ALUMINIUM BRONZE BUSHING TO DRG NO. 765-31-46 IN PROOF MACHINED CONDITION AS PER DRAWING BY SPUN / CENTRIFUGAL CASTING METHOD. EQUIVALENT MATERIAL: GRADE AB1 TO IS: 305-81

AS PER ATTACHED DRAWING ONLY.

765-31-46

ALUMINIUM BRONZE BUSHING TO DRAWING NO. 765-31-49, IN PROOF MACHINED CONDITION AS PER DRAWING BY SPUN / CENTRIFUGAL CASTING METHOD

AS PER ATTACHED DRAWING.

765-31-49

ALUMINIUM MANGANESE MASTER ALLOY (10% MANGANESE Fe: 0.30 MAX AND ALUM: REMINDER SHAPE & SIZE AS PER IS: 1820-1979 (INGOT WEIGHT: 5KGS.)

ALUMINIUM MANGANESE MASTER ALLOY (10% MANGANESE Fe: 0.30 MAX AND ALUM: REMINDER SHAPE & SIZE AS PER IS: 1820-1979 (INGOT WEIGHT: 5KGS.)

MANGANESE METTALIC AS PER IS 2021-1973 GR E Mn-99 (IN FORM OF MANGANESE FLAKES

MANGANESE METTALIC AS PER IS 2021-1973 GR E Mn-99 (IN FORM OF MANGANESE FLAKES

ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).

ALUMINIUM ALLOY PIPE DIA 16 MM X 1.5MM WT IN STD.LENGTH IN AMG6M GOST:18475-73 OR 54300-'O'CONDITION IS:738

ALUMINIUM ALLOY PIPE DIA 16 MM X 1.5MM WT IN STD.LENGTH IN AMG6M GOST:18475-73 OR 54300-'O'CONDITION IS:738

ALUMINIUM ALLOY SHEET SIZE 3MM X 1250 X 2500M. SPECN. AMG 6bM-3 GOST 21631-76 OR GRADE 54300 "O" CONDITION TO IS: 737-86 COLOUR CODE AS PER IS: 2479-1981.

ALUMINIUM ALLOY SHEET SIZE 3MM X 1250 X 2500M. SPECN. AMG 6bM-3 GOST 21631-76 OR GRADE 54300 "O" CONDITION TO IS: 737-86 COLOUR CODE AS PER IS: 2479-1981.

ALUMINIUM ALLOY SHEET SIZE 2.5MM X 1250 X 2500MM. SPECN. AMG5M 2.5 GOST 21631-76 OR EQUIVALENT MATERIAL GRADE 54300/55000 "O" CONDITION TO IS: 737-86 COLOUR CODE AS PER IS: 2479-1981

ALUMINIUM ALLOY SHEET SIZE 2.5MM X 1250 X 2500MM. SPECN. AMG5M 2.5 GOST 21631-76 OR EQUIVALENT MATERIAL GRADE 54300/55000 "O" CONDITION TO IS: 737-86 COLOUR CODE AS PER IS: 2479-1981

ALUMINIUM ALLOY SHEET TO SIZE 1.5MM X 1250MM X 2500MM. SPECN AMG6bM GOST 21631-76,OR GRADE 54300/55000 "O" CONDITION TO IS: 737-86.

ALUMINIUM ALLOY SHEET TO SIZE 1.5MM X 1250MM X 2500MM. SPECN AMG6bM GOST 21631-76,OR GRADE 54300/55000 "O" CONDITION TO IS: 737-86.

ALUMINIUM BRONZE ROUND BAR DIA. 52 MM X LENGTH 100MM MIN. AB1 TO IS:305-81

ALUMINIUM BRONZE ROUND BAR DIA. 52 MM X LENGTH 100MM MIN. AB1 TO IS:305-81

STEEL PIPE TO OUTER DIA 26 +/-0.3 X WALL THICKNESS 10 +/-0.6 MM IN STD.LENGTH OR 6000 MM, 42Cr4 Mo2 TO IS:5517-93.

STEEL PIPE TO OUTER DIA 26 +/-0.3 X WALL THICKNESS 10 +/-0.6 MM IN STD.LENGTH OR 6000 MM, 42Cr4 Mo2 TO IS:5517-93.

STEEL SHEET 2.5X1000X2000MM , 12 Cr13, Finish No.1,IS:6911 (annealed)

STEEL SHEET 2.5X1000X2000MM , 12 Cr13, Finish No.1,IS:6911 (annealed)

STEEL SHEET 2.5 X 1000 X 2000 MM,GRADE: Fe490 TO IS:1079-88.

