM THICK,COILED.
