EXPANDED POLYSTYRENE FOAM TYPE 2 SELF EXTINGUISHING TYPEAND BULK/APPARENT DENSITY 15 TO 20 KG PER CUBIC METRE TO SPECN IS:4671-1984(FIRST REVN) SIZE 275 mm X 142 mm X 6 mm.
EXPANDED POLYSTYRENE FOAM TYPE 2 SELF EXTINGUISHING TYPEAND BULK/APPARENT DENSITY 15/20 KG PER CUBIC METRE TO SPECN IS:4671-1984 (FIRST REVISION), SIZE 146 MM X 120 MM X 12 MM.IS:4671-1984 (FIRST REVISION), SIZE 146 MM X 120 MM X 12 MM.
EXPANDED POLYSTYRENE FOAM TYPE 2 SELF EXTINGUISHING TYPE ANDBULK/APPARENT DENSITY 15/20 KG PER CUBIC METRE TO SPECN IS:4671-1984 (FIRST REVISION), SIZE 275 MM X 142 MM X 12 MM.IS:4671-1984 (FIRST REVISION), SIZE 275 MM X 142 MM X 12 MM.
EXPANDED POLYSTYRENE FOAM TYPE 2 SELF EXTINGUISHING TYPE AND BULK/APPARENT DENSITY 15/20 KG PER CUBIC METRE TO SPECN IS:4671-1984 (FIRST REVISION) SIZE 265 MM X 146 MM X 12 MM.IS:4671-1984 (FIRST REVISION) SIZE 265 MM X 146 MM X 12 MM.
PIECE PACKING THERMOCOL TOP SIZE 275 X 145 X 20 MM THICKNESS, AND MIDDLE HOLE 20 MM DIA WITH SIDE CORNER CUT 40 X 25 MM TO DRG NO. CQA(A)/AMN/3464 PART NO. ISV - 2185, DET. 1 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE.
Specification
DRG NO. CQA(A)/AMN/3464 PART NO. ISV - 2185, DET. 1
Drawing no.
DRG NO. CQA(A)/AMN/3464 PART NO. ISV - 2185, DET. 1
PIECE PACKING THEROCOL LEFT AND RIGHT SIZE 153 X 140 X 4 MM THICKNESS TO DRG. NO. CQA(A)/AMN/3464 PART NO. ISV -2188, DET. 5 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE.
Specification
DRG. NO. CQA(A)/AMN/3464 PART NO. ISV -2188, DET. 5
Drawing no.
DRG. NO. CQA(A)/AMN/3464 PART NO. ISV -2188, DET. 5
PIECE PACKING THERMOCOL FRONT AND REAR SIZE 265 X 153 X 4MM THICKNESS TO DRG.NO. CQA(A)/AMN/3464 PART NO. ISV-2189, DET. 6 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE.
PIECE PACKING THERMOCOL BOTTOM AND MIDDLE SIZE 275 X 145 X 10MM THICKNESS AND MIDDLE HOLE 20MM DIA TO DRG. NO. CQA (A)/AMN/3464 PART NO. ISV - 2187, DET. 4 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE
Specification
DRG. NO. CQA (A)/AMN/3464 PART NO. ISV - 2187, DET. 4 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE
Drawing no.
DRG. NO. CQA (A)/AMN/3464 PART NO. ISV - 2187, DET. 4 DC:37181-A AVERAGE DENSITY 15 TO 20 KG/M CUBE
PIECES PACKING SIDE SIZE 255mm LONG X 175mm WIDE X5mm THICK OF THERMOCOLE OR CORRUGATED FIBER BOARD (CORRUGATION RUNNING PARALLEL TO WIDTH 175mm ) & FACING TOWARDS INSIDE THE BOX TO DRG. NO.KF/SK-1834 DT. 16.1.89
PIECES PACKING END SIZE 175 mm LONG X 140 mm WIDE X10 mm THICK OF THERMOCOLE OR CORRUGATED FIBRE BOARD (CORRUGATION ON BOTH SIDES & RUNNING PARALLEL TO LENGTH 175MM)TO DRG.NO. KF/SK 1834 DT.16.01.89
PIECES PACKING TOP AND BOTTOM SIZE 255MM LONG X 130 MM WIDEX 10 MM THICK OF THERMOCOLE OR CORRUGATED FIBRE BOARD CORRUGATION ON BOTH SIDES & RUNNING PARALLEL TO LENGTHCORRUGATION ON BOTH SIDES & RUNNING PARALLEL TO LENGTH
Specification
AS PER SPECN.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
21
13018
Number
36323
AFK/2017/SECOND/0032
Ammunition Factory Khadki
The Sr.General Manager,
Kirkee
Kirkee
Maharastra
411003
PIECE PACKING OF EXPANDED POLYTHENE FOAM OF AVERAGE DENSITY 25 TO 30 KG/M3 IN SETS TO DRG NO ARDE 1930 DC 35965A (1) BOTTOM DET NO 3 PART ISV 1716 LENGTH 224MM -1 NO (2)TOP DET NO 4 PART ISV 1717 LENGTH 224MM 1 NO AND PIECES OF SIZES 174 X 113 X 25MM-2NOS, 274 X174X 15MM-2NOS, 113X 100 X 3MM-1NO
Specification
DRG NO ARDE 1930 DC 35965A (1) BOTTOM DET NO 3 PART ISV 1716 LENGTH 224MM -1 NO (2)TOP DET NO 4 PART ISV 1717 LENGTH 224MM 1 NO AND PIECES OF SIZES 174 X 113 X 25MM-2NOS, 274 X174X 15MM-2NOS, 113X 100 X 3MM-1NO
Drawing no.
