4881
RFI/OTE/ATJ0130276/2019
Rifle Factory Ishapur
The General Manager,
Ishapore
Ishapore
West Bengal
743144
Name
Code
Quantity
Approx Value
Select
FORGING OF PISTON EXTENSION FOR RIFLE 5 56MM INSAS THROUGH CONVERSION ROUTE
Description
FORGING OF PISTON EXTENSION AS PER RFI SK.NO.6422*2-S FOR RIFLE 5.56MM INSAS THROUGH CONVERSION ROUTE.
Specification
FORGING OF PISTON EXTENSION AS PER RFI SK.NO.6422*2-S FOR RIFLE 5.56MM INSAS THROUGH CONVERSION ROUTE.
Drawing no.
AS PER RFI SK.NO.6422*2-S
Testing / Inspection Facility
70
1814
Number
4882
RFI/OTE/ATJ0120272/2019
Rifle Factory Ishapur
The General Manager,
Ishapore
Ishapore
West Bengal
743144
Name
Code
Quantity
Approx Value
Select
TRIGGER FORGING FOR INSAS
Description
TRIGGER FORGING AS PER RFISK.NO.7057*-S FOR RIFLE 5.56MM INSAS
Specification
TRIGGER FORGING AS PER RFISK.NO.7057*-S FOR RIFLE 5.56MM INSAS
Drawing no.
RFISK.NO.7057*-S
Testing / Inspection Facility
70
1595
Number
4883
3193000816
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Steel Blank of Cylinder Gas
Description
Steel Blank of Cylinder Gas to Drg. No. SKM-889*
Specification
Steel Blank of Cylinder Gas to Drg. No. SKM-889*
Testing / Inspection Facility
Chemical & Mechanical Properties as per std. given drawing
Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
01
148
Number
4884
ORDFYS/OCFAV/18-19/PV/03/042ADV1920
Ordnance Clothing Factory Avadi
The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
FABRICATION OF OVERALL DRILL MP
Description
FABRICATION OF OVERALL DRILL MP.
SWO PART II No. 60238.
Specification
FABRICATION OF OVERALL DRILL MP.
SWO PART II No. 60238.
SPECIFICATION:
1) DIMENSION: AS PER SPECN. NO. IND/TC/4403(L) & SCH. NO. CQA(T&C)/TC-15/8(d)
2) BASIC MATERIAL: CLOTH DRILL COTTON DARK GREY AS PER V.NO. 3 OF IS:177
3) MAKE AND SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) DRAWING AND SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
Testing / Inspection Facility
21
32318
Number
4885
3193000617
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Steel blank of Receiver plate Left and Right FOR MAG
Description
ST. BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG. SKM-960* WITH FIRM'S MAT. THE PROFILE & REF HOLES (SHOULDER LOCKING HOLE DIA 13 .39 (+_0.02) & BUSH MOUNTING FRONT HOLE DIA 18.025 (+_0.02) TO BE DONE SIMULT IN BOTH PLATES KEPT TOGETHER ONE ABOVE AND THER & NO. TO MAKE SET DRG. SKM 884*2 & SKM-884/1*3
Specification
AS PER DRG.
Testing / Inspection Facility
01
54
Set
4886
3193000817
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Steel blank of Receiver plate Left and Right FOR MAG
Description
ST. BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG. SKM-960* WITH FIRM'S MAT. THE PROFILE & REF HOLES (SHOULDER LOCKING HOLE DIA 13 .39 (+_0.02) & BUSH MOUNTING FRONT HOLE DIA 18.025 (+_0.02) TO BE DONE SIMULT IN BOTH PLATES KEPT TOGETHER ONE ABOVE AND THER & NO. TO MAKE SET DRG. SKM 884*2 & SKM-884/1*3
Specification
AS PER DRG.
Testing / Inspection Facility
01
54
Set
4887
128MMETT19001819
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
UPPER HAND GUARD ASSY AS PER DRG NO K 2050 ALT STR 2 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
Description
UPPER HAND GUARD ASSY AS PER DRG NO K 2050 ALT STR 2 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
Specification
UPPER HAND GUARD ASSY AS PER DRG NO K 2050 ALT STR 2 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
Drawing no.
