MIL Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: [email protected] with a copy to the OFB mail id : [email protected]

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

321

HVF/TE0102190209/2019-20/TA/CBOI/SD-OTE dt 03/02/2020

Heavy Vehicle Factory

The Sr.General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054

Name	Code	Quantity	Approx Value	Select
CERAMETALLIC DISC ASSY WITH STAMPED GROOVE TO 6206401014 Physical Verification needed Description CERAMETALLIC DISC ASSY WITH STAMPED GROOVE TO DRG NO. 172.40.032CBCB Specification CERAMETALLIC DISC ASSY WITH STAMPED GROOVE TO DRG NO. 172.40.032CBCB Drawing no. 172.40.032CBCB Manufacturing Technology ATTACHED FIRM_UNDERTAKING.pdf INSTRUCTIONS_FOR_VENDOR_QUALIFICATION_CRITERIA_(VQC).pdf UNDERTAKING.pdf VQC_CERAMETALIC_DISC_ASSY478.pdf Testing / Inspection Facility ATTACHED	62	853 Number
CERAMETALLIC DISC ASSY WITH STAMPED GROOVE TO 6206401013 Physical Verification needed Description CERAMETALLIC DISC ASSY WITH STAMPED GROOVE TO DRG NO. 172.40.031CBCB Specification CERAMETALLIC DISC ASSY WITH STAMPED GROOVE TO DRG NO. 172.40.031CBCB Drawing no. 172.40.031CBCB Manufacturing Technology ATTACHED FIRM_UNDERTAKING.pdf INSTRUCTIONS_FOR_VENDOR_QUALIFICATION_CRITERIA_(VQC).pdf UNDERTAKING.pdf VQC_CERAMETALIC_DISC_ASSY478.pdf Testing / Inspection Facility ATTACHED	62	3381 Number

322

3193000956

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
TRANSFER BAR FOR REVOLVER SIDE SWING Description TRANSFER BAR FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-07/12 SW. Specification TRANSFER BAR FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-07/12 SW. RV-07-12_SW.pdf Drawing no. DRG. NO. RV-07/12 SW. RV-07-12_SW.pdf Manufacturing Technology MIM Annexure_A.pdf Testing / Inspection Facility All component's passed report provided by firm, as dimensional reports & chemical composition report by NABL certified Lab. ( Except this Load test report also to be passed in case of springs) and components also to be checked (dimensional, chemical, load reports) in Factory on sample basic, clearance should be given after passing of components.	70	2625 Number

323

MNF/BAFFLE/OFAJ

Ordnance Factory Ambajhari

The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021

Name	Code	Quantity	Approx Value	Select
CONTACT SPRING TO OFAJ DRG NO FS 3140 Physical Verification needed Description CONTACT SPRING TO OFAJ DRG. NO. FS - 3140 Specification CONTACT SPRING TO OFAJ DRG. NO. FS - 3140 Drawing no. Manufacturing Technology AS PER PQ ATTACHED SPECN_PQ.pdf Testing / Inspection Facility AS PER QMI ATTACHED	00	750 Number

324

O113-19

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
Aluminium Alloy Flat Description Aluminium Alloy Flat 35mm x 85mm, IS-733, 24345 WP Specification Aluminium Alloy Flat 35mm x 85mm, IS-733, 24345 WP Drawing no. Manufacturing Technology AS PER ATTACHED DOCUMENT. OFB_Letter_with_Annexure_A.pdf Testing / Inspection Facility AS PER ATTACHED DOCUMENT.	06	1306 Kilogram
Non Magnetic Brass Strip Description Non Magnetic Brass Strip 1.82 mm thick x 35 mm wide (1-3/8") Specification Non Magnetic Brass Strip 1.82 mm thick x 35 mm wide (1-3/8") Drawing no. Manufacturing Technology As per attached document. OFB_Letter_with_Annexure_A.pdf Testing / Inspection Facility As per attached document.	07	759 Kilogram

325

128MMETT20001880

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL Physical Verification needed Description FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL Specification FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL QMI.PDF Drawing no. TEND 2630 QMI.PDF Manufacturing Technology FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION QMI.PDF Testing / Inspection Facility FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR RAW MATERIAL	70	428 Number
ROD HANDLE Physical Verification needed Description ROD HANDLE TO DRG. NO. 30P 2021 WITH FIRM'S MATERIAL IN FULLY FINISHED REQUIRED FOR 40MM MGL Specification ROD HANDLE TO DRG. NO. 30P 2021 WITH FIRM'S MATERIAL IN FULLY FINISHED REQUIRED FOR 40MM MGL Drawing no. Manufacturing Technology AS PER TE DRAWING.pdf Testing / Inspection Facility AS PER TE	70	737 Number

