IS : 537- 2011 (IIND REV) WITH ADDITIONAL CLAUSES (1)PURITY 99.8% MIN. (2) PARAFFIN 0.5% MAX. (3) BENZENE 0.05% MAX ADDITIONAL TESTS (PURITY PARAFFIN AND BENZENE WILL BE DETERMINED BY GAS CHROMATOGRAPHY REAFF ; 2008

IS : 537- 2011 (IIND REV) WITH ADDITIONAL CLAUSES (1)PURITY 99.8% MIN. (2) PARAFFIN 0.5% MAX. (3) BENZENE 0.05% MAX ADDITIONAL TESTS (PURITY PARAFFIN AND BENZENE WILL BE DETERMINED BY GAS CHROMATOGRAPHY REAFF ; 2008

IS : 264 - 2005 (REAFF 2017) III RD REV. TOTAL ACIDITY (AS HNO3) PERCENT BY MASS, MIN (EXPLOSIVE GRADE) : 98.0% RE-SIDUE ON IGNITION PERCENT MIN. 0.05, CHLORIDES (AS CL) PER-CENT MAX 0.001, SULPHATE (AS H2SO4) PERCENT MAX 0.03 NITROUS ACID AS (HNO2) PERCENT BY MASS MAX 0.2

IS : 264 - 2005 (REAFF 2017) III RD REV

METABISULPHITE CONTENT SHALL BE NIL. PH OF 10% SOLUTION SHOULD BE 8.5 TO 9.5

IS.247-1987 (FOURTH REVISION) (RE-AFFIRMED 2015)

REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5

REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5

TEND :2509*4 (for K-1202*5)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FILLING OF GAS IN OUR CYLINDER AFTER NECESSARY PRESSURE TESTING OF CYLINDER, CYLINDER CAPACITY 50 KG.

IS 432-1993 REAFF 1999 (1ST REV) REAFF 1999 (EDITION 2.1) (1998-02)

IS 8397- 1976 REAFF 2011 WITH ADDITIONAL CLAUSE OF NITROBENZENE CONTENT 0.10% MAXIMUM

IS 8397- 1976 REAFF 2011

IS 1089-1986, REAFF 2003) EXPLOSIVES GRADE, (IIND REV) (A) CONTENTS OF FREE SO3:20% TO 22% (B) IRON:0.01% MAXIMUM (C) LEAD:0.01% MAXIMUM (D) RESIDUE : 0.06% MAXIMUM (E) SPECIFIC GRAVITY MINIMUM 1.920 MAXIMUM 1.925 AT 15 DEG C

IS 1089-1986, REAFF 2003)

9910933683

DRW NO. HE-5036/B

DRW NO. HE-5036/B

IS 248-1987 REAFF-2010 4TH REV

IS 248-1987 REAFF-2010 4TH REV

(GRADE MV 2) SPECN IS-1593 1982 (IIND REV) REAFF 2004

(GRADE MV 2) SPECN IS-1593 1982 (IIND REV) REAFF 2004

RIFLE BOX SMALL TO DRG. NO. RFI NO. 10368 FOR 7.62X51 MM SNIPER RIFLE

RIFLE BOX SMALL TO DRG. NO. RFI NO. 10368 FOR 7.62X51 MM SNIPER RIFLE

RFI NO. 10368

GENERATOR HAND FIRING 105 37 LFG E2 105-IFG MK-II TO DRG. NO. LRDE DGN.SK NO z.649-G,CAT NO. Z6/6115-000538 TO SPECN LRDE TS-2479. SL.NO.106 SCHEDULE.

SPECNLRDE TS-2479. SL.NO.106 SCHEDULE.

