TO DRG. NO. F-7268389, DC NO. 36977-A DTD. 24-08-2004 &
TO SPECN. :- (I) CIA 4204(b) DC NO. 36977-A DTD. 24-08-2004
(II) JSS : 0465-01-1994 (REVISION NO. 1)
NOTE :- MATERIAL TO BE PACKED AS PER 85 A/L TO DRG. NO. ISV 266 GA WHICH CONSIST OF CWP 14A, CARTON 11 A/L AND CARTON 12A
BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE.
Specification
BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE.
BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE.
BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017
Specification
BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017
BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017
BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG.
Specification
BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG.
BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG.
BAG POLYTHENE FOR PACKING NC- QUALITY OF MATERIAL TO CONFORM TO LOW DENSITY POLYETHYLENE TYPE-1 SPECIFICATION JSS- 9330 - 03-2014,REV.NO.3.THICKNESS 0.18 PLUS MINUS 0.02MM.DIMENSION AND HEAT SEALING AS PER DRG.NO.OFBA/NC/46 AMENDED ON 27.03. 2010.
Specification
BAG POLYTHENE FOR PACKING NC- QUALITY OF MATERIAL TO CONFORM TO LOW DENSITY POLYETHYLENE TYPE-1 SPECIFICATION JSS- 9330 - 03-2014,REV.NO.3.THICKNESS 0.18 PLUS MINUS 0.02MM.DIMENSION AND HEAT SEALING AS PER DRG.NO.OFBA/NC/46 AMENDED ON 27.03. 2010.
AMMONIA ANHYDROUS GRADE-2 TO SPECIFICATION IS/662/1980. REAFFIRMED 2003WITH AMENDMENT 1,2,3&4 WITH THE FOLLOWING REQUIREMENTS 1)PURITY 99.5% MIN(2) OIL CONTENT- 0.002% MAXM. AND OTHER PARAMETERS TO CONFIRM TO IS -662-1980 GR-2 (FIRST REVISION) REAFFIRMED-2003 WITH AMENDMENT 1,2,3&4.
Specification
AMMONIA ANHYDROUS GRADE-2 TO SPECIFICATION IS/662/1980. REAFFIRMED 2003WITH AMENDMENT 1,2,3&4 WITH THE FOLLOWING REQUIREMENTS 1)PURITY 99.5% MIN(2) OIL CONTENT- 0.002% MAXM. AND OTHER PARAMETERS TO CONFIRM TO IS -662-1980 GR-2 (FIRST REVISION) REAFFIRMED-2003 WITH AMENDMENT 1,2,3&4.
ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%.
Specification
ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%..
ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%.
ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.
Specification
ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.
ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.
HDPE Dot coated Printed Fusible Interlining Fabric 150 cm
Specification
1) Raw Material : 100% Cotton
2) Count (Warp & Weft) : 30s
3) Ends per Inch : 76+/- 5
4) Picks per Inch : 76 +/- 5
5) Width : 150 cm (Min)
6) Weave : Plain
7) Coating : HDPE
8) Colour : White
9) GSM : 148 +5/-2.5%
10) Shrinkage % : As per Appendix A of IND/TC/2089(a)
11) Bond Strength (Kgs) : > 2.0 As per IND/TC/2089(a)
12) Packing & Marking : As per CQA(T&C) Kanpur Schedule No. CQA(T&C)/PMS/35(d). Except that :
a. Fabric in roll form shall not be less than 40 Mtrs in running length without stitching/ basting in between.
b. Roll weight shall not exceed 50 kgs.
c. Each roll of fabric shall be wrapped separately with polypropylene plain sheet. final packing of 2 rolls in one W.P Gunny/HDPE sheet.
d. Dimension for paper tubes of fabric roll: Outer Diameter-3.5 cm, Inner Diameter-2.5 cm Thickness-0.5 cm.
e. Fabric selvedges shall be wound evenly at one edge.
13) Sampling plan : As per annexure.
STEEL SHEET 1.00 MM THICK X (1000 X 2500 MM LONG) TO SPECN IS:5986-2002 GD Fe 410 HOT ROLLED & ANNEALED OR IS:2062-19999 GD Fe410WA OR IS 1079-1988 GD ST42
Specification
STEEL SHEET 1.00 MM THICK X (1000 X 2500 MM LONG) TO SPECN IS:5986-2002 GD Fe 410 HOT ROLLED & ANNEALED OR IS:2062-19999 GD Fe410WA OR IS 1079-1988 GD ST42
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
70
47091 KGS
Kilogram
35779
121MMETT17001492
Ordnance Factory Bhandara
The General Manager,
Bhandara
Bhandara
Maharashtra
441906
CUTTING AND STITCHING OF CHARGE BAGS FOR CHARGE 9 OF 155MM AMMN.AS PER DRG.NO-6388103,6388104,6388106,6388115,6388116, 6355588,5191810,5173926,4090246,4090247,4079932. MATERIAL WILL BE SUPPLIED BY OFBA.