STEEL SHEET 2.5 X 1000 X 2000 MM,GRADE: Fe490 TO IS:1079-88.

TYPICAL PATTERN WAX AS PER SPECIFICATIONS ENCLOSED

TYPICAL PATTERN WAX AS PER SPECIFICATIONS ENCLOSED

ESTER CURED ALKALINE PHENOLIC RESIN (TWO PART NO-BAKE) FOR MANUFACTURE OF MOULDS AND CORES FOR LOW ALLOY AND MANGANESE STEEL CASTINGS AS PER SPECIFICATIONS ENCLOSED.

AS PER SPECIFICATIONS ENCLOSED

HARDENER FOR ESTER CURED ALKALINE PHENOLIC RESIN (TWO PART NO-BAKE) FOR MANUFACTURE OF MOULDS AND CORES FOR LOW ALLOY AND MANGANESE STEEL CASTINGS AS PER SPECIFICATIONS ENCLOSED.

SPECIFICATIONS ENCLOSED

CARBON-DIOXIDE CURED RESIN AS PER ENCLOSED SPECIFICATIONS. (SUPPLIES ALONG WITH CHEMICAL DATA SHEET)

CARBON-DIOXIDE CURED RESIN AS PER ENCLOSED SPECIFICATIONS. (SUPPLIES ALONG WITH CHEMICAL DATA SHEET)

SILICIC ACID SOLUTION.SiO2 - 30+1%, Na2O3 - MAX: 0.35%, Fe2O3 - MAX: 0.02%, R2O3 - MAX 0.2%. DENSITY - 1.2, PH - 9.2 TO 10. IN A 40 / 60 KGS CONTAINER OF HDPE CARBOUYS. (SUPPLIES ALONG WITH CHEMICAL DATA SHEET).

SILICIC ACID SOLUTION.SiO2 - 30+1%, Na2O3 - MAX: 0.35%, Fe2O3 - MAX: 0.02%, R2O3 - MAX 0.2%. DENSITY - 1.2, PH - 9.2 TO 10. IN A 40 / 60 KGS CONTAINER OF HDPE CARBOUYS. (SUPPLIES ALONG WITH CHEMICAL DATA SHEET).

CERAMOL 256 IP (SUPPLIES ALONG WITH CHEMICAL DATA SHEET)

CERAMOL 256 IP (SUPPLIES ALONG WITH CHEMICAL DATA SHEET)

LEAD ALLOY GRADE: 4NOCCY (POSSU) 18-2 GOST: 21930-76. COMPOSITION: TIN: 1.8 TO 2.3, CADMIUM: 17.5 TO 18.5. LEAD: REST.

LEAD ALLOY GRADE: 4NOCCY (POSSU) 18-2 GOST: 21930-76. COMPOSITION: TIN: 1.8 TO 2.3, CADMIUM: 17.5 TO 18.5. LEAD: REST.

AIR PRESSURE CONTROL UNIT 765 78 CD533

AIR PRESSURE CONTROL UNIT 765 78 CD533

COPPER SHEET 4.5 MM THICKNESS X 1250 X 2500 MM AS PER GRADE AHM4.5M1, GOST: 495-77 OR IS: 1972.

COPPER SHEET 4.5 MM THICKNESS X 1250 X 2500 MM AS PER GRADE AHM4.5M1, GOST: 495-77 OR IS: 1972.

COVERAL GR. 2516 (E). SUPPLIES ALONG WITH CHEMICAL DATA SHEET.

COVERAL GR. 2516 (E). SUPPLIES ALONG WITH CHEMICAL DATA SHEET.

MULTI SPECTRAL CAMOUFLAGE EQUIPMENT TO ART.NO.1155287D COMPRISING OF FOLLOWING ITEMS:-(1)MSCN"PARASOL" OF DIA 2.2m (OUTSIDE GREEN PRINTED),QTY-10NOS(2)MSCN PARASOL OF DIA 2.2m (OUTSIDE DESERT PRINTED),QTY-10 NOS.(3)MSCN SCREEN(REVERSIBL E)OF SIZE 7mX7m,QTY-04 NOS.(4)PARASOL FOOT(GROUND POLE ), QTY-05 NOS.(5)EXTENSION TUBE,QTY-05 NOS.(6)SUPPORT POLE ASSY 3m HEIGHT(TELESCOPIC),QTY-06 NOS.(7)GROUND PEGS,QTY-10 NOS. (8)BAG FOR MSCN PARASOL,QTY-20 NOS.(9)BAG FOR MSCN SCREENS (REVERSIBLE),QTY-01 NOS.(AS PER DOC.NO.GCF/50/40259.