CAT NO. Z6/6115-000538

ROTATORY SWITCH

ROTATORY SWITCH

ASSY. OF DRIVER SEAT RH PT. NO. X8001600

ASSY. OF DRIVER SEAT RH PT. NO. X8001600

ASSY OF CO-DRIVER SEAT LH PT. NO. X8001300-B

ASSY OF CO-DRIVER SEAT LH PT. NO. X8001300-B

12 V EDC 15 VM OF VP 37 FIE WITH ECU AND SEP ENGINE WIRING HARNESS FOR 135 KW BS-III STAL VEH PART NO. A2J00500

12 V EDC 15 VM OF VP 37 FIE WITH ECU AND SEP ENGINE WIRING HARNESS FOR 135 KW BS-III STAL VEH PART NO. A2J00500

SCREW-FOOT BRAKE-LYNX BS-III PART NO. F 7873550

SCREW-FOOT BRAKE-LYNX BS-III PART NO. F 7873550

FLICK VALVE COVER, BS- III, PART NO. F7871980

FLICK VALVE COVER, BS- III, PART NO. F7871980

IGNITION STARTER SWITCH, BS III PART NO. FJ107500

IGNITION STARTER SWITCH, BS-III PART NO. FJ107500

Bandolier 1A Complete

Drg. No. ARDE-1942, Sheet no. 3 Drg. Part No. ISV-423 DC No. ..............

WIPER MOTOR-1614, BS-III

WIPER MOTOR-1614, BS-III

Flick Valve Assy BS III B3952504 Total 2 Items Details enclosed as Annexure III

Flick Valve Assy BS III B3952504 Total 2 Items Details enclosed as Annexure III

Operating Pedal and Linkage part No BOY02310 (Total 6 Items Enclosed As pe Annexure-II)

Operating Pedal and Linkage part No BOY02310 (Total 6 Items Enclosed As pe Annexure-II)

General and Electrical Total 24 items for MPVBS- III (List of Items Along with Part No., Item name and qty per/ Vehicle is enclosed

General and Electrical Total 24 items for MPVBS- III (List of Items Along with Part No., Item name and qty per/ Vehicle is enclosed

MPV KIT (Engine Items)

MPV KIT (Engine Items)

17 items as per enclosed list-1/OR Manufacturing of MPV

17 items as per enclosed list-1/OR Manufacturing of MPV

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 6 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 6 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

TEND 2383 STAR 6

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

Link for 30 mm gun Fully Finished to Drg No 9H623 REQUIRED FOR 30mm BMP II Ammn

Link for 30 mm gun Fully Finished to Drg No 9H623 REQUIRED FOR 30mm BMP II Ammn LF No 7013889230

9H623

St. Rod 8.23mm dia for JVPC

St. Rod 8.23mm dia for JVPC

St. Rd. 4.47MM dia to Specn. IS:5517-1993.GD-55CB(EN-9)(5 types of Pin)

St. Rd. 4.47MM dia to Specn. IS:5517-1993.GD-55CB(EN-9)(5 types of Pin)

St. Rod 3.25MM dia to Specn. IS:5517-1993.40CB(EN-8) (Pin St. Hdls. Cocking Bracket & Gas block)

St. Rod 3.25MM dia to Specn. IS:5517-1993.40CB(EN-8) (Pin St. Hdls. Cocking Bracket & Gas block)

St. Rod 6.35 mm dia to Specn. IS: 3748-1990 T90MN6WCR2 (Rod Cocking)

St. Rod 6.35 mm dia to Specn. IS: 3748-1990 T90MN6WCR2 (Rod Cocking)

Disc Adjusting Obturator SHIMs as per Drg No 161 646

As per Drg. No. 161-646

SHIM to Drg No 166-461

As per Drg No 166-461

SHIM to Drg No 176 1165

As per Drg. No. 176-1165

SHIM to Drg No 176 1170

As per Drg No 176-1170

SHIMS to Drg No 176 2118

As per Drg. No 176-2118

SHIM as per Drg No 176 1181

As per Drg No 176 1181

SHIMs as per Drg No 176-8157, 176-8158 and 176-8159

As per Drg No 176-8157, 176-8158 and 176-8159

SHIMS to Drg No 166 451

As per Drg No 166-451

GE LENS AS PER DRAWING NO. MRS5000061 OF MRS OF TI-SIGHT "ESSA"

MRS5000061

MRS5000061

PIN FOR LEVER ,CONTROL HAND TO DRG.NO. MCT-3230 FOR DAY SIGHT 5.56MM RIFLE.

PIN FOR LEVER ,CONTROL HAND TO DRG.NO. MCT-3230 FOR DAY SIGHT 5.56MM RIFLE.

