IS: 2631-1976REV.NO.1 REAFFIRMED 2015. WITH FOLLOWING AMENDMENT.(A) RESIDUE ON EVAPORATION 0.0025 GM./PER 100 ML. MAX.INSTEAD OF 0.OO4 GM./100 ML. MAX.(B)WATER CONTENT 0.1 % MAX. INSTEAD OF 0.5 % MAX.
:-ETHYL ACETATE GRADE I TO SPCN.IS 229-1993 (THIRD REVISION ) REAFFIRMED 2014 WITH INITIALBOILING POINT (IBP) MINIMUM 75.0 DEG. CENTIGRADE ANDDISTILATION RANGE NOT MORE THAN 2.5 DEG. CELSIUS WHICHSHOULD INCLUDE 77.2 DEG. CELSIUS. ( MATERIAL SHOULD BEPACKED IN NEW G.I. DRUMS AS PER I.S. SPECIFICATION )
Specification
:-ETHYL ACETATE GRADE I TO SPCN.IS 229-1993 (THIRD REVISION ) REAFFIRMED 2014 WITH INITIALBOILING POINT (IBP) MINIMUM 75.0 DEG. CENTIGRADE ANDDISTILATION RANGE NOT MORE THAN 2.5 DEG. CELSIUS WHICHSHOULD INCLUDE 77.2 DEG. CELSIUS. ( MATERIAL SHOULD BEPACKED IN NEW G.I. DRUMS AS PER I.S. SPECIFICATION )
SPCN. JSS-6810-129:2015 AND REVISION NO.3,DC NO.5395-ME DT.01.02.2016(1)PRIMARY AMINES O.10% INSTEAD OF 0.20% MAX.(2)SETTING POINT BETWEEN 51.7 DEGREE CELCIUS TO 53 DEGREE CELCIUS INSTEAD OF 51.5 DEGREE CELCIUS TO 53 DEGREE CELCIUS.(3)MOISTURE-MAX. 0.20%.(4)MAT.SHOULD BE IN SMALLCRYSTAL FORM
CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED .
Specification
CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED .
SPECIFICATION-OFI/0023/SPN DT 26/08/1994 "GRADE C" MATERIAL SHAL BE IN POWDER FORM FREE FROM DIRT AND OTHER FOREIGN MATTER AND PACKED IN POLYTHENE LINED H.D.P.E.BAGS OF 50 KG EACH.THE STRENGTH OF LIME AS CALCIUM OXIDE BY MASS SHOULD BE BETWEEN 60 TO 70%.
BLEACHED COTTON LINTER AS PER SPECN. JSS-8305-14:2009(REV.NO.3) DC NO.4062-ME DT.10.03.2010/NC. SPECIAL CLAUSE:VISCOSITY OF THE MATERIAL SHOULD BE BETWEEN 20.30 POISE .
Specification
:-BLEACHED COTTON LINTER AS PER SPECN. JSS-8305-14:2009(REV.NO.3) DC NO.4062-ME DT.10.03.2010/NC. SPECIAL CLAUSE:VISCOSITY OF THE MATERIAL SHOULD BE BETWEEN 20.30 POISE .
METROARK 211COMPOUNDAPPEARANCE- TRANSPARENT WHITE WORKING TEMPERATURE RANGE-(-)40 TO (+)204 DEGREE C EVAPORATION % AT 200 DEGREE C DURING24 HRS-NOT GREATER THAN 2% APPARANT DENSITY(G/CC)0.98+-0.02AS PER DOC.NO.HEMRL/SRP/PHR/RZ-61/IV MAY 2005 REVI-1 COPYNO.2 DATE 15/03/2009 PAGE-79.
Specification
METROARK 211COMPOUNDAPPEARANCE- TRANSPARENT WHITE WORKING TEMPERATURE RANGE-(-)40 TO (+)204 DEGREE C EVAPORATION % AT 200 DEGREE C DURING24 HRS-NOT GREATER THAN 2% APPARANT DENSITY(G/CC)0.98+-0.02AS PER DOC.NO.HEMRL/SRP/PHR/RZ-61/IV MAY 2005 REVI-1 COPYNO.2 DATE 15/03/2009 PAGE-79.