K 2050 ALT STR 2
Testing / Inspection Facility
INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE
70
1787
Number
4888
HAPP/TE/190047
Heavy Alloys Penetrator Project
Trichy
Trichy
Trichy
Trichy, Tamil Nadu
620025
Name
Code
Quantity
Approx Value
Select
Cobalt Powder
Description
Cobalt Powder as Per CQAM 58 Specification
Specification
As per enclosed Monitoring Instructions No: HAPP/QA/SC/G/026, Issue No. 01, Rev. No.04, Date of Issue 04.07.2019 (Annexure A).
Testing / Inspection Facility
99
193
Kilogram
4889
OLF/MM-2/T-1906010216/2019
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
9927093105 SHIELDING BRAID
Description
9927093105 SHIELDING BRAID (PML)- 2X4 SHIELDING BRAID TYPE-PML- 2X 4 AS PER SPECIFICATION NO;OLF/AL /SHIELD/01/MOD
Specification
9927093105 SHIELDING BRAID (PML)- 2X4 SHIELDING BRAID TYPE-PML- 2X 4 AS PER SPECIFICATION NO;OLF/AL /SHIELD/01/MOD
Testing / Inspection Facility
99
320
Metre
9001121786 A SET OF WIRES CONSISTING OF
Description
9001121786 A SET OF WIRES CONSISTING OF A SET OF WIRES CONS.OF A) PTFE INSU.SILVER PLATED COPPER CON DT. SIZE AWG 24/7/32 TYPE ET,
250VAC GRADE, WHITE/RED/BLACK B)PTFE INSU. SILVER PLATED CO PPER CONDU. SIZE AWG26/7/34 TY PE E, 600VAC C) PTFE INSU. SIL. PLA. COP. CONDT. WG26/7
/34 TYPE E, 600VAC, 2 CR.TWISTED & OVERALL PTFE J C OD 2.5MM
Specification
9001121786 A SET OF WIRES CONSISTING OF A SET OF WIRES CONS.OF A) PTFE INSU.SILVER PLATED COPPER CON DT. SIZE AWG 24/7/32 TYPE ET,
250VAC GRADE, WHITE/RED/BLACK B)PTFE INSU. SILVER PLATED CO PPER CONDU. SIZE AWG26/7/34 TY PE E, 600VAC C) PTFE INSU. SIL. PLA. COP. CONDT. WG26/7
/34 TYPE E, 600VAC, 2 CR.TWISTED & OVERALL PTFE J C OD 2.5MM
Testing / Inspection Facility
90
67
Set
9001121633 SHRINKABLE SLEEVE
Description
9001121633 SHRINKABLE SLEEVE 8.0 X 0.5 MM SHRINKABLE SLEEVE 8.0 X 0.5 MM AS PER SPECN. NO. OLF/A-I/HSS/CTI-T-72
Specification
9001121633 SHRINKABLE SLEEVE 8.0 X 0.5 MM SHRINKABLE SLEEVE 8.0 X 0.5 MM AS PER SPECN. NO. OLF/A-I/HSS/CTI-T-72
Testing / Inspection Facility
90
34
Metre
9001121337 SHRINKABLE SLEEVE
Description
9001121337 SHRINKABLE SLEEVE 6 X 0.5 MM HEAT SHRINKABLE SLEEVE 6 X 0.5 MM AS PER SPECN. NO. OLF/A-1/HSS/CTI/T-72/14
Specification
9001121337 SHRINKABLE SLEEVE 6 X 0.5 MM HEAT SHRINKABLE SLEEVE 6 X 0.5 MM AS PER SPECN. NO. OLF/A-1/HSS/CTI/T-72/14
Testing / Inspection Facility
90
38
Metre
9001121336 SHRINKABLE SLEEVE
Description
9001121336 SHRINKABLE SLEEVE 1 X 0.2 MM HEAT SHRINKABLE SLEEVE 1 X 0. 2 MM AS PER SPECN. NO. OLF/A-1/HSS/CTI/T-72/14
Specification
9001121336 SHRINKABLE SLEEVE 1 X 0.2 MM HEAT SHRINKABLE SLEEVE 1 X 0. 2 MM AS PER SPECN. NO. OLF/A-1/HSS/CTI/T-72/14
Testing / Inspection Facility
90
20
Metre