Specification
CUTTING AND STITCHING OF CHARGE BAGS FOR CHARGE 9 OF 155MM AMMN.AS PER DRG.NO-6388103,6388104,6388106,6388115,6388116, 6355588,5191810,5173926,4090246,4090247,4079932. MATERIAL WILL BE SUPPLIED BY OFBA.
Drawing no.
CUTTING AND STITCHING OF CHARGE BAGS FOR CHARGE 9 OF 155MM AMMN.AS PER DRG.NO-6388103,6388104,6388106,6388115,6388116, 6355588,5191810,5173926,4090246,4090247,4079932. MATERIAL WILL BE SUPPLIED BY OFBA.
1- Width(mm) --- 25 mm. Appendix B of IS:3846:1984
2- Mass(gm/mt.)---12(max). Appendix C of IS:3846:1984
3- Ends(in full/width)------ 85+4/-0. IS:1963
4- Picks/cm.--- 20+2/-0 (total picks based on two thread working as one) IS:1963
5- Breaking load(20 cm X full width)("KN.") Minimum--2.4 IS:1969
6- Nature of material--100% Polyster. IS:667
7- pH Value(Cold Method)--6 to 8.5. IS:1390
8- % Water soluble matter(max)-- 1%. IS:3456
9- Weave-- 2/2 Twill weave. Visual
Specification
1- Width(mm) --- 25 mm. Appendix B of IS:3846:1984
2- Mass(gm/mt.)---12(max). Appendix C of IS:3846:1984
3- Ends(in full/width)------ 85+4/-0. IS:1963
4- Picks/cm.--- 20+2/-0 (total picks based on two thread working as one) IS:1963
5- Breaking load(20 cm X full width)("KN.") Minimum--2.4 IS:1969
6- Nature of material--100% Polyster. IS:667
7- pH Value(Cold Method)--6 to 8.5. IS:1390
8- % Water soluble matter(max)-- 1%. IS:3456
9- Weave-- 2/2 Twill weave. Visual
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101797674
79224
Metre
35794
17F002FYFO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
PART NO.ISV-529A DC NO:37249-A,DT.08.03.10,SPECN:IA 1169(N),DC NO:35576-A, AIDE MEMOIRE- P/11.NOTE-PAINTING AND PROTECTIVE TREATMENT AS PER DRG.PAINTED "OLIVE GREEN"TO ISC NO.220 OF IS-5-2007(SIXTH REVISION) (AMDT.NO.1)(RE-AFFIRMED 2000)
Specification
PART NO.ISV-529A DC NO:37249-A,DT.08.03.10,SPECN:IA 1169(N),DC NO:35576-A, AIDE MEMOIRE- P/11.NOTE-PAINTING AND PROTECTIVE TREATMENT AS PER DRG.PAINTED "OLIVE GREEN"TO ISC NO.220 OF IS-5-2007(SIXTH REVISION) (AMDT.NO.1)(RE-AFFIRMED 2000)
DRG.NO.CQA(A)AMN/2644 PART NO.ISV-530A,DC:37249-A,DT.08.3.10 SPECN:IA-1169(n),DC NO:35576-A,PAINTED"OLIVE GREEN"ISC NO: 220 OF IS:5-2007(6TH REVISION) RE AFFIRMED-2012.
Specification
DRG.NO.CQA(A)AMN/2644 PART NO.ISV-530A,DC:37249-A,DT.08.3.10 SPECN:IA-1169(n),DC NO:35576-A,PAINTED"OLIVE GREEN"ISC NO: 220 OF IS:5-2007(6TH REVISION) RE AFFIRMED-2012.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
14
14615
Number
35796
2017_DoDP_237444_1
Ordnance Factory Bhandara
The General Manager,
Bhandara
Bhandara
Maharashtra
441906
PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .
Specification
PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .
PZM NOZZLE CASTING CUM MACHINING LEFT & RIGHT AS PER DRG.NO.FOR LEFT NOZZLE PZM ERDL DRG.NO. 1040, DET-1 AMENDED ON DT.11-03-15,FOR RIGHT NOZZLE PZM ERDL DRG.NO.1040 ,DET-2 AMENDED ON DT.11-03-15 AND FOR CASTING NOZZLE PZM ERDL DRG.NO. 1040.
Specification
PZM NOZZLE CASTING CUM MACHINING LEFT & RIGHT AS PER DRG.NO.FOR LEFT NOZZLE PZM ERDL DRG.NO. 1040, DET-1 AMENDED ON DT.11-03-15,FOR RIGHT NOZZLE PZM ERDL DRG.NO.1040 ,DET-2 AMENDED ON DT.11-03-15 AND FOR CASTING NOZZLE PZM ERDL DRG.NO. 1040.
PZM NOZZLE CASTING CUM MACHINING LEFT & RIGHT AS PER DRG.NO.FOR LEFT NOZZLE PZM ERDL DRG.NO. 1040, DET-1 AMENDED ON DT.11-03-15,FOR RIGHT NOZZLE PZM ERDL DRG.NO.1040 ,DET-2 AMENDED ON DT.11-03-15 AND FOR CASTING NOZZLE PZM ERDL DRG.NO. 1040.