MULTI SPECTRAL CAMOUFLAGE EQUIPMENT TO ART.NO.1155287D COMPRISING OF FOLLOWING ITEMS:-(1)MSCN"PARASOL" OF DIA 2.2m (OUTSIDE GREEN PRINTED),QTY-10NOS(2)MSCN PARASOL OF DIA 2.2m (OUTSIDE DESERT PRINTED),QTY-10 NOS.(3)MSCN SCREEN(REVERSIBL E)OF SIZE 7mX7m,QTY-04 NOS.(4)PARASOL FOOT(GROUND POLE ), QTY-05 NOS.(5)EXTENSION TUBE,QTY-05 NOS.(6)SUPPORT POLE ASSY 3m HEIGHT(TELESCOPIC),QTY-06 NOS.(7)GROUND PEGS,QTY-10 NOS. (8)BAG FOR MSCN PARASOL,QTY-20 NOS.(9)BAG FOR MSCN SCREENS (REVERSIBLE),QTY-01 NOS.(AS PER DOC.NO.GCF/50/40259.

ART.NO.1155287D

H.T.BRASS INGOTS TO SPCN. IS-304 1981 GRADE-3

H.T.BRASS INGOTS TO SPCN. IS-304 1981 GRADE-3

BRASS INGOTS IS:1264-1997, GRADE-DCB1

BRASS INGOTS IS:1264-1997, GRADE-DCB1

BLENDED FABRIC POLYESTER & COTTON (67:33) UNDYED FOR SUPPLY DROPPING PARACHUTES

Specification No. IND/TC/3038 With conditions attached as Appendix 'A'

• As Per Specification/Drawing

• As Per Specification/Drawing

LEADED BRASS INGOT AS PER IS:292-1983,DESIGNATION LCB 1.

LEADED BRASS INGOT AS PER IS:292-1983,DESIGNATION LCB 1.

BRASS ROD 6 MM DIA IS-319/1989 GDE -1/ HALF HARD.MCT-1158/1. BRASS,CUZN 37 TO IS:410-1977

BRASS ROD 6 MM DIA IS-319/1989 GDE -1/ HALF HARD.MCT-1158/1. BRASS,CUZN 37 TO IS:410-1977

BRASS SHEET 6.35 MM IS -319 GD-1 HB

BRASS SHEET 6.35 MM IS -319 GD-1 HB

BRASS INGOTS TO SPEC. DCB 2 OF IS:1264-1997

BRASS INGOTS TO SPEC. DCB 2 OF IS:1264-1997

BRASS ROD 25 MM DIA. BS:2874/CZ-122 M

BRASS ROD 25 MM DIA. BS:2874/CZ-122 M

EXTRUDED SECTION, ODD/M/948/1 BRASS TO IS 320-1980 GDE.HT-2

EXTRUDED SECTION, ODD/M/948/1 BRASS TO IS 320-1980 GDE.HT-2

BRASS ROD 13MM(1/2") DIA.TO SPECN. IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 13MM(1/2") DIA.TO SPECN. IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 25 MM DIA TO SPCN. IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 25 MM DIA TO SPCN. IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 60 MM DIA. GRADE HT-2 COLD WORK TO IS:320-1980

BRASS ROD 60 MM DIA. GRADE HT-2 COLD WORK TO IS:320-1980

BRASS ROD 19 MM DIA. GRADE HT-2,CONDITION-M OF IS:320-1980

BRASS ROD 19 MM DIA. GRADE HT-2,CONDITION-M OF IS:320-1980

BRASS ROD 13 MM DIA. GRADE-2 HB TO IS:319-2007

BRASS ROD 13 MM DIA. GRADE-2 HB TO IS:319-2007

BRASS HAXAGON 17MM IS:319-2007, GRADE-1, 1/2 HARD(HB)

BRASS HAXAGON 17MM IS:319-2007, GRADE-1, 1/2 HARD(HB)

BRASS FLAT 3/8" X 7/8" TO SPECIFICATION CU ZN 30 HB TO IS:410-1977

BRASS FLAT 3/8" X 7/8" TO SPECIFICATION CU ZN 30 HB TO IS:410-1977

NON-MAGNETIC BRASS ROD 4.87MM DIA SPECI. GDE1HB TO IS:319-1989 (CONTENTS SHOULD NOT BE MORE THAN 0.05%)