9001121335 HEAT SHRINKABLE SLEEVE
Description
9001121335 HEAT SHRINKABLE SLEEVE 2 X 0.2 SLEEVE (HEAT SHRINKABLE SLEEVE )-NOMINAL SIZE-2 X 0.2 MM AS PER SPECN. NO. OLF/A-1/HSS /CTI/T-72/14
Specification
9001121335 HEAT SHRINKABLE SLEEVE 2 X 0.2 SLEEVE (HEAT SHRINKABLE SLEEVE )-NOMINAL SIZE-2 X 0.2 MM AS PER SPECN. NO. OLF/A-1/HSS /CTI/T-72/14
Testing / Inspection Facility
90
37
Metre
9001120436 SLEEVE
Description
9001120436 SLEEVE(HEAT SHRINKABLE)-6X0.25 SLEEVE (HEAT SHRINKABLE SLEEVE )-NOMINAL SIZE-6X0.25 MM AS PER SPECN. NO: OLF/AII/AL/1 1/HSS ATTACHED
Specification
9001120436 SLEEVE(HEAT SHRINKABLE)-6X0.25 SLEEVE (HEAT SHRINKABLE SLEEVE )-NOMINAL SIZE-6X0.25 MM AS PER SPECN. NO: OLF/AII/AL/1 1/HSS ATTACHED
Testing / Inspection Facility
90
345
Metre
7441120819 WIRE
Description
MGTF-0.35MM Drg No.TU16.505.185-71 WIRE MGTF-0.35MM AS PER SPECN. NO.TU16.505.185-71
Specification
MGTF-0.35MM Drg No.TU16.505.185-71 WIRE MGTF-0.35MM AS PER SPECN. NO.TU16.505.185-71
Testing / Inspection Facility
74
414
Metre
4890
3193000814
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
St Sheet 1 X1250X2500MM
Description
St. Sheet 1.00X1250X2500MM DD quality. (cold rolled) to specification IS:513-(latest issue).
Specification
St. Sheet 1.00X1250X2500MM DD quality. (cold rolled) to specification IS:513-(latest issue).
Testing / Inspection Facility
01
68409
Kilogram
4891
110190233
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
TAPE NYL.27MM BS 150 KG U/D
Description
SPECN-AS PER PARTICULARS.
WIDTH : 26.5+-0.5 MM, THICKNESS :0.42MM(MAX)
WEIGHT/METER :5.2 GM(MAX)
BREAKING STRENGTH :150 KG(MIN)
HEAT SETTING :PROPER HEAT SETTING IS REQUIRED
WEAVE :2X2 BROKEN TWILL(2 ENDS WORKING AS ONE)
TOTAL NO.OF ENDS :228
PICKS/CM :24
DENIER OF YARN :(a)ENDS:153,(b)PICKS :150
T.P.M.(RANGE) :(a)WARP:140-215,,(b)WEFT :165-215
EXTENSION AT BREAK :20-30%
Specification
SPECN-AS PER PARTICULARS.
WIDTH : 26.5+-0.5 MM, THICKNESS :0.42MM(MAX)
WEIGHT/METER :5.2 GM(MAX)
BREAKING STRENGTH :150 KG(MIN)
HEAT SETTING :PROPER HEAT SETTING IS REQUIRED
WEAVE :2X2 BROKEN TWILL(2 ENDS WORKING AS ONE)
TOTAL NO.OF ENDS :228
PICKS/CM :24
DENIER OF YARN :(a)ENDS:153,(b)PICKS :150
T.P.M.(RANGE) :(a)WARP:140-215,,(b)WEFT :165-215
EXTENSION AT BREAK :20-30%
Testing / Inspection Facility
2101221272
12354
Metre
4892
LMMT/2019/01
Vehicle Factory Jabalpur
The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009
Name
Code
Quantity
Approx Value
Select
LPTA Dust Cover Pinion
Description
Dust Cover Pinion
Specification
Dust Cover Pinion
Testing / Inspection Facility
90
250
Number
LPTA Oil Seal
Description
Oil Seal (IPL - AGB/84) Drg No 2574 2820 7802
Specification
Oil Seal (IPL - AGB/84) Drg No 2574 2820 7802
Drawing no.