20
265
Number
35798
2017_DoDP_237023_1
Ordnance Factory Bhandara
The General Manager,
Bhandara
Bhandara
Maharashtra
441906
PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
Specification
PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
14
10570
Sheet
35799
121MMTT17001449
Ordnance Factory Bhandara
The General Manager,
Bhandara
Bhandara
Maharashtra
441906
LEAD TUBE FOR CLC-4 SPECIFICATIONIS 404 : 1993 (REAFFIRMED 2019), PART-1.GRADE-1 LEAD PURITY:99.8 % (MIN) DIMENTION:ID:240.2 MM. OD:290.2 MM. THICKNESS VERIATION:0.4 MM. LENGHT OF COIL 4 MTR
Specification
LEAD TUBE FOR CLC-4 SPECIFICATIONIS 404 : 1993 (REAFFIRMED 2019), PART-1.GRADE-1 LEAD PURITY:99.8 % (MIN) DIMENTION:ID:240.2 MM. OD:290.2 MM. THICKNESS VERIATION:0.4 MM. LENGHT OF COIL 4 MTR
LEAD TUBE FOR CLC-4 SPECIFICATIONIS 404 : 1993 (REAFFIRMED 2019), PART-1.GRADE-1 LEAD PURITY:99.8 % (MIN) DIMENTION:ID:240.2 MM. OD:290.2 MM. THICKNESS VERIATION:0.4 MM. LENGHT OF COIL 4 MTR
08
96
Number
35802
OPF/ADVANCE VR/EOI/JULY-17/ TAPE-02
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
SPECN. NO IS: 3255-1979 Reaffirmed 2003. Except that:- a) In appearance finish and in other respectes not defined in this Specn.the material shall conform to the sealed pattern held in the custody of The Controller CQAT&C, Kanpur b)There shall be no presence of starch. (c) Scouring Loss Mild Method is to be followed in lieu of severe method & shall not exceed 2%. (d) (i) Ends in full width to be raised by 2.(ii) Picks/cms(-1) Tolerance to be permitted. (e) In addition the firm shall get their name or trade mark woven/stamped alongwith selvedges at a interval of one meter on either side of the tape (d)sampling plan and criteria AsPer QAI NO.CQATIC/TC-8/11(b)
Specification
SPECN. NO IS: 3255-1979 Reaffirmed 2003. Except that:- a) In appearance finish and in other respectes not defined in this Specn.the material shall conform to the sealed pattern held in the custody of The Controller CQAT&C, Kanpur b)There shall be no presence of starch. (c) Scouring Loss Mild Method is to be followed in lieu of severe method & shall not exceed 2%. (d) (i) Ends in full width to be raised by 2.(ii) Picks/cms(-1) Tolerance to be permitted. (e) In addition the firm shall get their name or trade mark woven/stamped alongwith selvedges at a interval of one meter on either side of the tape (d)sampling plan and criteria AsPer QAI NO.CQATIC/TC-8/11(b)
SPECIFICATION NO.: IS: 3255-1979 Except that :- i) In appearance shade finish and in other respects not
defined in this Specn. the material shall conform to the
sealed pattern held in the custody of the Controller,
CQAT&C, KANPUR. (ii) There shall be no presence of starch (iii) Scouring loss mild method is to be followed in lieu of severe method & shall not exceed 2% (Two percent). (iv) Sampling plan as per annexure (B) attached.
Packing and marking as per schedule No.CIT&C/PMS/65.
Specification
SPECIFICATION NO.: IS: 3255-1979 Except that :- i) In appearance shade finish and in other respects not
defined in this Specn. the material shall conform to the
sealed pattern held in the custody of the Controller,
CQAT&C, KANPUR. (ii) There shall be no presence of starch (iii) Scouring loss mild method is to be followed in lieu of severe method & shall not exceed 2% (Two percent). (iv) Sampling plan as per annexure (B) attached.
Packing and marking as per schedule No.CIT&C/PMS/65
IS : 3255-1979 Except that :- (i) In appearance shade,
finish & in all other respect not defined in this IS Specn.
the material shall conform to the sealed pattern held in the
custody of the Controller, CQAT&C, Kanpur. (ii) there shall be no presence of starch. (iii) Scouring loss Mild method is to be followed in lieu of severs method and shall not exceed 2.0% (Two percent).
(iv) 100% Sampling Testing & Inspection will be resorted to Sampling plan as per annexure (a) attached.
Packing and marking as per schedule CIT&C/PMS/65.
Specification
IS : 3255-1979 Except that :- (i) In appearance shade,
finish & in all other respect not defined in this IS Specn.
the material shall conform to the sealed pattern held in the
custody of the Controller, CQAT&C, Kanpur. (ii) there shall be no presence of starch. (iii) Scouring loss Mild method is to be followed in lieu of severs method and shall not exceed 2.0% (Two percent).
(iv) 100% Sampling Testing & Inspection will be resorted to Sampling plan as per annexure (a) attached.
Packing and marking as per schedule CIT&C/PMS/65.
