CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573R NOTE: REVOLVER CLIP COVER OF BUFF BURNISH (HARNESS LEATHER) DRUM DYED AS PER IS:580 COLOUR:BLACK/BROWN/BURGANDI

CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573R NOTE: REVOLVER CLIP COVER OF BUFF BURNISH (HARNESS LEATHER) DRUM DYED AS PER IS:580 COLOUR:BLACK/BROWN/BURGANDI

DRG. NO. SK- 5573R

CLIP COVER FOR ANMOL .32(7.65MM)REVOLVER DRG. NO. SK-5706R

CLIP COVER FOR ANMOL .32(7.65MM)REVOLVER DRG. NO. SK-5706R

SK-5574R

CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142

CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142

DRG.NO.SK-4142

AS PER DRAWING DS CAT NO 1005-00966

AS PER DRAWING DS CAT NO 1005-00966 DC (I) NO 25859 SA DT 10.09.03

CENTRE PIN TO DS CAT NO. 5315-009119 DC(I) NO. 26372-SA DT. 16-08-07 IN FINISHED CONDITION

CENTRE PIN TO DS CAT NO. 5315-009119 DC(I) NO. 26372-SA DT. 16-08-07 IN FINISHED CONDITION

DS CAT NO. 5315-009119

CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08, THROUGH MIM ROUTE.

CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08, THROUGH MIM ROUTE.

DRG NO PHMK-III-7-2

CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (WITHOUT HEAT TREATMENT) ,THROUGH MIM ROUTE.

CATCH BARREL TO DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (WITHOUT HEAT TREATMENT) ,THROUGH MIM ROUTE.

PH-1-5

CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION

CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION

DRG NO.PHMK-II-6-4

DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681 SA DT 11.02.03

CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681 SA DT 11.02.03

CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE

CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE

BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB

BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB

DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217

• Machining

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1

BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1

DRG/DSCAT NO 1005-000835

BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99

BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99

PH-5-2

BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99

BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99

DRG. NO. PH-5-3

VARNISH AC-583 TO SPECIFICATION NO.TY 6-10-1121-79.

TY 6-10-1121-79.

TRICHLOROETHYLENE, TECHNICAL,TYPE I TO SPECN.IS-245-1988 (THIRD REVISION), AMMENDMENT 2, REAFFIRMED 2001.

IS-245-198

2-TRINITROPHLOROGLUCINOL (TNPG) AS PER SPECIFICATION NO. IND/ME/954(PROV)-1997.

IND/ME/954(PROV)-1997

SPIRIT RECTIFIED GRADE-1 TO SPECIFICATION NO.IS:323-1959 WITH AMENDMENT NO.2, REAFFIRMED : 2001.

IS:323-1959

SPECIAL THINNER LB-7873B FOR PINAKA ROCKET

SPECIAL THINNER LB-7873B FOR PINAKA ROCKET

SODIUM NITRITE, TECHNICAL TO SPECN. NO. JSS 6810-104:1993 DC NO.3112-ME DT. 23-02-94.

JSS 6810-104:1993

SODIUM HYDROXIDE PELLETS AR TO SPECIFICATION IS: 376-1986 (THIRD REVISION) NOTE: TO BE SUPPLIED IN 1.000 KG PACKING MAKE: GLAXO, RANKEM, SD FINE OR E-MERCK.

IS: 376-1986

SODIUM AZIDE (CRYSTAL) FOR MANUFACTURE OF INITIATORS TO SPCN JSS-6810-79:2003 (REVISION NO.1) DC-3788-ME DT.25-09-2003. (GLAXO,RANKEM, SD FINE, OR E-MERCK MAKE ONLY).

JSS-6810-79:2003

SODA ASH TECHNICAL (LIGHT GRADE) TO SPECN. NO. IS: 251- 1998 (FOURTH REVISION).

IS: 251- 1998

SILICA GEL FILLED CAMBRIC BAG TO DRG.NO. SK-1900-A

SILICA GEL FILLED CAMBRIC BAG TO DRG.NO. SK-1900-A

DRG.NO. SK-1900-A.

SHELLAC,FLAKES TO SPECIFICATION NO.JSS-8010-17 DC 3247-ME DT.14/01/1995.

JSS-8010-17

OIL EXTENDED POLYBUTADIENE RUBBER ( SYNAPRENE RUBBER ) OR OIL EXTENDED COPOLYMER OF BUTADIENE AND STYRENE TO SPCN.NO.S.1712 AS PER SPECIFICATION NO.IND/ME/815(PROV) DC.NO. 3754-ME DT.12/12/2002.