326

TE NO 190401P2FO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity
MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889 Physical Verification needed Description MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889 Specification MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889 Drawing no. Manufacturing Technology MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889 QAP.pdf Testing / Inspection Facility MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889	90	36 Number
MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892 Physical Verification needed Description MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892 Specification MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892 Drawing no. Manufacturing Technology MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892 QAP.pdf Testing / Inspection Facility MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892	90	36 Number
MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864 Physical Verification needed Description MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864 Specification MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864 Drawing no. Manufacturing Technology MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864 qap.pdf Testing / Inspection Facility MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864	90	36 Number
MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863 Physical Verification needed Description MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863 Specification MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863 Drawing no. Manufacturing Technology MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863 GCF_50_40863_QAP.pdf Testing / Inspection Facility MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863	90	36 Number
MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862 Physical Verification needed Description MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862 Specification MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862 Drawing no. Manufacturing Technology MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862 GCF_50_40862_ANNEXURE_L.pdf Testing / Inspection Facility MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862	90	36 Number
MACHINED CASTING AS PER GCF DRG NO GCF 50 40891 Physical Verification needed Description MACHINED CASTING AS PER GCF DRG NO GCF 50 40891 Specification MACHINED CASTING AS PER GCF DRG NO GCF 50 40891 Drawing no. Manufacturing Technology MACHINED CASTING AS PER GCF DRG NO GCF 50 40891 ANNEXURE_L.pdf Testing / Inspection Facility MACHINED CASTING AS PER GCF DRG NO GCF 50 40891	90	36 Number
MSL LAUNCHER Physical Verification needed Description MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2658 FOR MSL LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL Specification MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2658 FOR MSL LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL Drawing no. Manufacturing Technology AS PER TE 2658.pdf Testing / Inspection Facility AS PER TE	70	647 Number
MSL HOUSING LAUNCHER Physical Verification needed Description MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL Specification MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL 2661qmi.pdf Drawing no. 2661.pdf Manufacturing Technology AS PER TE 2661qmi.pdf Testing / Inspection Facility AS PER TE	70	639 Number
CASE SPIKE COMMON BEACON 1A AS PER DRG NO CII 400 SA 2 Physical Verification needed Description CASE, SPIKE, COMMON, BEACON, 1A AS PER DRG.NO. CII-400/SA-2 Specification CASE, SPIKE, COMMON, BEACON, 1A AS PER DRG.NO. CII-400/SA-2 CII-400-SA-2.pdf Drawing no. complete_drg_CII-400-sa-2.pdf Manufacturing Technology As per drawing CII-400-SA-2.pdf Testing / Inspection Facility As per drawing	74	46 Number
SPIKE COMMON BEACON CASED DRG NO CII 400 Physical Verification needed Description SPIKE COMMON BEACON CASED DRG.NO. CII-400 Specification SPIKE COMMON BEACON CASED DRG.NO. CII-400 SPEC_CII-400.pdf Drawing no. Complete_drg_CII-400.pdf Manufacturing Technology As per drawing. SPEC_CII-400.pdf Testing / Inspection Facility As per drawing	74	432 Number
BOX FOR UNDER WATER STREAM CROSSING EQPT TO 6206607955 Physical Verification needed Description BOX FOR UNDER WATER STREAM CROSSING EQPT TO DRG NO. 172.91.251CBCB Specification BOX FOR UNDER WATER STREAM CROSSING EQPT TO DRG NO. 172.91.251CBCB Drawing no. 172.91.251CBCB Manufacturing Technology ATTACHED FIRM_UNDERTAKING.pdf INSTRUCTIONS_FOR_VENDOR_QUALIFICATION_CRITERIA_(VQC).pdf UNDERTAKING.pdf VQC_BOX_FOR_UNDER_WATER457.pdf Testing / Inspection Facility ATTACHED	62	196 Number
MOUNTING OF ELECTRICAL COMPONENTS OF CLM TO 6206505016 Physical Verification needed Description MOUNTING OF ELECTRICAL COMPONENTS OF CLM TO DRG NO. 172.74.034CB-3 Specification MOUNTING OF ELECTRICAL COMPONENTS OF CLM TO DRG NO. 172.74.034CB-3 Drawing no. 172.74.034CB-3 Manufacturing Technology ATTACHED FIRM_UNDERTAKING.pdf INSTRUCTIONS_FOR_VENDOR_QUALIFICATION_CRITERIA_(VQC).pdf UNDERTAKING.pdf VQC_MOUNTING_OF_ELECTRICAL_COM458.pdf Testing / Inspection Facility ATTACHED	62	40 Number
HALF RING TO 6201081084 Physical Verification needed Description HALF RING TO DRG NO.188.81.058 Specification HALF RING TO DRG NO.188.81.058 Drawing no. 188.81.058 Manufacturing Technology ATTACHED FIRM_UNDERTAKING.pdf INSTRUCTIONS_FOR_VENDOR_QUALIFICATION_CRITERIA_(VQC).pdf UNDERTAKING.pdf VQC_HALF_RING498.pdf Testing / Inspection Facility ATTACHED	62	58 Number
GRILL ASSEMBLY TO 6206102594 Physical Verification needed Description GRILL ASSEMBLY TO DRG NO.172.02.189CB-1CB Specification GRILL ASSEMBLY TO DRG NO.172.02.189CB-1CB Drawing no. 172.02.189CB-1CB Manufacturing Technology ATTACHED FIRM_UNDERTAKING.pdf INSTRUCTIONS_FOR_VENDOR_QUALIFICATION_CRITERIA_(VQC).pdf UNDERTAKING.pdf VQC_GRILL_SCREEN_ASSEMBLY_.pdf Testing / Inspection Facility ATTACHED	62	541 Number