DRG NO ARDE 1930 DC 35965A (1) BOTTOM DET NO 3 PART ISV 1716 LENGTH 224MM -1 NO (2)TOP DET NO 4 PART ISV 1717 LENGTH 224MM 1 NO AND PIECES OF SIZES 174 X 113 X 25MM-2NOS, 274 X174X 15MM-2NOS, 113X 100 X 3MM-1NO
SET OF PROFEEL ANTISTATIC PACKING PIECES CONSISTING OF1) PIECE PACKING BOTTOM TO DRG NO.CQA(A)/AMN/3194 DC 37179A 2) PIECE PACKING MIDDLE TO DRG NO.CQA(A)/AMN/3195 DC 37179A2) PIECE PACKING MIDDLE TO DRG NO.CQA(A)/AMN/3195 DC 37179A
SET OF PACKING PIECES POLYETHYLENE FOAM OF AVERAGE DENSITY 30 TO 40 KG / M CUBE OF SIZE A) BOTTOM 460 X 355 X 25 MM TH 1 NO. B) END 300 X 135 X 30 MM TH 2 NOS C) SIDE 360 X 135 X 30 MM TH 2 NOS D) TOP 455 X 350 X 25 MM TH 1 NO . SET OF PACKING PIECES TO BE PACKED & SEALED IN POLYTHENE BAG .
Specification
A) BOTTOM 460 X 355 X 25 MM TH 1 NO. B) END 300 X 135 X 30 MM TH 2 NOS C) SIDE 360 X 135 X 30 MM TH 2 NOS D) TOP 455 X 350 X 25 MM TH
SET OF PACKING PIECES FOR MINE APM 16 A1 CONSISTING OF1)PIECE PACKING BOTTOM AS PER DRG PT.NO.ISV 2168 DC.37305-A DET.1 2)PIECE PACKING TOP AS PER DRG. PT. NO. ISV 2169 DET.2 DET.1 2)PIECE PACKING TOP AS PER DRG. PT. NO. ISV 2169 DET.2 37159-A
SET OF PACKING PIECES (PROFEEL FITMENT) FOR PACKING OF 40MM AMMN FOR MGL/UBGL AS PER MAT SPEC. IND/ME/913 (Prov):2004 TO DRG. No. AFK/SK-585-09 SHT. 1 DT.08.05.2009 & SHT. 2 DT. 22.02.2012
CAMBRIC BAG OF SIZE 6 CM X 3 CM CONTAINING 2 GMS OF SILICA GEL SPECN: [1] SILICA GEL IS 3401-1992 NORMAL TYPE REAFFIRME D. 2003 [2] CAMBRIC IS :5088-1982 REV 1 AMDS-2
Specification
(1) SILICA GEL IS 3401-1992 NORMAL TYPE REAFFIRME D. 2003
(2) CAMBRIC IS :5088-1982 REV 1 AMDS-2
CAMBRIC COTTON 762 MM WIDE(BLEACHED)VARIETY NO.2,SPECN IS:5088-1982(1ST REVISION)WITH AMENDMENT NO 2 EXCEPT (1) MASS PER SQ.MTR WHICH SHOULD BE 58 TO 65 GMS AND (2)(1) MASS PER SQ.MTR WHICH SHOULD BE 58 TO 65 GMS AND (2) NOT EXCEED 0.5% WHEN DETERMINED AS PER SPECN IS- 1967-1961".
Specification
IS:5088-1982(1ST REVISION)WITH AMENDMENT NO 2 EXCEPT (1) MASS PER SQ.MTR WHICH SHOULD BE 58 TO 65 GMS AND (2)(1) MASS PER SQ.MTR WHICH SHOULD BE 58 TO 65 GMS AND (2) NOT EXCEED 0.5% WHEN DETERMINED AS PER SPECN IS- 1967-1961".
DOSUTI SCOURED BLEACHED 91CM WIDE,SL. NO IV OF TABLE 1 SPECN IS 179-1977 [SECOND REVISION] REAFFIRMED 2002 WITH AMENDMENT NO. 1 TO 5.WITH AMENDMENT NO. 1 TO 5.
Specification
IS 179-1977 [SECOND REVISION] REAFFIRMED 2002 WITH AMENDMENT NO. 1 TO 5.WITH AMENDMENT NO. 1 TO 5.
CHAFF PAY LOAD FOR LRCR AS PER THE TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT OF KAVACH ROCKET AND CHAFF PAY LOAD-AI/4141 DT.5.5.10.