IS.1712 AS PER SPECIFICATION NO.IND/ME/815(PROV)

EPOXY RESINS MODIFIED OF GRADE K-201 TO SPECIFICATION NO. TY 6-05-1251-75

TY 6-05-1251-75 .

RED LEAD FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION, SPECN.IS-8063:1976,REAFFIRMED 1998.

IS-8063:1976

MAGNESIUM POWDER GR.B (MEDIUM DENSITY) APPARENT DENSITY 0.65 TO 0.85 G/ML TO SPECN.IS-2307-1977 (1 ST REV.) ( WITH AMENDMENT NO.1 (REAFFIRMED - 1991 ) 100% TO PASS THROUGH 72 BSS(212 MICRON IS SIEVE) AND TO RETAIN ON 240 BSS (63 MICRON IS SIEVE)-85% MINIMUM. METAL CONTENT - 98% MINIMUM.

IS-2307-1977

ALUMINIUM POWDER, HEAVY GR-1, SIZE 250 MICROMETRE IS SIEVE TO SPECN. NO. JSS 1370-03-2007, REVISION NO.3, DC NO.3934-ME, DT.04.04.2009.

JSS 1370-03-2007

POTASSIUM PERCHLORATE 100% TO PASS THROUGH 100 BSS & MINIMUM 40% TO RETAIN ON 240 BSS SPECN.NO.JSS 6810-58:2009,DC-3959- ME DT.24.05.2009 (REV.NO.3)

JSS 6810-58:2009,

POTASSIUM CHLORATE GR-I TO SPECN. NO.IS:708-1987, (SECOND REV.)(REAFFIRMED-2005).

IS:708-1987

LOW DENSITY POLYETHYLENE TYPE-2 (GRANULES BLACK COLOUR) TO SPECN.NO. IS:3395-1997 (2ND REV)

IS:3395-1997

POLYTHENE MOULDING POWDER (LOW DENSITY)TO JSS:9330-03:2007, (REVISION NO.2) DC 3909-ME DT.21/07/2008.

JSS: 9330-03: 2007

POLY SULPHIDE SEALANT RDL-930S, NOTE: TO BE PACKED IN 250 GM CONTAINER.

POLY SULPHIDE SEALANT RDL-930S, NOTE: TO BE PACKED IN 250 GM CONTAINER.

POLYETHYLENE POLYAMINES TO SPECN. NO. TY 6-02-594-80 .

TY 6-02-594-80

PALE YELLOW PAINT, SPECIFICATION NO.: IS-5:2007, ISC NO.356TO IS: 138.

IS-5:2007, ISC NO.356 TO IS: 138

PAINT READY MIXED AIRDRYING MARKING BLACK FOR PACKAGES AND PETROL CONTAINERS TO SPECN IS-138-1992 (THIRD REV) R.A-1999 SPECIAL REQUIREMENT -GLOSS VALUE -31 TO 50 AT 45 DEG. CEL. FOR DEFENCE USE. MODE OF APPLICATION- STENCILLING.

SPECN IS-138-1992

PAINT RFU AMMUNITION FINISHING AIR DRYING MATT FINISH SPRAY ING FOR GENERAL PURPOSE LIGHT GREY ISC 631 OF IS-5:1994(FOUR TH REVISION)(AMDT.1)TO SPECIFICATION IS-168:1993(THIRD REVISION) APPLICABLE FOR DEFENCE USE.

IS-168:1993

PAINT READY MIXED AIR DRYING SEMI GLOSSY FINISH LIGHT BRUNSWICK GREEN FOR GENERAL PURPOSE ISC 225 OF IS-5-1994 (FOURTH REVISION) ( AMENDMENT NO.1) TO SPECN IS: 168-1993 (THIRD REVISION) (R.A-2002) MODE OF APPLICATION : BRUSHING (AS APPLICABLE FOR DEFENCE USE)

IS: 168-1993

PAINT READYMIXED MARKING FOR PACKAGES AND PETROL CONTAINERS FINISH GOLDEN YELLOW ISC-356 OF IS-5-94 TO SPECN.IS-138-1992 (THIRD REVISION) AS APPLICABLE FOR DEF.USE.MODE OF APPLICATION STENCILLING (PACKED IN 4 LIT. TIN) SPECIAL REQUIREMENTS WITH GLOSS VALUE 31 TO 50 AT 45 DEG. CEL.

IS-138-1992

PAINT READY MIXED AIR DRYING SEMI-GLOSSY FINISH BLACK FOR GENERAL PURPOSE TO SPECN IS:168-1993 (THIRD REV.) (RA-2002) AS APPLICABLE FOR DEFENCE USE. MODE OF APPLICATION- BRUSHING

IS:168-1993

OKS SUPER 420 HIGH-PRESSURE, MULTI-PURPOSE GREASE.