2574 2820 7802
Testing / Inspection Facility
90
500
Number
LPTA Oil Seal Rear
Description
AGB Rear Oil Seal 2574 2820 7803 NR (IPL-AGB/61)
Specification
AGB Rear Oil Seal 2574 2820 7803 NR (IPL-AGB/61)
Drawing no.
2574 2820 7803
Testing / Inspection Facility
90
250
Number
LPTA Coller Nuts Hex Bolt M35x1 5
Description
Coller Nut / Hex Nut M35x1.5
Specification
Coller Nut / Hex Nut M35x1.5
Drawing no.
327 3530 272 A1
Testing / Inspection Facility
90
250
Number
LPTA Diff Spider 24 Dia
Description
Dif Spider 24 Dia
Specification
Dif Spider 24 Dia
Testing / Inspection Facility
90
250
Number
LPTA Hex Bolt M 14x1x30
Description
Hex Bolt M 14x1x30
Specification
Hex Bolt M 14x1x30
Testing / Inspection Facility
90
250
Number
LPTA Taper Roller Bearings 31309
Description
Taper Roller Bearing (31309)
Specification
Taper Roller Bearing (31309)
Drawing no.
2604 3530 3102
Testing / Inspection Facility
90
250
Number
LPTA Dust Cover Press Fit
Description
Dust Cover (Press Fit) Part No 2732 3530 8201 b
Specification
Dust Cover (Press Fit) Part No 2732 3530 8201 b
Drawing no.
2732 3530 8201
Testing / Inspection Facility
90
250
Number
LPTA Assy Tie Rod
Description
Assy Tie Rod Part No X 261433800103
Specification
Assy Tie Rod Part No X 261433800103
Drawing no.
X 2614 3380 0103
Testing / Inspection Facility
90
250
Number
LPTA Cyl Roller Bearings JC8005
Description
Cyl. Roller Bearing (JC 8005)
Specification
Cyl. Roller Bearing (JC 8005)
Drawing no.
2604 3530 3104
Testing / Inspection Facility
90
250
Number
LPTA Cyl Roller Bearings NU307
Description
Cyl. Roller Bearing 2573 3530 3102 ABC NU307ENW with ST-Cage
Specification
Cyl. Roller Bearing 2573 3530 3102 ABC NU307ENW with ST-Cage
Drawing no.
2573 3530 3102
Testing / Inspection Facility
90
250
Number
LPTA Taper Roller Bearing 31312L
Description
Taper Roller Bearing (31312L)
Specification
Taper Roller Bearing (31312L)
Drawing no.
2573 3530 3108
Testing / Inspection Facility
90
250
Number
LPTA Taper Roller Bearing 30309
Description
Taper Roller Bearing (30309)
Specification
Taper Roller Bearing (30309)
Drawing no.
2507 2630 3101
Testing / Inspection Facility
90
250
Number
LPTA Taper Roller Bearing 32212
Description
Taper Roller Bearing Timken (32212)
Specification
Taper Roller Bearing Timken (32212)
Testing / Inspection Facility
90
250
Number
LPTA Taper Roller Bearing 30214
Description
Taper Roller Bearing (30214)
Specification
Taper Roller Bearing (30214)
Drawing no.
2060 3310 3001
Testing / Inspection Facility
90
250
Number
LPTA Taper Roller Bearing 32211
Description
Taper Roller Bearing Type (32211)
Specification
Taper Roller Bearing Type (32211)
Drawing no.
2612 3530 3101
Testing / Inspection Facility
90
250
Number
LPTA Taper Roller Bearing 30308
Description
Taper Roller Bearing (30308) (GBS40 Gear Box)
Specification
Taper Roller Bearing (30308) (GBS40 Gear Box)
Drawing no.
2505 2630 3104
Testing / Inspection Facility
90
250
Number
LPTA Forging for 4th Speed Gear on Main Shaft
Description
Forg 4th Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5421 3
Specification
Forg 4th Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5421 3
Testing / Inspection Facility
90
250
Number
LPTA Forging for 2nd Speed Gear on Main Shaft
Description
Forging 2nd Speed Gear Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 0416 3 (R3)
Specification
Forging 2nd Speed Gear Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 0416 3 (R3)
Drawing no.