PIN FOR LEVER ,CONTROL HAND TO DRG.NO. MCT-3230 FOR DAY SIGHT 5.56MM RIFLE.

ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

SEAR SAFETY TO RFI.SK.10367 (THROUGH MIM ROUTE) FOREXCALIBUR MK-1,5.56X45MM ASSAULT RIFLE INSAS 1C AND GHATAK

SEAR SAFETY TO RFI.SK.10367 (THROUGH MIM ROUTE) FOREXCALIBUR MK-1,5.56X45MM ASSAULT RIFLE INSAS 1C AND GHATAK

RFI.SK.10367

CASE MORTAR SIGHT TESTING APPARATUS MK-I AS PER DRG NO. CIA(FC)2434

CASE MORTAR SIGHT TESTING APPARATUS MK-I AS PER DRG NO. CIA(FC)2434

CIA(FC)2434

SPECN. IS7129-921ST REV. REAFF 2010

SPECN. IS7129-921ST REV. REAFF 2010

as per specification & requirement

OEFC/OISB/9001

• clicking, splitting, eyeletting , injection moulding machine

• chemical

CASE CANVAS TO DRG NO. MCT-1415

CASE CANVAS TO DRG NO. MCT-1415

DRG NO. MCT-1415

CASE CARRYING AS PER DRG NO. MCT-1764

CASE CARRYING AS PER DRG NO. MCT-1764

DRG NO. MCT-1764

CASE CARRYING TO DRG NO. MCT-2658/1 GUN RULE FIELD GUN CASED 101-A (HIGH ANGLE)

CASE CARRYING TO DRG NO. MCT-2658/1 GUN RULE FIELD GUN CASED 101-A (HIGH ANGLE)

DRG NO. MCT-2658/1

CASE CARRYING TO DRG NO.MCT-2542/1,(LOW- ANGLE) MCT-2542/1

CASE CARRYING TO DRG NO.MCT-2542/1,(LOW- ANGLE) MCT-2542/1

DRG NO.MCT-2542/1,(LOW- ANGLE) MCT-2542/1

CASE CARRYING AS PER DRG NO. MCT-1966/1

CASE CARRYING AS PER DRG NO. MCT-1966/1

DRG NO. MCT-1966/1

STRAP WEBBING ASSY MCT-2965/1 FOR BINOCULAR STAINER 8X30R(HR BINO)

STRAP WEBBING ASSY MCT-2965/1 FOR BINOCULAR STAINER 8X30R(HR BINO)

MCT-2965/1

CASE CARRYING BINO STAINER 8X30 R AS PER DRG NO. MCT-2964/2 FOR HR BINO 8X30.

CASE CARRYING BINO STAINER 8X30 R AS PER DRG NO. MCT-2964/2 FOR HR BINO 8X30.

DRG NO. MCT-2964/2

Oval Spring Platform for JVPC, Drg. No. 0204-03-02-0009-002-00DC

Oval Spring Platform for JVPC, Drg. No. 0204-03-02-0009-002-00DC

Drg. No. 0204-03-02-0009-002-00DC

Steek Round dia 6mm to Specn IS:5517-1993 Grade 40 NI 6CR 4 Mo3 (EN-24) (Rod Front)

Specn IS:5517-1993 Grade 40 NI 6CR 4 Mo3 (EN-24) (Rod Front)

Specn IS:5517-1993 Grade 40 NI 6CR 4 Mo3 (EN-24) (Rod Front)

STEEL ROUND dia 18MM TO SPECN:IS:5517-1993 grade 40 NI 6CR4 Mo3(EN-24)

SPECN:IS:5517-1993 grade 40 NI 6CR4 Mo3(EN-24)

SPECN:IS:5517-1993 grade 40 NI 6CR4 Mo3(EN-24)

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

• Melting and Rolling

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14

STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14

Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725

Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725

drawing SK-5725

Steel Forging Block Gas for JVPC, Drg. No. SK-JVPC-6003

Steel Forging Block Gas for JVPC, Drg. No. SK-JVPC-6003

Drg. No. 0204-03-02-36-37-002-00DF

STEEL ROD 4.0MM DIA TO SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.