NON-MAGNETIC BRASS ROD 4.87MM DIA SPECI. GDE1HB TO IS:319-1989 (CONTENTS SHOULD NOT BE MORE THAN 0.05%)

BRASS WIRE 5MM (3/16") DIA TO SPEC. IS-8364, GD-I , HALF HARD

BRASS WIRE 5MM (3/16") DIA TO SPEC. IS-8364, GD-I , HALF HARD

BRASS ROD 6MM DIA. SPECN. GDE-1 HB OF IS:319-1989

BRASS ROD 6MM DIA. SPECN. GDE-1 HB OF IS:319-1989

NON MAGNETIC BRASS ROD 9.50MM IS:319-1989 GR-I, HB (FE NOT MORE THAN 0.05% )

NON MAGNETIC BRASS ROD 9.50MM IS:319-1989 GR-I, HB (FE NOT MORE THAN 0.05% )

N.M. BRASS ROD 35.00 MM DIA IS-319-1989/GDE -1 HB(FE CONTENT RESTRI CTED TO 0.05% OR LESS) NOTE:NON-MAGNTIC PROPRTY WLL BE CHEKD BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.

N.M. BRASS ROD 35.00 MM DIA IS-319-1989/GDE -1 HB(FE CONTENT RESTRI CTED TO 0.05% OR LESS) NOTE:NON-MAGNTIC PROPRTY WLL BE CHEKD BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.

NON MAG.BRASS ROD 31.00 MM DIA AS PER IS-319-1989 GDE-1 HB (FE. CONTANTS SHOULD NOT BE MORE THAN 0.05%)

NON MAG.BRASS ROD 31.00 MM DIA AS PER IS-319-1989 GDE-1 HB (FE. CONTANTS SHOULD NOT BE MORE THAN 0.05%)

N.M. BRASS ROD 25.00 MM DIA TO SPECN. IS-319/ GDE-1HB (F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)

N.M. BRASS ROD 25.00 MM DIA TO SPECN. IS-319/ GDE-1HB (F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)

N.M. BRASS ROD 7/8" DIA TO SPECN. IS-319-1989/ GDE-I (F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)

N.M. BRASS ROD 7/8" DIA TO SPECN. IS-319-1989/ GDE-I (F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)

NON MAG. BRASS 12.70 MM DIA. TO SPECN. IS-319-1989 GDE-1 (IRON CONTENTS NOT TO EXCEED 0.05% ).

NON MAG. BRASS 12.70 MM DIA. TO SPECN. IS-319-1989 GDE-1 (IRON CONTENTS NOT TO EXCEED 0.05% ).

N.M.BRASS ROD 7/16" OR 11 MM DIA IRON CONTAIN NOT EXCEED 0.05% IS:319-1989/ GRADE-IHB

N.M.BRASS ROD 7/16" OR 11 MM DIA IRON CONTAIN NOT EXCEED 0.05% IS:319-1989/ GRADE-IHB

NON MAGNETIC BRASS ROD 9.52 MM DIA TO SPECIFICATION IS-319-1989 GDE-HB (F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)

NON MAGNETIC BRASS ROD 9.52 MM DIA TO SPECIFICATION IS-319-1989 GDE-HB (F.E. CONTENTS SHOULD NOT BE MORE THAN 0.05 %)

NON MAGNETIC BRASS ROD 6.35MM DIA SPECIFICATION IS-319-1989/GRADE-I HB (IRON CONTENT 0.05% MAXIMUM.)

NON MAGNETIC BRASS ROD 6.35MM DIA SPECIFICATION IS-319-1989/GRADE-I HB (IRON CONTENT 0.05% MAXIMUM.)

BRASS ROD 48 MM DIA TO SPEC. IS:319-1989,GDE-1,HARD(HD).

BRASS ROD 48 MM DIA TO SPEC. IS:319-1989,GDE-1,HARD(HD).