2691 2620 0416 3 R3
Testing / Inspection Facility
90
250
Number
LPTA Forging For 3rd Speed Gear on Counter Shaft
Description
3rd Speed Counter Shaft (Forging) LPTA-715 Vehilce Part No / Drg No 2691 2630 5424 3
Specification
3rd Speed Counter Shaft (Forging) LPTA-715 Vehilce Part No / Drg No 2691 2630 5424 3
Drawing no.
2691 2630 5424 3
Testing / Inspection Facility
90
250
Number
LPTA Forging for 4th Speed Gear on Counter Shaft
Description
Forging for 4th Speed Gear on Counter Shaft BS-III LPTA 715 Part No / Drg No 2691 2630 5428 3 (R)
Specification
Forging for 4th Speed Gear on Counter Shaft BS-III LPTA 715 Part No / Drg No 2691 2630 5428 3 (R)
Testing / Inspection Facility
90
250
Number
LPTA Forging For 3rd Speed Gear on Main Shaft
Description
Forg 3rd Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5414 3
Specification
Forg 3rd Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5414 3
Drawing no.
2691 2620 5414 3
Testing / Inspection Facility
90
250
Number
LPTA Forging for Rev Idler Gear
Description
Forging for Reverse Idler Gear LPTA 715 BS-III Part No 2691 2635 5407 3 (R1)
Specification
Forging for Reverse Idler Gear LPTA 715 BS-III Part No 2691 2635 5407 3 (R1)
Drawing no.
2691 2635 5407 3 R1
Testing / Inspection Facility
90
250
Number
LPTA Forging for Hub L A Lug Version
Description
Forging for Hub L A (Lug Version) 2574 3345 5102 50
Specification
Forging for Hub L A (Lug Version) 2574 3345 5102 50
Drawing no.
2574 3345 5102 50
Testing / Inspection Facility
90
250
Number
LPTA Forging for Steering Arm BS III
Description
Forging for Steering Arm BS-III, LPTA 715, Part No / Drg No 2154 3385 600 3
Specification
Forging for Steering Arm BS-III, LPTA 715, Part No / Drg No 2154 3385 600 3
Drawing no.
2154 3385 6003 3
Testing / Inspection Facility
90
250
Number
LPTA Forging for King Pin Upper
Description
Foring for King Pin Upper Part No 2574 3325 5102 3 R2
Specification
Foring for King Pin Upper Part No 2574 3325 5102 3 R2
Drawing no.
2574 3325 5102 3 R2
Testing / Inspection Facility
90
250
Number
LPTA Forging for King Pin Lower
Description
Foring for King Pin Lower 340 332 1306 3 (R2)
Specification
Foring for King Pin Lower 340 332 1306 3 (R2)
Drawing no.
340 332 1306 3 R2
Testing / Inspection Facility
90
250
Number
LPTA Forging for Flange Axle Housing
Description
Forging for Flange Axle Housing (Axle Housing) Drg No 2604 3510 5102 3 (R1)
Specification
Forging for Flange Axle Housing (Axle Housing) Drg No 2604 3510 5102 3 (R1)
Drawing no.
2604 3510 5102 3 R1
Testing / Inspection Facility
90
250
Number
LPTA Forging for Follower
Description
Forging for Follower 00322 337 0417 50
Specification
Forging for Follower 00322 337 0417 50
Drawing no.
332 337 0417 50
Testing / Inspection Facility
90
250
Number
LPTA Forging for Steering Lever LH RH
Description
Forging for Steering Lever LH & RH Part No 312 338 1005- 50 Drg No 312 338 1005 50
Specification
Forging for Steering Lever LH & RH Part No 312 338 1005- 50 Drg No 312 338 1005 50
Drawing no.
312 338 1005 50
Testing / Inspection Facility
90
250
Number
LPTA Forging for Gear Rear
Description
Forging for Gear Rear Drg No 322 2820 211 50 (R1)
Specification
Forging for Gear Rear Drg No 322 2820 211 50 (R1)
Drawing no.
322 2820 211 50 R1
Testing / Inspection Facility
90
250
Number
LPTA Forging for Drive Shaft
Description
Forging for Drive Shaft Drg No 322 2820 301 50 ( R1)
Specification
Forging for Drive Shaft Drg No 322 2820 301 50 ( R1)
Drawing no.
