TIN BRONZE INGOTS-NON MAGNETIC,IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.).NOTE:NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.
Specification
TIN BRONZE INGOTS-NON MAGNETIC,IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.).NOTE:NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.
Drawing no.
Manufacturing Technology
As per OFB Letter No.OFB/108/Online VR/QC dtd. 12.02.2019 with Annexure-A.
MANUFACTURING AND SUPPLY OF FRAME AS PER DRG NO MTSK 207 1100 11
Specification
MANUFACTURING AND SUPPLY OF FRAME AS PER DRG NO MTSK 207 1100 11
Drawing no.
Manufacturing Technology
MANUFACTURING FACILITIES FOR OFFERED STORE IS REQUIRED.
IF THE FACILITY IS NOT AVAILABLE WITH THE FIRM THE FIRM SHOULD SUBMIT THE SUITABLE DOCUMENTS FOR ESTABLISHED WORKING ARRANGEMENT WITH OTHER FIRMS HAVING THAT ARRANGEMENT
COPPER TO ASTM B-152 C10200(O) PURITY 99.55% (MIN) TEMPER: SHEET SHALL BE PRODUCED BY HOT ROLLING & SUBSEQUENTLY ANNEALING (O), TENSILE ST:205 TO 260 MPa, ROCKWELL HARDNESS: 65 (MAX), SIZE:- L = 500MM, W= 189.50 MM OR ITS MULTIPLE WIDTH, THICKNESS 2 + 0.1 MM FOR LINER FOR RIGID CUTTING CHARGE 100 MM
Specification
COPPER TO ASTM B-152 C10200(O) PURITY 99.55% (MIN) TEMPER: SHEET SHALL BE PRODUCED BY HOT ROLLING & SUBSEQUENTLY ANNEALING (O), TENSILE ST:205 TO 260 MPa, ROCKWELL HARDNESS: 65 (MAX), SIZE:- L = 500MM, W= 189.50 MM OR ITS MULTIPLE WIDTH, THICKNESS 2 + 0.1 MM FOR LINER FOR RIGID CUTTING CHARGE 100 MM
COPPER TO ASTM B-152 C10200(O) PURITY 99.55% (MIN) TEMPER: SHEET SHALL BE PRODUCED BY HOT ROLLING & SUBSEQUENTLY ANNEALING (O), TENSILE ST:205 TO 260 MPa, ROCKWELL HARDNESS: 65 (MAX), SIZE:- L = 500MM, W= 172 MM OR ITS MULTIPLE WIDTH, THICKNESS 2 + 0.1 MM FOR LINER FOR RIGID CUTTING CHARGE 85 MM
Specification
COPPER TO ASTM B-152 C10200(O) PURITY 99.55% (MIN) TEMPER: SHEET SHALL BE PRODUCED BY HOT ROLLING & SUBSEQUENTLY ANNEALING (O), TENSILE ST:205 TO 260 MPa, ROCKWELL HARDNESS: 65 (MAX), SIZE:- L = 500MM, W= 172 MM OR ITS MULTIPLE WIDTH, THICKNESS 2 + 0.1 MM FOR LINER FOR RIGID CUTTING CHARGE 85 MM
PARTED STEEL BILLET TO OFAJ DRG. NO.F-467 D & OFAJ DRG/SPECN F-345 G FOR 125MM HE SHELL
Specification
OFAJ DRG or SPECN F 345
Drawing no.
OFAJ DRG. NO.F-467 D
Manufacturing Technology
Clause No Description
1 (A) Essential Eligibility Criteria. The firm should essentially have following facilities: 1. Blast Furnace with LD Converter (Basic Oxygen Furnace) OR Electric ARC furnace OR Induction Furnace