OKS SUPER 420 HIGH-PRESSURE, MULTI-PURPOSE GREASE.

NORMAL BUTYL ALCOHOL (TECH)TO SPECIFICATION IS: 361-1973, (WITH AMENDMENT-2)(2ND REV.) (REAFFIRMED-1996).

IS: 361-1973

NITRO CELLULOSE MASTIC TO SPECIFICATION NO. GOST B 84-75-75 .

GOST B 84-75-75 .

NITRIC ACID 53% TO 57% (TECH) TO SPECIFICATION NO.IS-264-1976 (SECOND REVISION WITH AMENDMENT NO.2) REAFFIRMED 1995. NOTE: IT IS SUPPLIED IN POLYETHYLENE CONTAINERS FITTED WITH TIGHT TEFLON WASHER (THICKNESS 0.02MM) & STOPPERED WITH HDPE. & WEIGHT OF FILLED CONTAINER SHOULD NOT BE MORE THAN 20 KG

IS-264-1976

METRO ARK SILICONE 17 COMPOUND (SILICONE GREASE).SPECN.IND/ME/989 (PROV) DC NO. 3545-ME DT.10-12-98.

IND/ME/989 (PROV)

LACQUER: CLEAR NITROCELLULOSE TO SPECIFICATION JSS-8010-42 : 1999 DC NO.3864- ME DT. 01-08-2005.

JSS-8010-42 : 1999

HARDNER FOR EPOXY BASED SEALANT TO SPECIFICATION NO.IND/ME/ 924(PROV) DC NO.3067-ME DT.29/12/93 (ARALDITE HV 953U/LAPOX K-31). (TO BE SUPPLIED IN 800 GRAMS PACKING).

IND/ME/924 (PROV)

HARDNER 758 FOR CEMENT DOBECKOT.

HARDNER 758 FOR CEMENT DOBECKOT.

GUN POWDER SFG-20, SPECN. NO. JSS-1376-05: 2005,(REV. NO.2) DC NO. 3935-ME DATED 04.04.2009.

JSS-1376-05: 2005

GUN POWDER MEALED, SPECN.NO. JSS 1376-05-2005,(REV. NO.2) DC NO. 3935-ME DT.04.04.2009.

JSS 1376-05-2005

GUN POWDER G-7, SPECN. NO. JSS 1376-05: 2005, REVISION NO.2 DC NO.3935-ME DT.04.04.2009.

JSS 1376-05: 2005

GUN POWDER G-40,SPECN : JSS 1376-05:2005, REVISION NO.2 DC NO. 3935-ME DATED 04/04/2009

JSS 1376-05:2005

GUN POWDER G-20, SPECN. NO. JSS-1376-05-2005,REVISION NO.2DC NO. 3935-ME, DT.04.04.2009.

JSS-1376-05-2005

GUN POWDER G-12, SPECN. NO. JSS 1376-05: 2005, REVISION NO.2 DC NO.3935-ME DT.04.04.2009

JSS 1376-05: 2005

GRAPHITE DRY SULPHUR FREE,SIZE 90 MICROMETRE IS SIEVE (99 % MINIMUM) TO SPECIFICATION NO.JSS 9620-01:2010(REVISION.NO.2) DC-5012-ME.

JSS 962001:2010

PHENOL POLYVINYL ACETAL GLUES GR.BF-4 TO SPECIFICATION NO. GOST 12172-74 .

GOST 12172-74 .

GARDACID MZ FOR PINAKA ROCKET

GARDACID MZ FOR PINAKA ROCKET

EPOXYACRYLIC POLYSILOXINE ENAMEL A.C. GREY PAINT FOR PINAKA ROCKET

EPOXYACRYLIC POLYSILOXINE ENAMEL A.C. GREY PAINT FOR PINAKA ROCKET

RESIN FOR EPOXY BASED SEALANT TO SPECIFICATION NO.IND/ME/924 (PROV.); DC NO. 3067-ME DT.29/12/93. ( ARALDITE AW 106/ LAPOX A-31) (TO BE SUPPLIED IN 1 KG NET WEIGHT PACKING).

IND/ME/924 (PROV.);

EPOXY BASED SEALANT (RESIN & HARDNER) PIDILITE IND.LTD. MAKE (FIVITITE) NET WEIGHT 1.8 KG (1 KG OF RESIN & 0.8 KG OF HARDNER).