322 2820 301 50 R1
Testing / Inspection Facility
90
250
Number
LPTA Forging for Coupling Flange RXL
Description
Forging for Coupling Flange Part No 2730 3530 5001 3
Specification
Forging for Coupling Flange Part No 2730 3530 5001 3
Drawing no.
2730 3530 5001 3
Testing / Inspection Facility
90
250
Number
LPTA Forging for Coupling Flange AGB
Description
Forging for Coupling Flange DRG No 312 262 2045 3 (A)
Specification
Forging for Coupling Flange DRG No 312 262 2045 3 (A)
Drawing no.
312 262 2045 3 (A)
Testing / Inspection Facility
90
250
Number
LPTA Forging for Counter Shaft AGB
Description
Forging for Counter Shaft Drg No 322 2830 102 50
Specification
Forging for Counter Shaft Drg No 322 2830 102 50
Drawing no.
322 2820 0102 50
Testing / Inspection Facility
90
250
Number
4893
2204/OFDR/OTE/ADV.REG1-2019 DT 22.10.2019/2019000453
Ordnance Factory Dehu Road
The General Manager,
Dehu Road
Dehu Road
SELECT count(1) as no_application,FM.name as factory_name
FROM `vendor_master` `VM`
JOIN `adve
412101
Name
Code
Quantity
Approx Value
Select
MILL BOARD TO SPECN JSS
Description
MILL BOARD TO SPECN. JSS-9310-01:2014 (REV. NO.3)DS CAT NO.9 310-000001. DC NO.5290-ME DTD.16/12/14 SIZE : 1 MTR X 1/2MTR X 1.4 MM + 0.0, -0.3MM THICK.
Specification
SPECN. JSS-9310-01:2014 (REV. NO.3)DS CAT NO.9 310-000001. DC NO.5290-ME DTD.16/12/14 SIZE : 1 MTR X 1/2MTR X 1.4 MM + 0.0, -0.3MM THICK.
Testing / Inspection Facility
14
5304
Number
BOARD STRAW TO SPECN
Description
"BOARD - STRAW TO SPECN.NO.JSS-8135-11-2014 (REVISION NO.3, SIZE - 762 X 1016 X 2.5MM "
Specification
"BOARD - STRAW TO SPECN.NO.JSS-8135-11-2014 (REVISION NO.3, SIZE - 762 X 1016 X 2.5MM "
Testing / Inspection Facility
14
24572
Number
4894
0103190105
Heavy Vehicle Factory
The Sr.General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
OPERATION INDICATOR TO 6106102426
Description
175.02.523/PL
Specification
175.02.523/PL
Drawing no.
175.02.523/PL
Testing / Inspection Facility
06
2983
Number
4895
110190232
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
LOCK OCK WITH BUCKLE
Description
LOCK OCK WITH BUCKLE
Specification
ADRDE/1354.
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110069032
136
Number
4896
110190226
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
FEMALE COUPLING FOR CWL
Description
FEMALE COUPLING FOR CWL
Specification
DRG. NO. ADRDE/1344(b)
Drawing no.
DRG. NO. ADRDE/1344(b)
Testing / Inspection Facility
2110075039
52
Number
4897
2204/OFDR/OTE/ADV.REG1-2019 DATED 22.10.2019
Ordnance Factory Dehu Road
The General Manager,
Dehu Road
Dehu Road
SELECT count(1) as no_application,FM.name as factory_name
FROM `vendor_master` `VM`
JOIN `adve
412101
Name
Code
Quantity
Approx Value
Select
PAPER FOR CARTG CASES AMMUNITION IN REELS OF
Description
"PAPER FOR CARTG.CASES AMMUNITION IN REELS OF 387.4MM WIDE 457.2MM X 508 MM DIA IN CRIMSON COLOUR TO SPECN. JSS 8135- 09-2004.(REV NO.2)"
Specification
"PAPER FOR CARTG.CASES AMMUNITION IN REELS OF 387.4MM WIDE 457.2MM X 508 MM DIA IN CRIMSON COLOUR TO SPECN. JSS 8135- 09-2004.(REV NO.2)"
Testing / Inspection Facility
14
24572
Number
PAPER WHITE FINE AMMN SPECN JSS
Description
"PAPER WHITE FINE AMMN. SPECN.: JSS - 9310 - 06 :2016 REV.1 SIZE :508 MM X 762 MM IN S/O 84 TO 92 GSM. D S CAT NO.9310-000 013."