Specification
TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT OF KAVACH ROCKET AND CHAFF PAY LOAD-AI/4141 DT.5.5.10
CHAFF PAY LOAD FOR MRCR AS PER THE TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT KAVACH ROCKET AND CHAFF PAY LOAD-AI/4141 DT.5.5.10.
Specification
TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT KAVACH ROCKET AND CHAFF PAY LOAD-AI/4141 DT.5.5.10
CHAFF PAY LOAD FOR SRCR AS PER THE TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT OF KAVACH ROCKET AND CHAFF PAY LOAD -AI/4141 DT.5.5.10.
Specification
AS PER THE TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT OF KAVACH ROCKET AND CHAFF PAY LOAD -AI/4141 DT.5.5.10
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
61
3658
Number
36328
AFK/2017/SECOND/0027
Ammunition Factory Khadki
The Sr.General Manager,
Kirkee
Kirkee
Maharastra
411003
STEEL WIRE, COLD DRAWN, ANNEALED AND PHOSPHATED TO SPECN.JSS 465-01: 1994 CLASS-II, POLISH, RUSTFREE, UTS- 51 TO 61 KGF PER SQMM. DIA 3.86-4.06 MM TO SPECN. BS 970-1983 PT-I, GRADE 080 M 40, IN COIL FORM IN 550 MM DIA, COIL WT. 60-80 KGS. REV. 1 FOR JSS SPECN
BRASS TUBES (SEAMLESS) OD 6MM PLUS MINUS 0.05, ID 5MM PLUS MINUS 0.05 MM OF TWO METER LENGTH TO SPECIFICATION JSS: - 9535-02:2008 REV. 3 AND PHYSICAL PROPERTIES TO SPECN. IS 407-1981, HARDNESS 110-130 VPN APPROX.
Specification
JSS: - 9535-02:2008, PHYSICAL PROPERTIES TO SPECN. IS 407-1981
ELECTROLYTIC TIN PLATE SHEET EQUALLY COATED CODE E 5.6/5.6, SIZE 710 MM X 765 MM X 0.30 MM THICK,TEMPER T 57,CONFORMING TO SPECN IS:1993-2006 (FOURTH REVISION)
ELECTROLYTIC TINPLATE SHEET EQUALLY COATED CODE E 5.6/5.6 SIZE 710 mm X 765 mm X 0.25 mm THICK. TEMPER T 57/T 61 CONFORMING TO SPECN IS:1993-2006 (FOURTH REVISION)
PLYWOOD FOR GENERAL PURPOSE SIZE 120 cm X 120 cm X 8 mm THICK 5 PLY GRADE MR TYPE AB SPECN. IS:303-1989 (THIRD REVISION) WITH AMENDMENT NO.1,2,3,4,5 & 6 REAFFIRMED 2003
Specification
IS:303-1989 (THIRD REVISION) WITH AMENDMENT NO.1,2,3,4,5 & 6 REAFFIRMED 2003
PLYWOOD FOR GENERAL PURPOSE SIZE 120 cm X120 cm X 6 mm THICK5 PLY GRADE-MR ,TYPE-AB SPECN IS:303-1989 ( THIRD REVISION ) WITH AMENDMENT NO.1,2,3,4,5 & 6 Reaffirmed 2003
PLYWOOD FOR GENERAL PURPOSE GRADE MR TYPE AA SIZE 120 cm X 120 cm X 6 mm THICK 5 PLY SPECN IS:303-1989 ( THIRD REVISION ) REAFFIRMED 2003 WITH AMENDMENT NOS. 1,2,3,4 5, & 6
Specification
IS:303-1989 ( THIRD REVISION ) REAFFIRMED 2003 WITH AMENDMENT NOS. 1,2,3,4 5, & 6
PLY WOOD FOR GENERAL PURPOSE,GRADE MR TYPE BB SIZE 120 cm X120 cm X 3 mm THICK, 3 PLY, SPECN IS:303-1989 (3RD REVISION) WITH AMENDMENT NO.1 , 2,3,4,5, & 6.
Specification
PLY WOOD FOR GENERAL PURPOSE,GRADE MR TYPE BB SIZE 120 cm X120 cm X 3 mm THICK, 3 PLY, SPECN IS:303-1989 (3RD REVISION) WITH AMENDMENT NO.1 , 2,3,4,5, & 6.
ONE SET OF BLANK LABELS CONTAINING 3 SPOOLS OF 2300 LABELS EACH, ALONG WITH ONE NO. OF WAX COATED RIBBON OF 360 METER FOR PRINTING IN THERMAL PRINTER FOR CARTG. 0.22" BALL PKG. AS PER SPECN. NO. L3/LABEL & RIBBON/02
PRI-PRINTED EXPLOSIVE LABELS PRESSURE SENSITIVE SELF ADHESIVE AND WATER PROOF WITH PLASTIC BASE TO SPECN. IS-13262: :1992 ( reaffirmed 2003)IS-13262: :1992 ( reaffirmed 2003)