327

2019000129

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity
FABRICATION OF PONCHO GLACIER Description FABRICATION OF PONCHO GLACIER SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-IND/TC/4674(b) WITH AMENDMENT NO.-3. Specification FABRICATION OF PONCHO GLACIER SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-IND/TC/4674(b) WITH AMENDMENT NO.-3. Drawing no. Manufacturing Technology as per attached manufacturing technology files FABRICATION.pdf Testing / Inspection Facility as per attached testing/inspection facility files	21	22261 Whole job
Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo Description Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo S/2594/CCD Army Logo/TC-15 & Approved sample Specification Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo S/2594/CCD Army Logo/TC-15 & Approved sample Drawing no. Manufacturing Technology as per attached Manufacturing Technology Files Fabrication_Items.pdf Testing / Inspection Facility as per attached Testing / Inspection Facility Files	21	25000 Whole job
Thermal Bonded Batting Polyester 100 GSM 150 cm width Description Thermal Bonded Batting Polyester 100 GSM 150cm width Specification:- THERMAL BONDED BATTING POLYESTER 100 gsm 150 WD, AS PER APPENDIX 'B' OF PROV. SPECIFICATION NO. IND/TC/4587(d) OR AS PER APPENDIX 'C' OF PROV SPECIFICATION NO. IND/TC/4180(B) AS PER RELEVANT CLAUSE OF SPECIFICATION. AS PER CQA(T&C) KANPUR QAI NO. CQA/T&C/QAI/99 TC-11 Specification Thermal Bonded Batting Polyester 100 GSM 150cm width Specification:- THERMAL BONDED BATTING POLYESTER 100 gsm 150 WD, AS PER APPENDIX 'B' OF PROV. SPECIFICATION NO. IND/TC/4587(d) OR AS PER APPENDIX 'C' OF PROV SPECIFICATION NO. IND/TC/4180(B) AS PER RELEVANT CLAUSE OF SPECIFICATION. AS PER CQA(T&C) KANPUR QAI NO. CQA/T&C/QAI/99 TC-11 Drawing no. Manufacturing Technology AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES BATTING.pdf Testing / Inspection Facility AS PER ATTACHED TESTING/INSPECTION FACILITY FILES	21	80864 Metre
ASSEMBLED PCB OF GLASS TEMPERATURE REGULATOR PTC 27 6 WITH ALL RUSSIAN COMPONENTS OF TNPO 160 TO DRG NO MCT 3472 Description ASSEMBLED PCB OF GLASS TEMPERATURE REGULATOR PTC-27-6 WITH ALL RUSSIAN COMPONENTS OF TNPO-160, TO DRG.NO. MCT-3472 AND SCHEMATIC CIRCUIT DIAGRAM AS PER DRG. NO. AU5-088.003 33, REST TECHNICAL REQUIREMENTS / SPECIFICATIONS AS PER ENCLOSED ANNEXURE-A Specification ASSEMBLED PCB OF GLASS TEMPERATURE REGULATOR PTC-27-6 WITH ALL RUSSIAN COMPONENTS OF TNPO-160, TO DRG.NO. MCT-3472 AND SCHEMATIC CIRCUIT DIAGRAM AS PER DRG. NO. AU5-088.003 33, REST TECHNICAL REQUIREMENTS / SPECIFICATIONS AS PER ENCLOSED ANNEXURE-A GLASS_TEMP_REGULATOR_FULL_SPECS.pdf Drawing no. DRG.NO. MCT-3472 AND SCHEMATIC CIRCUIT DIAGRAM AS PER DRG. NO. AU5-088.003 33 GTR_SPECS.pdf Manufacturing Technology NA GLASS_TEMP_REGULATOR_FULL_SPECS.pdf Testing / Inspection Facility NA	74	48 Number
SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR Physical Verification needed Description SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR Specification SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR Drawing no. K-4110*5 side_foldable_butt_drg.PDF Manufacturing Technology AS PER DRAWING MACHINING FABRICATION MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE	70	557 Number
BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE Physical Verification needed Description BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE Specification BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE Drawing no. TEND-2570* bullet_guide_drg.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE	70	1649 Number
BAYONET AS PER DRG NO K 9030 STAR WITH FIRMS MATERIAL FOR TAR Physical Verification needed Description BAYONET AS PER DRG NO K 9030 STAR WITH FIRMS MATERIAL FOR TAR Specification BAYONET AS PER DRG NO K 9030 STAR WITH FIRMS MATERIAL FOR TAR BAYONET_DRAWING_PAGE_11_TO_20.pdf BAYONET_DRAWING_PAGE_21_TO_30.pdf Drawing no. K-9030* DRAWING.pdf Manufacturing Technology AS PER DRAWING ATTACHED MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE	70	2407 Number
SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL Physical Verification needed Description SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL Specification SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL Drawing no. K-2067*5 Auto_sear_drg.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE	70	3564 Number
SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE Physical Verification needed Description SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE Specification SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE Drawing no. TEND-2573*3 selector_lever_Drg.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE	70	2596 Number
SUPPLY OF LOWER HAND GUARD BAND AS PER DRG NO K 1204 STAR WITH FIRMS MATERIAL Physical Verification needed Description SUPPLY OF LOWER HAND GUARD BAND AS PER DRG NO K 1204 STAR WITH FIRMS MATERIAL Specification K-1204* Drawing no. K-1204* Drawing.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE	70	1943 Number
SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL Description SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL Specification SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL Drawing no. K-1205 STAR3 Gas_Port_Block_Drg.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE	70	1925 Number
THREAD COTTON WAXED WHITE 200 METERS EACH REEL Physical Verification needed Description THREAD COTTON WAXED WHITE 200 METERS EACH REEL Specification THREAD COTTON WAXED WHITE 200 METERS EACH REEL Thread_cotton.pdf Drawing no. Manufacturing Technology as per item specification Thread_cotton.pdf Testing / Inspection Facility as per item specification	21	2416 Reel