IND/ME/924(PROV)

DYE, RHODAMINE 'B' BASE, DERIVED FROM COLOUR INDEX NO.749 (COLOUR-RED) TO SPECIFICATION NO. JSS 6820-03: 2009 (REV.NO. 2) DC NO. 4047-ME DT. 08/01/2010.

JSS 6820-03: 2009

DISPERSANT, AROMATIC SULPHONIC ACID (BELLOID TD ACID) CONDENSA TE, ANIONIC,COLLOID PROTECTIVE (COMPATIBLE WITH ALL NON-IONIC AND ANIONIC ACTIVE COMPOUNDS).

DISPERSANT, AROMATIC SULPHONIC ACID (BELLOID TD ACID) CONDENSA TE, ANIONIC,COLLOID PROTECTIVE (COMPATIBLE WITH ALL NON-IONIC AND ANIONIC ACTIVE COMPOUNDS).

DICHLOROMETHANE(CH2CL2),MAKE:SDFINE/SRL/MERCK/SPECTROCHEM TO ARDE SPECIFICATION NO. ARDE/SPECN/PINAKA/RKT-08 ISSUE 02OF JULY 2015.

ARDE/SPECN/PINAKA/RKT-08 ISSUE 02 OF JULY 2015

COPPER NAPHTHENATE TO SPECN. IS-1078 :1987 (SECOND REVISION) REAFFIRMED 1997

IS-1078 :1987

COMPOSITION SR 227A TYPE B SPECN. NO. L 9620B(A)

L 9620B(A)

AMMUNITION PROTECTIVE COMPOSITION NO. 230 (CEMENT RD 1279, POLYSTYRENE CEMENT) TO SPECN. NO. JSS 8030-41:2006,DC NO.4031-ME, DT.08.01.2010.

JSS 8030-41:2006

CEMENT DOBEKOT-505 TO BE SUPPLIED IN ONE KG CONTAINER

CEMENT DOBEKOT-505 TO BE SUPPLIED IN ONE KG CONTAINER

CAUSTIC SODA TECH.FLAKE IS-252-1991(THIRD REVISION).

IS-252-1991

BLOCK TO DRAWING NUMBER 3-027321 DETAIL NUMBER 16 DC 36050-AMATERIAL: EBONITE TYPE-I UNLOADED TO SPECIFICATION IS:6693

IS:6693

DRAWING NUMBER 3-027321 DETAIL NUMBER 16

BARIUM CHROMATE TO SPECN.NO.IND/ME/794(A) FOR DELAY COMPOSITION ME412(M)(SPECN.NO.IND/ME/820(A)). MEAN DIAMETER OF AVERAGE PARTICLES SHOULD BE MAX. 3 MICRO-METRES.

IND/ME/794(A)

BARIUM PEROXIDE GRADE-I TO SPECIFICATION NO.JSS-6810-96:2004 DC-3831-ME DT.25/01/2005 (REVISION NO.1).

JSS-6810-96:2004

APC-223 TO SPECIFICATION NO.JSS 8010-63:2004 (REVISION NO.2) DC NO. 3841-ME FOR FUZE B-429 ASSY.

JSS 8010-63:2004 FOR FUZE B-429 ASSY.

APC 219 UNDYED TO SPECIFICATION NO. JSS 8010-48: 2004 (REV. NO.1) DC NO. 3842-ME.

JSS 8010-48 : 2004

APC NO. 213 (RD 1177 BLUE) TO SPECIFICATION NO.JSS 8010-41 : 2006, REVISION NO.3 DC NO. 4011-ME DT.08-01-2010

JSS 8010-41 :2006

A.P.C. 210 U/D(N.C.LACQUER) TO SPECIFICATION NO.JSS-8010-64: 2009 (REVISION NO.2) DC 3981-ME DT.24/09/2009

JSS-8010-64:2009

AMMUNITION PROTECTIVE COMPOSITION NO.104, LACQUER, NITROCELLULOSE, RD 1198 D, TO SPECN.NO. JSS 8010-45:2004 (REV.NO.1) DC NO. 3862-ME DT.01.08.2005.

JSS 8010-45:2004

VARNISH, NITROCELLULOSE, RD 1198 B (A.P.C. NO. 103) TO SPECIFICATION NO. IND/ME/368 (C) DC NO. 3754-ME.

IND/ME/368 (C)

AMMN. PROTECTIVE COMPOSITION NO.7 (LUTING MK-6, RD 1178) TO SPECN.JSS 8030-19:2003 (REV.NO.1) DC 3821-ME DT.02-09-2004

JSS 8030-19:2003 Revision No- 1