STEEL ROD 4.0MM DIA TO SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.

SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.

STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19

STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19

Sheet 1.0 mm thickness IS:7226-1974Gd C-40 for two piece case magazine

1.0 mm thickness IS:7226-1974Gd C-40 for two piece case magazine

Drg No. 0204-03-02-00-01-001-00DE

1.0 mm thickness IS: 513-1994, GD EDD for plate form magazine

1.0 mm thickness IS: 513-1994, GD EDD for plate form magazine

Drg No. 0204-03-02-00--09-003-00DC

Screw Barrel Cover M5x20 for 5.56 MM as per IS: 1366

Screw Barrel Cover M5x20 for 5.56 MM as per IS: 1366

M5x20 for 5.56 MM as per IS: 1366

Retainer for JVPC, Drg. No. 0204-03-02-00-09-005-00DC

Retainer for JVPC, Drg. No. 0204-03-02-00-09-005-00DC

Drg. No. 0204-03-02-00-09-005-00DC

Plastic Packing Box for 10 JVPC alongwith accessories

Plastic Packing Box for 10 JVPC alongwith accessories

Pin Lever Catch Magazine for JVPC, Drg. No. 0204-03-02-02-18-020-00DA

Pin Lever Catch Magazine for JVPC, Drg. No. 0204-03-02-02-18-020-00DA

Drg. No. 0204-03-02-02-18-020-00DA

Manufacturing of blank of cocking bracket for JVPC with SAF SK -106 RM St. Rod dia 46 mm rod & length 150 mm 0375003046

Manufacturing of blank of cocking bracket for JVPC with SAF SK-106 RM St. Rod dia 46 mm rod & length 150 mm 0375003046

Drg No.0204-03-02-0001-001-00XD

Magazine Assembly for JVPC, Drg. No. 0204-03-03-00-07-000-00DD

Magazine Assembly for JVPC, Drg. No. 0204-03-03-00-07-000-00DD

Drg. No. 0204-03-03-00-07-000-00DD

Investment Casting Housing Rear Sight for JVPC 5.56 MM, Drg. No. SK-JVPC-598*

Investment Casting Housing Rear Sight for JVPC 5.56 MM, Drg. No. SK-JVPC-598*

Drg. No 0204-03-02-15-28-003-00DC

Investment Casting Cocking bracket for JVPC Drg. No. 0204-03-02-00-01-001-00XD

Investment Casting Cocking bracket for JVPC Drg. No. 0204-03-02-00-01-001-00XD

Drg. No. 0204-03-02-00-01-001-00XD

Guide Piece Magazine for JVPC , Drg. No. 0204-03-02-18-29-003-00DB

Guide Piece Magazine for JVPC ,Drg. No. 0204-03-02-18-29-003-00DB

Drg. No. 0204-03-02-18-29-003-00DB

CASE CARRYING TO DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I) INSTRUCTION SHEET NO.IS/INF/15(A)

CASE CARRYING TO DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I) INSTRUCTION SHEET NO.IS/INF/15(A)

DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I)

CASE CARRYING (BAG.NO.3) FOR TELESCOPE 84 MM MK-III. NOTE:-1.SAMPLE CAN BE SEEN AT OFD.

CASE CARRYING (BAG.NO.3) FOR TELESCOPE 84 MM MK-III. NOTE:-1.SAMPLE CAN BE SEEN AT OFD.

CASE CARRYING TELESCOPE SIGHTING 5.56 MM LMG (INSAS) 101A, MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)

CASE CARRYING TELESCOPE SIGHTING 5.56 MM LMG (INSAS) 101A, MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)

MCT-1452/2 CONSIST OF (MCT-1369,MCT-1455/1, MCT-1458/1,MCT-1454/4,MCT-1350/1,MCT-1453/3, MCT-1456/1,MCT-1451/6,MCT-1349/1)

Set of Prism for HR Bino,MCT- 2954/1, 2976/1

Set of Prism for HR Bino,MCT- 2954/1, 2976/1

MCT- 2954/1, 2976/1

OPT.GLASS SLAB EDF-648338

OPT.GLASS SLAB EDF-648338 SLAB SIZE 300-400x120-180x30-75 mm