CASE CARRYING AS PER DRG NO CWC 258 42 FOR AMR SIGHT M 1 Physical Verification needed Description CASE CARRYING AS PER DRG.NO.CWC-258/42 FOR AMR SIGHT, M-1 Specification CASE CARRYING AS PER DRG.NO.CWC-258/42 FOR AMR SIGHT, M-1 CWC-258-42.pdf Drawing no. Mct-258-42.pdf Manufacturing Technology As per drawing & item specification CWC-258-42.pdf Testing / Inspection Facility As per drawing & item specification	74	317 Number
ST ROD GR 53 X M 10 TO SPECN TY 14 1 2232 77 IN HOT ROLLED ANNEALED PELLED CONDN WITH SKIN HARDNESS 217 BHN MAX NOTE TE ST SPECIMEN LONGITUDINAL IN HARDENED TEMPERED CONDN 1 UTS 100 KGF MM SQ MIN 2 RELATIVE REDUCTION IN AREA 35 MIN Physical Verification needed Description ST ROD GR 53 X M 10 TO SPECN. TY 14-1-2232-77 IN HOT ROLLED, ANNEALED & PELLED CONDN. WITH SKIN HARDNESS=217 BHN MAX. NOTE:TE ST. SPECIMEN LONGITUDINAL IN HARDENED & TEMPERED CONDN. 1) UTS=100 KGF/MM SQ. (MIN) 2) RELATIVE REDUCTION IN AREA=35% (MIN). 3) IMPACT STRENGTH = 5 KGF/CM SQ. (MIN) SIZE :DIA 32 + .000/-0.10 MM Specification ST ROD GR 53 X M 10 TO SPECN. TY 14-1-2232-77 IN HOT ROLLED, ANNEALED & PELLED CONDN. WITH SKIN HARDNESS=217 BHN MAX. NOTE:TE ST. SPECIMEN LONGITUDINAL IN HARDENED & TEMPERED CONDN. 1) UTS=100 KGF/MM SQ. (MIN) 2) RELATIVE REDUCTION IN AREA=35% (MIN). 3) IMPACT STRENGTH = 5 KGF/CM SQ. (MIN) SIZE :DIA 32 + .000/-0.10 MM Drawing no. Manufacturing Technology AS PER PQ ATTACHED SPCN.pdf Testing / Inspection Facility AS PER QMI ATTACHED	00	570500 Gram
GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A DC 3774 ME DT 28 07 2003 Physical Verification needed Description GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN. IND/ME/951(PROV)GRADE "A" DC 3774-ME DT.28.07.2003. Specification GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN. IND/ME/951(PROV)GRADE "A" DC 3774-ME DT.28.07.2003. Drawing no. Manufacturing Technology AS PER PQ ATTACHED SPECIFICATION.pdf Testing / Inspection Facility AS PER QMI ATTACHED	00	78 Kilogram
STRAP CAT PART NO 14 5420 000222 ITEM NO 2 OF DRG NO 14 243 AND MATERIAL AS PER SPECIFICATION NO IND ENG PROV 1244 Description STRAP CAT PART NO 14 5420 000222 ITEM NO 2 OF DRG NO 14 243 AND MATERIAL AS PER SPECIFICATION NO IND ENG PROV 1244 Specification STRAP CAT PART NO 14 5420 000222 ITEM NO 2 OF DRG NO 14 243 AND MATERIAL AS PER SPECIFICATION NO IND ENG PROV 1244 Drawing no. Manufacturing Technology Details as per Drawing and PQ Criteria Strap_cat_Item_3.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	50 Number
Saddle Strap Trimming Cat Part No 14 5420 000069 Drg No 14 242 Description Saddle Strap Trimming Cat Part No 14 5420 000069 Drg No 14 242 Specification Saddle Strap Trimming Cat Part No 14 5420 000069 Drg No 14 242 Drawing no. Manufacturing Technology Details as per Drawing and PQ Criteria Strap_Item_no_2.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	07 Number
STRAP SADDLE ASSY NYLON COMPLETE Cat Part No 14 5420 000151 to Drg No 14 243 Description STRAP SADDLE ASSY NYLON COMPLETE Cat Part No 14 5420 000151 to Drg No 14 243 Specification STRAP SADDLE ASSY NYLON COMPLETE Cat Part No 14 5420 000151 to Drg No 14 243 Drawing no. Manufacturing Technology Details as per Drawing and PQ Criteria Strap_Item_no_1.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	89 Number
Hose Dunlop Std Dual Purpose Green Heliflex 25mm ID x 10 m Long Item No 1 of Hose Complete With Connector End Drg No EGA 161 A Description Hose Dunlop Std Dual Purpose Green Heliflex 25mm ID x 10 m Long Item No 1 of Hose Complete With Connector End Drg No EGA 161 A Specification Hose Dunlop Std Dual Purpose Green Heliflex 25mm ID x 10 m Long Item No 1 of Hose Complete With Connector End Drg No EGA 161 A Drawing no. Manufacturing Technology Details as per Drawing and PQ Criteria Hose.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	114 Number
HOSE complete with connectors end 1A to CAT SECTION and CAT PART No 14 5420 000217 and Drg CAT No EGA 161 A and details Description HOSE complete with connectors end 1A to CAT SECTION and CAT PART No 14 5420 000217 and Drg CAT No EGA 161 A and details Specification HOSE complete with connectors end 1A to CAT SECTION and CAT PART No 14 5420 000217 and Drg CAT No EGA 161 A and details Drawing no. Manufacturing Technology Details as per Drawing & PQ Criteria Hose.pdf Testing / Inspection Facility Details as per Drawing & PQ Criteria	00	114 Number
SLINGS ROPE SWR 18 mm dia x 5 M Long to CAT SECTION and CAT PART No E3 3940 000262 Description SLINGS ROPE SWR 18 mm dia x 5 M Long to CAT SECTION and CAT PART No E3 3940 000262 Specification SLINGS ROPE SWR 18 mm dia x 5 M Long to CAT SECTION and CAT PART No E3 3940 000262 Drawing no. Manufacturing Technology Details as per Drawing and PQ Criteria Sling.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	11 Number
SLINGS ROPE SWR 18 mm dia x 3 point 7 M Long to CAT SECTION and CAT PART No E3 3940 000234 Description SLINGS ROPE SWR 18 mm dia x 3 point 7 M Long to CAT SECTION and CAT PART No E3 3940 000234 Specification SLINGS ROPE SWR 18 mm dia x 3 point 7 M Long to CAT SECTION and CAT PART No E3 3940 000234 Drawing no. Manufacturing Technology Details as per Drawing and PQ Criteria Sling.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	06 Number
ANCHOR earth holdfast to CAT SECTION AND CAT PART No LV6 MT 1 30166 to Drg No CIA B 185 1 3 Description ANCHOR earth holdfast to CAT SECTION AND CAT PART No LV6 MT 1 30166 to Drg No CIA B 185 1 3 Specification ANCHOR earth holdfast to CAT SECTION AND CAT PART No LV6 MT 1 30166 to Drg No CIA B 185 1 3 Drawing no. Manufacturing Technology Details as per Drawing and PQ Criteria CIA_(B)-185-1-3(A1)_Anchor_Earth.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	33 Number