2 Firm should be able to supply minimum 1000 nos. of Parted Steel Billets per heat batch.
3 Ladle Refining furnace along with Argon purging system.
4 Vacuum degassing furnace along with Argon purging system.
5 Continuous caster OR Bottom pouring ingot casting facilities.
6 Soaking Pits or Pre heating Furnaces.
7 Rolling mill to maintain reduction ratio of at least 6:1.
8 Annealing or Normalizing Furnaces.
Testing / Inspection Facility
9 Optical emission Spectrometer.
10 Carbon Sulphur Analyzer.
11 Temperature measuring facilities during melting/casting.
12 Mechanical test facilities, as applicable.
13 Metallography facilities for Micro and Macro Analysis.
14 Ultrasonic testing facilities with qualified Personnel.
15 (B) Desirable Eligibility Criteria: Firm should have successfully executed supply orders for similar caliber ammunition in past. Supply order copies to be attached/uploaded along with T.E
Clause No Description
1 (A) Essential Eligibility Criteria. The firm should essentially have following facilities: 1. Blast Furnace with LD Converter (Basic Oxygen Furnace) OR Electric ARC furnace OR Induction Furnace
2 Firm should be able to supply minimum 400 nos. of Parted Steel Billets per heat batch.
3 Ladle Refining furnace along with Argon purging system.
4 Vacuum degassing furnace along with Argon purging system.
5 Continuous caster OR Bottom pouring ingot casting facilities.
6 Soaking Pits or Pre heating Furnaces.
7 Rolling mill to maintain reduction ratio of at least 6:1.
8 Annealing or Normalizing Furnaces.
9 Optical emission Spectrometer.
10 Carbon Sulphur Analyzer.
11 Temperature measuring facilities during melting/casting.
12 Mechanical test facilities, as applicable.
13 Metallography facilities for Micro and Macro Analysis.
14 Ultrasonic testing facilities with qualified Personnel.
15 (B) Desirable Eligibility Criteria: Firm should have successfully executed supply orders for similar caliber ammunition in past. Supply order copies to be attached/uploaded along with T.E
00
1800
Number
1446
TE NO 190401P2FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
FABRIC NYLON 32GM U/D 107CM MIN. WIDTH EXLUDING SELVEDGE
Specification
ADRDE/QMS/TDTM/SPECN/95 WITH FOLLOWING NOTE:-
(i) THE NYLON MULTIFILAMENT YARN WHICH IS TO BE USED TO MANUFACTURE THE FABRIC SHOULD HAVE A MINIUM TENACITY OF 6.5GMS PER DENIER.
(II) THERE SHOULD NOT BE ANY TYPE OF YARN DISTORTION/YARN SLIPPAGE IN THE FABRIC.
MIRROR ASSY.AS PER DRG.NO.142 1 01 03 04 01 000 (COMPLETE).NOTE:SPECIAL TERMS AND CONDITIONS AS PER ANNEXURE-A
ASSEMBLED RECEIVER ASSY AS PERDRG.NO. 142 1 01 03 04 02 000, CONSISTING OF ALL THECOMPONENTS AS PER PER SCHEDULE OF ABOVE DRG.NO.
ASSEMBLED L-3 ASSY. AS PER DRG.NO. 142 1 01 03 04 03 000,CONSISTING OF ALL THE COMPONENTS AS PER SCHEDULEOF ABOVE DRG.NO.
ASSEMBLED TX ASSY.AS PER DRG.NO. 142 1 01 03 04 04 000,CONSISTING OF ALL THE COMPONENTS AS PER SCHEDULEOF ABOVE DRG.NO.
ASSEMBLED MOUNT BRACKET ASSY.AS PERDRG.NO.142 1 01 03 04 05 000, CONSISTING OF ALL THECOMPONENTS AS PER SCHEDULE OF ABOVE DRG.NO.
FOR REST OF THE DRAWINGS PLEASE REFER TO THE TENDER ENQUIRY NO. O240-20 ON OFB EPROCUREMENT
MIRROR ASSY.AS PER DRG.NO.142 1 01 03 04 01 000 (COMPLETE).NOTE:SPECIAL TERMS AND CONDITIONS AS PER ANNEXURE-A ASSEMBLED RECEIVER ASSY AS PERDRG.NO. 142 1 01 03 04 02 000, CONSISTING OF ALL THECOMPONENTS AS PER PER SCHEDULE OF ABOVE DRG.NO. ASSEMBLE
NON FERROUS MATERIAL - MANGANESE PURE (ELECTROLYTIC) CONTENT OF Mn-99.5%
ITEM CODE : 0865073000 (VIRGIN MATERIAL)
Specification
MANGANESE PURE (ELECTROLYTIC) CONTENT OF Mn-99.5% WITH CHEMICAL COMPOSITION: Al - 0.25% Max., Cu - 0.1% Max., Fe - 0.15% Max., Si - 0.02% Max., Pb - 0.005% Max., Mn - REMAINDER (NOT LESS THAN 99.5%)
"CONVERSION FORGING TO DRG.NO.: 62C 2519 200 D2.
MATERIAL WILL BE ISSUED BY OFT
REQD.FOR ROCKING BAR A2519 6P11-2-19, DSCAT.NO. 1005-007319
"
Specification
AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2519 200 D2.
MATERIAL WILL BE ISSUED BY OFT
REQD.FOR ROCKING BAR A2519 6P11-2-19, DSCAT.NO. 1005-007319
"