AS PER DRAWING NO. OFI/2001/GMP/65/7/3. 2. LINER FOR RZ-61 FULL SCALE MOTOR AS PER DRAWING NO. OFI/2003/GMP/85 R1 MATERIAL: EPOXY + SILICA FABRIC (COLD CURED). 3. PYRO CARTRIDGE HOLDER FOR SPC(5B-29)AS PER SKETCH NO. 220 OF NAI JABALPUR.
AS PER HEMRL DRAWING NO.HEMRL/SRP/AK/BST/10.1, DET NO. 2& DOC NO.HEMRL/SRP/AK/BST/10.1 DET NO.1 AS PER TECHNICAL SPECIFICATIONS ANDQUALITY DOCUMENT FOR COMPOSITE BOOSTER PROPELLANT NO.R2
Specification
AS PER HEMRL DRAWING NO.HEMRL/SRP/AK/BST/10.1, DET NO. 2& DOC NO.HEMRL/SRP/AK/BST/10.1 DET NO.1 AS PER TECHNICAL SPECIFICATIONS ANDQUALITY DOCUMENT FOR COMPOSITE BOOSTER PROPELLANT NO.R2
TO HEMRL SPECIFICATION NO.ERDL/TRIM/PROP/RM/8. HEMRL/SRP/PIN/MQAP/4 COPY NO.2 REV. NO. 3 DATED 07.09.2012 AND AMENDMENT AS PER HEMRL LETTER NO. HEMRL/SRP/PIN/PROD/NS/54 DT. 26.09.2013
Specification
TO HEMRL SPECIFICATION NO.ERDL/TRIM/PROP/RM/8. HEMRL/SRP/PIN/MQAP/4 COPY NO.2 REV. NO. 3 DATED 07.09.2012 AND AMENDMENT AS PER HEMRL LETTER NO. HEMRL/SRP/PIN/PROD/NS/54 DT. 26.09.2013
HYDROXY TERMINATED POLYBUTADINEAS PER DOCUMENT NO.HEMRL/TRIM/PROP/RM/4{REVISED} DATE OF REVISION : 09/01/2013 DATE OF ISSUE :10/01/13 COPY NO-1 ANDDOC.NO.HEMRL/SRP/PIN/MQAP/6, COPY NO. 2 REV. NO.6 DATED :20/05/2015
Specification
HYDROXY TERMINATED POLYBUTADINEAS PER DOCUMENT NO.HEMRL/TRIM/PROP/RM/4{REVISED} DATE OF REVISION : 09/01/2013 DATE OF ISSUE :10/01/13 COPY NO-1 ANDDOC.NO.HEMRL/SRP/PIN/MQAP/6, COPY NO. 2 REV. NO.6 DATED :20/05/2015
TO SPECN.ERDL/TRIM/PROP/RM/3. AS PER HEMRAL/SRP/PIN/MQAP/4 COPY NO.2 REV.NO.3 DATED 07.09.2012. AND AMENDMENT AS PER HEMRL LETTER NO.HEMRL/SRP/PROD/NS/54 DTD.26.09.2013.
Specification
TO SPECN.ERDL/TRIM/PROP/RM/3. AS PER HEMRAL/SRP/PIN/MQAP/4 COPY NO.2 REV.NO.3 DATED 07.09.2012. AND AMENDMENT AS PER HEMRL LETTER NO.HEMRL/SRP/PROD/NS/54 DTD.26.09.2013.
CARD BOARD DISCS TO DRG.NO 6388106MADE FROM BOARD GLAZED CALANDERED AMMN. 2 MM TO 2.20 MM THICK TO SPECH. JSS-8135-13:2014 REVI-3 DC NO.5257-ME DATED 18/06/2014 (1) MASS= 2250 PLUS-MINUS 225 GM/SQ.MTR. (2) ASH ON INCINERATION AT 800 DEG.CENTIGRADE PLUS-MINUS 25 DEG.CENTIGRADE (MAX) 5.00 PERCENT.
Specification
CARD BOARD DISCS TO DRG.NO 6388106MADE FROM BOARD GLAZED CALANDERED AMMN. 2 MM TO 2.20 MM THICK TO SPECH. JSS-8135-13:2014 REVI-3 DC NO.5257-ME DATED 18/06/2014 (1) MASS= 2250 PLUS-MINUS 225 GM/SQ.MTR. (2) ASH ON INCINERATION AT 800 DEG.CENTIGRADE PLUS-MINUS 25 DEG.CENTIGRADE (MAX) 5.00 PERCENT.