328

MPV/Welding Electrode

Vehicle Factory Jabalpur

The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009

Name	Code	Quantity
Air piping modular hose loose kit for MPV consisting of 34 types of pipe as per Drawing No MPV BRAKE 034 MHA Version and drawing No AHSP TSS MPV 002 Description Air piping modular hose loose kit for MPV consisting of 34(28+06) types of pipe as per Drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 Specification Air piping modular hose loose kit for MPV consisting of 34(28+06) types of pipe as per Drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 Scope_of_Work_Trade_assistance.pdf Drawing no. Drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 Drawing.pdf Manufacturing Technology As per specification and drawing Drawing.pdf Testing / Inspection Facility As per specification and drawing	90	11 Set
Trade assistance for laser cutting of 6 MM armour plate at firm details as per annexure A Description Trade assistance for laser cutting of 6MM armour plate at firm details as per annexure- ‘A’. Specification Trade assistance for laser cutting of 6MM armour plate at firm details as per annexure- ‘A’. Drawing no. Manufacturing Technology As per specification Testing / Inspection Facility As per specification	90	21250 Metre
Trade assistance for laser cutting of 4 MM armour plate at firm details as per annexure A Description Trade assistance for laser cutting of 4MM armour plate at firm details as per annexure- ‘A’. Specification Trade assistance for laser cutting of 4MM armour plate at firm details as per annexure- ‘A’. Scope_of_Work_Trade_assistance.pdf Drawing no. Manufacturing Technology As per specification Scope_of_Work_Trade_assistance.pdf Testing / Inspection Facility As per specification	90	3750 Metre
HARDENER HY 880 OR HV 953 IN FOR USE WITH ARALDITE EPOXY RESIN ADHESIVE Description HARDENER HY 880 OR HV 953 IN FOR USE WITH ARALDITE EPOXY RESIN ADHESIVE Specification HARDENER HY 880 OR HV 953 IN FOR USE WITH ARALDITE EPOXY RESIN ADHESIVE Drawing no. Manufacturing Technology Details as per the attached QMI Hardner_QMI.pdf Testing / Inspection Facility Details as per the attached QMI	00	190 Kilogram
ARALDITE PY 880 OR AW 106 STANDARD EPOXY RESIN ADHESIVE Description ARALDITE PY 880 OR AW 106 STANDARD EPOXY RESIN ADHESIVE Specification ARALDITE PY 880 OR AW 106 STANDARD EPOXY RESIN ADHESIVE Drawing no. Manufacturing Technology Details as per the attached QMI ARALDITE_QMI.pdf Testing / Inspection Facility Details as per the attached QMI	00	380 Kilogram
WOODEN STIDE CAT PART No 14 5420 000093 To Drg No ISK 0324 Description WOODEN STIDE CAT PART No 14 5420 000093 To Drg No ISK 0324 Specification WOODEN STIDE CAT PART No 14 5420 000093 To Drg No ISK 0324 Drawing no. Manufacturing Technology Details as per Drawing & PQ Criteria ISK-0324.PDF Testing / Inspection Facility Details as per Drawing & PQ Criteria	00	97 Number
FLANGE ASSEMBLY FOR KM FLOAT Cat Part No 14 5420 000100 to Drg No IMSA 0154 Description FLANGE ASSEMBLY FOR KM FLOAT Cat Part No 14 5420 000100 to Drg No IMSA 0154 Specification FLANGE ASSEMBLY FOR KM FLOAT Cat Part No 14 5420 000100 to Drg No IMSA 0154 Drawing no. IMSA 0154 Manufacturing Technology Details as per Drawing & PQ Criteria IMSA-0154-_A(A3).PDF Testing / Inspection Facility Details as per Drawing & PQ Criteria	00	50 Number
RUBBER HAMMER CAT NO 14 5120 003436 TO DRG NO IM 0218 Description RUBBER HAMMER CAT NO 14 5120 003436 TO DRG NO IM 0218 Specification RUBBER HAMMER CAT NO 14 5120 003436 TO DRG NO IM 0218 Drawing no. IM 0218 Manufacturing Technology Details as per Drawing and PQ Criteria DRG_Rubber_Hammer_-IM0218.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	28 Number
GAUGE FOR COUPLING Cat Part No 14 5120000016 To Drg No 23706 Description GAUGE FOR COUPLING Cat Part No 14 5120000016 To Drg No 23706 Specification GAUGE FOR COUPLING Cat Part No 14 5120000016 To Drg No 23706 Drawing no. 23706 Manufacturing Technology Details as per Drawing and PQ Criteria 84_10_0858_2_37_06_.PDF Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	05 Number
LOCKING LEVER JM LEVER CAT NO 14 5120 002904 TO DRG NO 24219 Description LOCKING LEVER JM LEVER CAT NO 14 5120 002904 TO DRG NO 24219 Specification LOCKING LEVER JM LEVER CAT NO 14 5120 002904 TO DRG NO 24219 Drawing no. 24219 Manufacturing Technology Details as per Drawing and PQ Criteria 84_2_42_19.PDF Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	13 Number