Specification
SPECN.: JSS - 9310 - 06 :2016 REV.1 SIZE :508 MM X 762 MM IN S/O 84 TO 92 GSM. D S CAT NO.9310-000 013."
Testing / Inspection Facility
14
347597
Number
EXPANDED POLYSTYRENE FOAM OF AVERAGE DENSITY 18 TO 25 KGS
Description
"EXPANDED POLYSTYRENE FOAM OF AVERAGE DENSITY 18 TO 25 KGS/M3 SIZE 1 MTR X 0.5 MTR X 25 MM THICK. "
Specification
AVERAGE DENSITY 18 TO 25 KGS/M3 SIZE 1 MTR X 0.5 MTR X 25 MM THICK
Testing / Inspection Facility
10
22845
Number
4898
OLF/M-2/Thermistor/Tele-communication/2019
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
THERMISTOR, TOC-MD-5.75K +-0.7K SPECNNO:AV4681027TY (LF 9001120392)
Description
THERMISTOR, TOC-MD-5.75K +-0.7K SPECNNO:AV4681027TY (LF 9001120392)
Specification
THERMISTOR, TOC-MD-5.75K +-0.7K SPECNNO:AV4681027TY (LF 9001120392)
Testing / Inspection Facility
90
534
Number
THERMISTOR TOC D 9927091329
Description
Drg No.SPECN.NO-AB4.681.025/028TY THERMISTER-TOC-D SPECN. NO-AB4 .681.025/028 TY
Specification
Drg No.SPECN.NO-AB4.681.025/028TY THERMISTER-TOC-D SPECN. NO-AB4 .681.025/028 TY
Testing / Inspection Facility
99
418
Number
ADHESIVE ANAEROBIC
Description
"ADHESIVE ANAEROBIC (LOCTITE-270) DRG.NO.3100-18005 DC 36552-A. DATE - 24-4-99"
Specification
(LOCTITE-270) DRG.NO.3100-18005 DC 36552-A. DATE - 24-4-99"
Testing / Inspection Facility
10
1040.00
Litre
INERT COMPOSITION RD 1096
Description
INERT COMPOSITION RD-1096 TO SPECN. IND/ME/899 (PROV)
Specification
SPECN. IND/ME/899 (PROV)
Testing / Inspection Facility
10
11575.00
Kilogram
PHOTO SENSITIVE SOLUTION SCREEN COAT FOR SCREEN MAKING
Description
PHOTO SENSITIVE SOLUTION/SCREEN COAT FOR SCREEN MAKING.
Testing / Inspection Facility
10
34029
Kilogram
RESIN HYLAK HSR 8111
Description
RESIN HYLAK HSR-8111(HYLAC POLYEST)
Specification
HSR-8111 (HYLAC POLYEST)
Testing / Inspection Facility
10
8097.00
Kilogram
LPTA Forging for Gear Front
Description
Forging for Gear Front Drg No 312 282 2211 50 R1
Specification
Forging for Gear Front Drg No 312 282 2211 50 R1
Testing / Inspection Facility
90
250
Number
LPTA Forging for Drive Shaft Front Axle
Description
Foring for Drive Shaft Front Axle Drg No 322 283 0605 3 R1
Specification
Foring for Drive Shaft Front Axle Drg No 322 283 0605 3 R1
Drawing no.
322 2830 0605 3 R1
Testing / Inspection Facility
90
250
Number
BOARD GLAZED CALENDERED AMMN 787 X 558 X 1.25 MM THICK
Description
JSS 8135-13:1998
Specification
JSS 8135-13:1998
Testing / Inspection Facility
14
18306
Number
Paint Olive Green ISC No. 220
Description
IS : 168 / 1993
Specification
IS : 168 / 1993
Testing / Inspection Facility
10
5000.00
Litre
AMMUNITION PROTECTIVE COMPOSITION NO. 5 ( CASHEW POLYMER ) CEMENT RD 1286 AMMN
Description
JSS-8030-20-1997
Specification
JSS-8030-20-1997
Testing / Inspection Facility
10
1040.00
Kilogram
4899
STLTR/02
Vehicle Factory Jabalpur
The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009