TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016
Specification
TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016
TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016
,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N,
AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.
Drawing no.
Manufacturing Technology
,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N,
AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.
,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N,
AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.
TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR RED.
Specification
TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR RED.
TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR RED.
TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR BLACK.
Specification
TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR BLACK.
TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR BLACK.
PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).
Specification
PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).
PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).
STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.
Specification
STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.
STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.
COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS
Specification
COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS
COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS
SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .
Specification
SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .
SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .
RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.
Specification
RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.
RED COLOURED COTTON DOWN TIGHT. SPECN-IND/ME/1005-2012 DC 51085-ME DT.27.04.2013.COLOUR SHADE NO.537 OF IS;5-2004 FOR SIGNAL RED (5th REVISION) AMENDEMENT NO-1.WIDTH-1400mm.
RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017
Specification
RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017
RAYON WOOL COLOURED RED. PLAIN WEAVE TO SPECIFICATION IND/ME 1004:2013 WITH ANNEXURE DC-5159-ME DTD 25-09-13 ONE METRE WIDTH SIGNAL RED COLOUR SHADE NO.537 OF IS 5-2007 Reffirmed 2017
QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.
Specification
QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.
QUICK LIME IN POWDER FORM AS PER SPCN.IS:1540 (PART-I)1980 REAFFIRMED 2020 FOR GRADE'C'TOTAL ALKALIN- ITY SHOULD BE 80%.MIN.AVAILABLE LIME AS CaO 65% BELOW WHICH THE MATERIAL WILL BE REJECTED(TOTAL ALKAINITY TOBE TESTED AS PER SPECN BF-1.11) QTY OF SAMPLE 1000 GMS FOR EACH TEST.
POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2016 AMDS 1 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE.
Specification
POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2016 AMDS 1 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE.
PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
Specification
PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .
Specification
PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .
PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - 1100kpa, E) STRETCH PERCENT MD OR CD MIN- 1.5.
Specification
PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - 1100kpa, E) STRETCH PERCENT MD OR CD MIN- 1.5.
PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN - 1100kpa, E) STRETCH PERCENT MD OR CD MIN- 1.5.
PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.
Specification
PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.
PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.
READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2007(Reaffirmed 2017) CONFORMING TO IS:138:2018 (forth Revision)
Specification
READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2007(Reaffirmed 2017) CONFORMING TO IS:138:2018 (forth Revision)
READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2007(Reaffirmed 2017) CONFORMING TO IS:138:2018 (forth Revision)
PACKING BOX FOR FLSC-25. AS PER DRG NO. HEMRL DRG HE/CAST/088-SHT NO.1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/083-DET NO.1, DET NO.2, DET NO.3. HEMRL DRG. HE/CAST/081-DET NO.8 & DET NO.9
Specification
PACKING BOX FOR FLSC-25. AS PER DRG NO. HEMRL DRG HE/CAST/083-SHT NO.1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/083-DET NO.1, DET NO.2, DET NO.3. HEMRL DRG. HE/CAST/081-DET NO.8 & DET NO.9
PACKING BOX FOR FLSC-12. AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET NO.9.
Specification
PACKING BOX FOR FLSC-12. AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET NO.9.
Drawing no.
AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET NO.9.
PACKING BOX FOR FLSC-12. AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET NO.9.
No MS TARGET PLATE FOR FLSC-12 SPECIFICATION: MILD STEEL TARGET SHEETS TO IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION:1000 MM (L) X 300 MM (W) X 2 MM(T)
Specification
No MS TARGET PLATE FOR FLSC-12 SPECIFICATION: MILD STEEL TARGET SHEETS TO IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION:1000 MM (L) X 300 MM (W) X 2 MM(T)
No MS TARGET PLATE FOR FLSC-12 SPECIFICATION: MILD STEEL TARGET SHEETS TO IS:2062:2011 Reffirmed 2016 seventh revision DIMENTION:1000 MM (L) X 300 MM (W) X 2 MM(T)
METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.
Specification
METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.
METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.
MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3
Specification
MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3
LEAD TUBE FOR FLSC-25 ( GEN TOL 2102 ) SPECIFICATION:IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1. LEAD PURITY:99.9 % (MIN) DIMENTION:ID:11.0,-0.3 MM,OD:18.0.2 MM LENGTH OF COIL 4 METER.
Specification
LEAD TUBE FOR FLSC-25 ( GEN TOL 2102 ) SPECIFICATION:IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1. LEAD PURITY:99.9 % (MIN) DIMENTION:ID:11.0,-0.3 MM,OD:18.0.2 MM LENGTH OF COIL 4 METER.
LEAD TUBE FOR FLSC-25 ( GEN TOL 2102 ) SPECIFICATION:IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1. LEAD PURITY:99.9 % (MIN) DIMENTION:ID:11.0,-0.3 MM,OD:18.0.2 MM LENGTH OF COIL 4 METER.
LEAD TUBE FOR FLSC-12 (GEN TOL 2102 ) SPECIFICATION: IS 404 : 993 (REAFFIRMED 2019) PART-1,GRADE-1. LEAD PURITY: 99.9 % (MIN) DIMENTION:ID:6.5,-0.2 MM, OD:13.0,- 0.2 MM LENGTHOF COIL 4 METER.
Specification
LEAD TUBE FOR FLSC-12 (GEN TOL 2102 ) SPECIFICATION: IS 404 : 993 (REAFFIRMED 2019) PART-1,GRADE-1. LEAD PURITY: 99.9 % (MIN) DIMENTION:ID:6.5,-0.2 MM, OD:13.0,- 0.2 MM LENGTHOF COIL 4 METER.
LEAD TUBE FOR FLSC-12 (GEN TOL 2102 ) SPECIFICATION: IS 404 : 993 (REAFFIRMED 2019) PART-1,GRADE-1. LEAD PURITY: 99.9 % (MIN) DIMENTION:ID:6.5,-0.2 MM, OD:13.0,- 0.2 MM LENGTHOF COIL 4 METER.
LEAD TUBE FOR MANUFACTURE OF FLSC-10 CHARGES CONFIRMING TO THE SPECIFICATION -IND/MEM911(PROV)DC 3842-ME DT. 04.04.05 1)LEAD PURITY=99.5% MIN. 2)M.P.=315 DEG.CENTI. MIN.3)OD=20.5 1.5MM 4)ID=12.7 1.0MM 5)WALL THICKNESS 3.90 0.25MM 6)LENGTH OF EACH LEAD TUBE=3805MM
Specification
LEAD TUBE FOR MANUFACTURE OF FLSC-10 CHARGES CONFIRMING TO THE SPECIFICATION -IND/MEM911(PROV)DC 3842-ME DT. 04.04.05 1)LEAD PURITY=99.5% MIN. 2)M.P.=315 DEG.CENTI. MIN.3)OD=20.5 1.5MM 4)ID=12.7 1.0MM 5)WALL THICKNESS 3.90 0.25MM 6)LENGTH OF EACH LEAD TUBE=3805MM
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
08
108.270
Metre
15362
186021/OFBA
Ordnance Factory Bhandara
The General Manager,
Bhandara
Bhandara
Maharashtra
441906
Filling of Anhydrous Gr-2 Has in cylendor of 100 Lts Water Cpacity. Qnty Of Anhydrous Ammonia Gr-2 50 Kg In Each Cylendor. Anhydrous Ammonia Gr 2 Confirming to the specification IS 662:2020 Purity 99.5% min.
Specification
Filling of Anhydrous Gr-2 Has in cylendor of 100 Lts Water Cpacity. Qnty Of Anhydrous Ammonia Gr-2 50 Kg In Each Cylendor. Anhydrous Ammonia Gr 2 Confirming to the specification IS 662:2020 Purity 99.5% min.
Filling of Anhydrous Gr-2 Has in cylendor of 100 Lts Water Cpacity. Qnty Of Anhydrous Ammonia Gr-2 50 Kg In Each Cylendor. Anhydrous Ammonia Gr 2 Confirming to the specification IS 662:2020 Purity 99.5% min.
INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008
(Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.
Specification
INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008
(Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.
INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008
(Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.