MOVING BOLLARD ASSY Cat Part No 14 5420 000025 To Drg No 24014 A Description MOVING BOLLARD ASSY Cat Part No 14 5420 000025 To Drg No 24014 A Specification MOVING BOLLARD ASSY Cat Part No 14 5420 000025 To Drg No 24014 A Drawing no. 24014 A Manufacturing Technology Details as per Drawing and PQ Criteria 84_10_0858_2_40_14_A.PDF Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	02 Number
SPECIAL WRENCH CAT NO 14 5120 002903 TO DRG NO 24218 Description SPECIAL WRENCH CAT NO 14 5120 002903 TO DRG NO 24218 Specification SPECIAL WRENCH CAT NO 14 5120 002903 TO DRG NO 24218 Drawing no. 24218 Manufacturing Technology Details as per Drawing and PQ Criteria 84_10_0858_2_42_18.PDF Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	16 Number
BAG repair to CAT SECTION AND CAT PART No 14 5420 000092 and Drg CAT No14 246 Description BAG repair to CAT SECTION AND CAT PART No 14 5420 000092 and Drg CAT No14 246 Specification BAG repair to CAT SECTION AND CAT PART No 14 5420 000092 and Drg CAT No14 246 Drawing no. Manufacturing Technology Details as per Drawing and PQ Criteria DRG_BAG_REPAIR_14_246.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	04 Number
PLUG POLYTHENE Cat Part No 14 5420 000162 Drg No ISK 0357 Description PLUG POLYTHENE Cat Part No 14 5420 000162 Drg No ISK 0357 Specification PLUG POLYTHENE Cat Part No 14 5420 000162 Drg No ISK 0357 Drawing no. ISK 0357 Manufacturing Technology Details as per Drawing and PQ Criteria DRG__PLUG_POLYTHENE_ISK-0357.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	20 Number
BAG Plug to CAT SECTION AND CAT PART No 14 5420 000091 and Drg CAT No 14 247 Description BAG Plug to CAT SECTION AND CAT PART No 14 5420 000091 and Drg CAT No 14 247 Specification BAG Plug to CAT SECTION AND CAT PART No 14 5420 000091 and Drg CAT No 14 247 Drawing no. Manufacturing Technology Details as per Drawing and PQ Criteria DRG__PLUG_BAG_14-247.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	56 Number
CAP VALVE Cat Part No 14 5420 000061 to Drg No EPD 4548 C Description CAP VALVE Cat Part No 14 5420 000061 to Drg No EPD 4548 C Specification CAP VALVE Cat Part No 14 5420 000061 to Drg No EPD 4548 C Drawing no. EPD 4548 C Manufacturing Technology Details as per Drawing & PQ Criteria DRG_cap_valve_EPD-4548C.pdf Testing / Inspection Facility Details as per Drawing & PQ Criteria	00	53 Number
WRENCH VALVE Cat Part No 14 5120 002908 to Drg No EPD 4549 B Description WRENCH VALVE Cat Part No 14 5120 002908 to Drg No EPD 4549 B Specification WRENCH VALVE Cat Part No 14 5120 002908 to Drg No EPD 4549 B Drawing no. EPD 4549 B Manufacturing Technology Details as per Drawing and PQ Criteria EPD-4549-B.PDF Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	23 Number
PATCH VALVE Cat Part No 14 5420 000067 ASSY to Drg No IMSA 0156 Description PATCH VALVE Cat Part No 14 5420 000067 ASSY to Drg No IMSA 0156 Specification PATCH VALVE Cat Part No 14 5420 000067 ASSY to Drg No IMSA 0156 Drawing no. Manufacturing Technology Details as per Drawing and PQ Criteria drg__Patch_Valve.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	06 Number
ROLLER LAUNCHING ASSY TO CAT SECTION AND CAT PART NO 14 5420 000160 AND DRG NO S 393 68 Description ROLLER LAUNCHING ASSY TO CAT SECTION AND CAT PART NO 14 5420 000160 AND DRG NO S 393 68 Specification ROLLER LAUNCHING ASSY TO CAT SECTION AND CAT PART NO 14 5420 000160 AND DRG NO S 393 68 Drawing no. Manufacturing Technology Details as per Drawing and PQ Criteria drg__Roller_Launching.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	10 Number
LOCKING LEVER Cat Part No 14 5420 000173 To Drg No DKW 16Z47 Description LOCKING LEVER Cat Part No 14 5420 000173 To Drg No DKW 16Z47 Specification LOCKING LEVER Cat Part No 14 5420 000173 To Drg No DKW 16Z47 Drawing no. DKW 16Z47 Manufacturing Technology Details as per Drawing and PQ Criteria drg__Locking_LeverDKW-16Z47.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	05 Number
Handgrip CAT PART No 14 5420000185 To Drg No CKW 16Z58 Description Handgrip CAT PART No 14 5420000185 To Drg No CKW 16Z58 Specification Handgrip CAT PART No 14 5420000185 To Drg No CKW 16Z58 Drawing no. CKW 16Z58 Manufacturing Technology Details as per Drawing and PQ Criteria DRG__HANDGRIP_CKW-16Z58.pdf Testing / Inspection Facility Details as per Drawing and PQ Criteria	00	08 Number