BRASS ROD 70 MM (2-3/4") DIA TO SPECIFICATION IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 70 MM (2-3/4") DIA TO SPECIFICATION IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 38 MM DIA SPEC. IS:319-2007, GDE I , 1/2 HARD

BRASS ROD 38 MM DIA SPEC. IS:319-2007, GDE I , 1/2 HARD

BRASS ROD 35MM(1-3/8") DIA.TO IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 35MM(1-3/8") DIA.TO IS:319-2007,GDE-1, HB (HALF HARD)

NAI(J) 501/6/3(P) FOR Fz DASD AK-630

NAI(J) 501/6/3(P) FOR Fz DASD AK-630

SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION

SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION

BRASS ROD 32.MM DIA TO SPECIFICATION IS:319-2007, GDE-1, HB (HALF HARD)

BRASS ROD 32.MM DIA TO SPECIFICATION IS:319-2007, GDE-1, HB (HALF HARD)

BRASS ROD 25 MM DIA SPECN. IS-319/1989 GDE-1/HALF HARD

BRASS ROD 25 MM DIA SPECN. IS-319/1989 GDE-1/HALF HARD

BRASS ROD 1/8"DIA.IS-319

BRASS ROD 1/8"DIA.IS-319

BRASS ROD 56 MM DIA IS:319-2007, GDE-1, HALF HARD(HB)

BRASS ROD 56 MM DIA IS:319-2007, GDE-1, HALF HARD(HB)

BRASS ROD 51 MM DIA.IS-319/GDE-1 /HB

BRASS ROD 51 MM DIA.IS-319/GDE-1 /HB

BRASS ROD 40 MM DIAMETER TO SPEC. IS-319/ALLOY GRADE 1. IS:319 40 MM BRASS ROD

BRASS ROD 40 MM DIAMETER TO SPEC. IS-319/ALLOY GRADE 1. IS:319 40 MM BRASS ROD

BRASS ROD 29 MM DIA TO SPCN. IS-319/1989 TYPE-1,1/2 HARD

BRASS ROD 29 MM DIA TO SPCN. IS-319/1989 TYPE-1,1/2 HARD

BRASS ROD 25 MM DIA GRADE-FLB OF IS:6912-2005

BRASS ROD 25 MM DIA GRADE-FLB OF IS:6912-2005

BRASS ROD 21.MM. DIA. TO SPECIFICATION IS-319-1989 GD.1 HB.

BRASS ROD 21.MM. DIA. TO SPECIFICATION IS-319-1989 GD.1 HB.

BRASS ROD 11MM DIA TO SPECIFICATION IS-319, TYPE-1, 1/2 HARD.

BRASS ROD 11MM DIA TO SPECIFICATION IS-319, TYPE-1, 1/2 HARD.

BRASS ROD 10 MM(3/8") DIA. TO SPEC. IS:319-2007,GDE-1, HB (HALF HARD) (NOT IN COIL FORM)

BRASS ROD 10 MM(3/8") DIA. TO SPEC. IS:319-2007,GDE-1, HB (HALF HARD) (NOT IN COIL FORM)

BRASS ROD 65 MM DIA TO SPECIFICATION IS:319-2007, GDE 2, HB

BRASS ROD 65 MM DIA TO SPECIFICATION IS:319-2007, GDE 2, HB

BRASS ROD 57 MM DIA. IS:319-2007, GD-II, HB

BRASS ROD 57 MM DIA. IS:319-2007, GD-II, HB

BRASS ROD 51 MM DIA. GRADE-2 HB TO IS:319-2007

BRASS ROD 51 MM DIA. GRADE-2 HB TO IS:319-2007

BRASS ROD 48 MM DIA TO SPCN. IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 48 MM DIA TO SPCN. IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 35 MM DIA. GRADE-2, HB TO IS:319-2007

BRASS ROD 35 MM DIA. GRADE-2, HB TO IS:319-2007

BRASS ROD 33.MM. DIA TO SPECEFICATION IS-319/TYPE-II(GD-2)1/2 HARD-1989.

BRASS ROD 33.MM. DIA TO SPECEFICATION IS-319/TYPE-II(GD-2)1/2 HARD-1989.

BRASS ROD 32 MM DIA. GRADE-I HB OF IS:319-1989

BRASS ROD 32 MM DIA. GRADE-I HB OF IS:319-1989

BRASS ROD 29 MM DIA. GRADE-2, HB TO IS:319-2007

BRASS ROD 29 MM DIA. GRADE-2, HB TO IS:319-2007

BRASS ROD 19 MM DIATO SPECN IS: 319-2007, GDE-1, HB

BRASS ROD 19 MM DIATO SPECN IS: 319-2007, GDE-1, HB

BRASS ROD 16 MM DIA TO SPECEFICATION IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 16 MM DIA TO SPECEFICATION IS:319-2007,GDE-1, HB (HALF HARD)

BRASS ROD 20 MM DIA. IS:319/CU ZN 42 PB 3

BRASS ROD 20 MM DIA. IS:319/CU ZN 42 PB 3