329

190137 TUNGSTEN POWDER

Heavy Alloys Penetrator Project

Trichy
Trichy
Trichy
Trichy, Tamil Nadu
620025

Name	Code	Quantity	Approx Value	Select
ALUMINIUM ALLOY 7075 T6510 SINGLE EXTRUDED BARS DIA 135 MM Physical Verification needed Description ALUMINIUM ALLOY 7075-T6510, SINGLE EXTRUDED BARS DIA 135.0MM ACCORDING TO ASTM B 221M AS PER HAPP SPECIFICATION NO.HAPP/QA/SPEC/008 Specification As per : MI : No. HAPP/QA/SC/G/002, Issue No. 01, Rev. No. 01 Date of issue : 23/02/2019 TECHNICAL SPECIFICATION: ALUMINIUM ALLOY 7075-T6510 EXTRUDED BARS TO ASTM B 221 M No. HAPP/QA/SPEC/008 Rev.No. 02 Revn. Date : 01-12-05 AL_ALLOY_135_MM_-_MI-SPEC.pdf Drawing no. Manufacturing Technology Manufacturing Technology (attached) FOR_VVRF_-AL_ALLOY_135_MM_-_MANUFACTURING_TECHNOLOGY.pdf Testing / Inspection Facility Testing / Inspection Facility (attached)	01	57080 Kilogram

330

EOI/PROVISIONAL/REGULARIZATION

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity
TRADE ASSISTANCE FOR FABRICATION OF SPIKE OF POLE STANDING Description TRADE ASSISTANCE FOR FABRICATION OF SPIKE OF POLE STANDING Specification SPEC. NO.: IND/GS/1587 Drawing no. Manufacturing Technology AS PER SPECIFICATION ATTACHED TRADE_ASSISTANCE_7.pdf Testing / Inspection Facility AS PER SPECIFICATION ATTACHED	21	AS PER REQUIREMENT Number
TRADE ASSISTANCE FOR FABRICATION OF PIN OF POLE DOOR Description TRADE ASSISTANCE FOR FABRICATION OF PIN OF POLE DOOR Specification SPEC. NO.: IND/GS/1587 Drawing no. Manufacturing Technology AS PER SPECIFICATION ATTACHED TRADE_ASSISTANCE_6.pdf Testing / Inspection Facility AS PER SPECIFICATION ATTACHED	21	AS PER REQUIREMENT Number
TRADE ASSISTANCE FOR FABRICATION OF JOINING PIECE OF POLE DOOR Description TRADE ASSISTANCE FOR FABRICATION OF JOINING PIECE OF POLE DOOR Specification SPEC. NO.: IND/GS/1587 Drawing no. Manufacturing Technology AS PER SPECIFICATION ATTACHED TRADE_ASSISTANCE_5.pdf Testing / Inspection Facility AS PER SPECIFICATION ATTACHED	21	AS PER REQUIREMENT Number
TRADE ASSISTANCE FOR FABRICATION OF SPIKE OF POLE DOOR Description TRADE ASSISTANCE FOR FABRICATION OF SPIKE OF POLE DOOR Specification SPEC. NO.: IND/GS/1587 Drawing no. Manufacturing Technology AS PER SPECIFICATION ATTACHED TRADE_ASSISTANCE_4.pdf Testing / Inspection Facility AS PER SPECIFICATION ATTACHED	21	AS PER REQUIREMENT Number
TRADE ASSISTANCE FOR FABRICATION OF PIN LARGE OF POLE STANDING Description TRADE ASSISTANCE FOR FABRICATION OF PIN LARGE OF POLE STANDING Specification SPEC. NO.: IND/GS/1587 Drawing no. Manufacturing Technology AS PER SPECIFICATION ATTACHED TRADE_ASSISTANCE_3.pdf Testing / Inspection Facility AS PER SPECIFICATION ATTACHED	21	AS PER REQUIREMENT Number
TRADE ASSISTANCE FOR FABRICATION OF PIN SMALL OF POLE STANDING Description TRADE ASSISTANCE FOR FABRICATION OF PIN SMALL OF POLE STANDING Specification SPEC. NO.: IND/GS/1587 Drawing no. Manufacturing Technology AS PER SPECIFICATION ATTACHED TRADE_ASSISTANCE_2.pdf Testing / Inspection Facility AS PER SPECIFICATION ATTACHED	21	AS PER REQUIREMENT Number
TRADE ASSISTANCE FOR FABRICATION OF JOINING PIECE OF POLE STANDING Description TRADE ASSISTANCE FOR FABRICATION OF JOINING PIECE OF POLE STANDING Specification SPEC. NO.: IND/GS/1587 Drawing no. Manufacturing Technology AS PER SPECIFICATION ATTACHED TRADE_ASSISTANCE_1.pdf Testing / Inspection Facility AS PER SPECIFICATION ATTACHED	21	AS PER REQUIREMENT Number
PLATEFORM CARGO AERIAL DEL FOR AN 32 AIRCRAFT1508 x 829 MM COMPLETE Description PLATEFORM CARGO AERIAL DEL FOR AN 32 AIRCRAFT1508 x 829 MM COMPLETE Specification SPECN. NO. IND/GS/1764 (A) ( 7192/PK) Drawing no. Manufacturing Technology AS PER SPECIFICATION AND DRAWING ATTACHED Drawing_for_PCAD_for_AN-32.doc Testing / Inspection Facility AS PER SPECIFICATION AND DRAWING ATTACHED	21	AS PER REQUIREMENT Number
DEMI BANDEROL BEACON BANDEROL SET ASSY B COMPLETE Description DEMI BANDEROL BEACON BANDEROL SET ASSY. "B" COMPLETE Specification DRAWING NO.- IND/GS/568(K) & SUPP. SCH. NO. CQA(GS)SS/411(A) Drawing no. IND/GS/568(K) Manufacturing Technology AS PER SPECIFICATION & DRAWING ATTACHED DEMI_BANDEROL.pdf Testing / Inspection Facility AS PER SPECIFICATION & DRAWING ATTACHED	21	AS PER REQUIREMENT Number
PLATE TO OFAJ DRG NO FS 3098 Physical Verification needed Description PLATE TO OFAJ DRG NO FS 3098 Specification PLATE TO OFAJ DRG NO FS 3098 Drawing no. Manufacturing Technology AS PER PQ ATTACHED SPEN_PQ.pdf Testing / Inspection Facility AS PER QMI ATTACHED	00	700 Number
BLOCK FOR MAIN BODY AS PER DRAWING NO ODD C 1037 FOR PNV MONOCULAR SIGHT Description BLOCK FOR MAIN BODY AS PER DRAWING NO. ODD/C/1037 FOR PNV MONOCULAR SIGHT Specification BLOCK FOR MAIN BODY AS PER DRAWING NO. ODD/C/1037 FOR PNV MONOCULAR SIGHT Drawing no. ODD/C/1037 FOR PNV MONOCULAR SIGHT MONO_BODY_DRG_1037_001.pdf Manufacturing Technology AS PER ANNEXURE Annexure-A.pdf Testing / Inspection Facility AS PER ANNEXURE	74	827 Number
STUD LOCK PIN FASTNERS ECCENTRIC TO DRG MCT 3092 FOR MT TELE 102A Description STUD LOCK PIN FASTNERS ECCENTRIC TO DRG. MCT-3092.FOR MT.TELE.102A Specification STUD LOCK PIN FASTNERS ECCENTRIC TO DRG. MCT-3092.FOR MT.TELE.102A Drawing no. MCT-3092 MCT-3092.pdf Manufacturing Technology Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached) Annexure-A.pdf Testing / Inspection Facility Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019 (Annexure-A Attached)	74	562 Number
ALUMINIUM ALLOY ROUND TO SPECIFICATION EN AW 2011A TB TO SIZE 25MM DIA 0 05 MM IN STRAIGHT LENGHTH OF 2 3 METERS MATERIAL SHALL BE FREE FROM PGG Physical Verification needed Description ALUMINIUM ALLOY ROUND TO SPECIFICATION EN AW-2011A-TB TO SIZE 25MM DIA +/- 0.05 MM IN STRAIGHT LENGHTH OF 2-3 METERS. MATERIAL SHALL BE FREE FROM PGG. Specification ALUMINIUM ALLOY ROUND TO SPECIFICATION EN AW-2011A-TB TO SIZE 25MM DIA +/- 0.05 MM IN STRAIGHT LENGHTH OF 2-3 METERS. MATERIAL SHALL BE FREE FROM PGG. Drawing no. Manufacturing Technology AS PER PQ ATTACHED SPEC_PQ.pdf Testing / Inspection Facility AS PER QMI ATTACHED	00	290100 Gram

Proceed