ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).
Specification
ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 20 KGS MAX).
PAINT READY MIXED, PRIMING, RED OXIDE, ZINC CHROME, AMMUNITION, AIR DRYING, MATT FINISH, BRUSHING/SPRAYING.SPECN J.S.S.-8010-68-1994. DC NO .3470-ME DT.14.1.98 PACKED IN 20 LTRS NON RETURNABLE M.S. DRUMS.
Specification
PAINT READY MIXED, PRIMING, RED OXIDE, ZINC CHROME, AMMUNITION, AIR DRYING, MATT FINISH, BRUSHING/SPRAYING.SPECN J.S.S.-8010-68-1994. DC NO .3470-ME DT.14.1.98 PACKED IN 20 LTRS NON RETURNABLE M.S. DRUMS.
PAINT PFU, FINISHING, AIR-DRYING, SPRAYING, MATT FINISH, TO SPECN: IS-168-1993(3RD REV.)(AS APPLICABLE FOR DEFENCE USE) IN OLIVE GREEN COLOUR AS PER IS: 5-1994 ( FOURTH REVISION ) AMENDMENT No.1,ISC-220.
Specification
PAINT PFU, FINISHING, AIR-DRYING, SPRAYING, MATT FINISH, TO SPECN: IS-168-1993(3RD REV.)(AS APPLICABLE FOR DEFENCE USE) IN OLIVE GREEN COLOUR AS PER IS: 5-1994 ( FOURTH REVISION ) AMENDMENT No.1,ISC-220.
HANDLE FOR STEEL BOX G-70 AS PER MSF Drg.No.VA/137,TO BE MADE FROM MILD STEEL ROD TO SPECIFICATION IS:280/1978 QUARTER HARD MATERIAL TO BE TESTED TO SPECIFICATION BEFORE FORMATION OF HANDLES AS PER THE DRAWING.
Specification
HANDLE FOR STEEL BOX G-70 AS PER MSF Drg.No.VA/137,TO BE MADE FROM MILD STEEL ROD TO SPECIFICATION IS:280/1978 QUARTER HARD MATERIAL TO BE TESTED TO SPECIFICATION BEFORE FORMATION OF HANDLES AS PER THE DRAWING.
STRENGTHENING PLATE AS PER CQA ( A ) DRG NO:DD (L) 9722 ITEM NO.4,REQUIRED FOR BOX G-70 TO CQA DRG.NO. SV.68 A;MADE FROM COLD-ROLLED & ANNEALED STEEL TO SPECN.IS:513/1994 GRADE-"D" OTHER DETAILS AS PER ATTACH SHEETS.
Specification
STRENGTHENING PLATE AS PER CQA ( A ) DRG NO:DD (L) 9722 ITEM NO.4,REQUIRED FOR BOX G-70 TO CQA DRG.NO. SV.68 A;MADE FROM COLD-ROLLED & ANNEALED STEEL TO SPECN.IS:513/1994 GRADE-"D" OTHER DETAILS AS PER ATTACH SHEETS.
COLD ROLLED STEEL SHEET 1 MM THICK X 20-1/8" X 9-3/16" ALUMINIUM KILLED IN ANNEALED AND BEST SURFACE-CONDITION TO SPECN.IS:513/1994 GR.-DD ( DEEP DRAWN QUALITY ).
Specification
SURFACE-CONDITION TO SPECN.IS:513/1994 GR.-DD ( DEEP DRAWN QUALITY ).
SIDE PLATE EMBOSSED & TRIMMED AS PER MSF DRG.NO.VA-141/A REQUIRED FOR BOX G-70.DIMENSION/SIZE OF THE STORE SHOULD BE AS PER MSF DRG.NO.VA-141/A.MATERIAL SPECIFICATION - IS : 513 -1994 GRADE "D" COLD-ROLLED AND ANNEALED WITH BEST SURFACE FINISH.
Specification
SIDE PLATE EMBOSSED & TRIMMED AS PER MSF DRG.NO.VA-141/A REQUIRED FOR BOX G-70.DIMENSION/SIZE OF THE STORE SHOULD BE AS PER MSF DRG.NO.VA-141/A.MATERIAL SPECIFICATION - IS : 513 -1994 GRADE "D" COLD-ROLLED AND ANNEALED WITH BEST SURFACE FINISH.
BODY PLATE EMBOSSED & TRIMMED AS PER MSF DRG.NO.VA-140/A REQUIRED FOR BOX G-70.MATERIAL SPECIFICATION OF THE STORE-IS :513/1994 GRADE "D" COLD-ROLLED AND ANNEALED.DIMENSION/SIZE SHOULD BE AS PER MSF DRG.NO.VA-140/A
Specification
BODY PLATE EMBOSSED & TRIMMED AS PER MSF DRG.NO.VA-140/A REQUIRED FOR BOX G-70.MATERIAL SPECIFICATION OF THE STORE-IS :513/1994 GRADE "D" COLD-ROLLED AND ANNEALED.DIMENSION/SIZE SHOULD BE AS PER MSF DRG.NO.VA-140/A
Drawing no.
VA-140/A
Manufacturing Technology
Testing / Inspection Facility
01
20408
Number
34087
110170349
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
S/5432/PW/TC-19(a),Min Width 142 cms required to be water repellant & should conform to standard / values laid down in R/O the bundesmann test as mentioned in Clause 6.1(q) of above specification. Testing of % composition of Wool & polyester should be done as per IS: 2006-1988 2nd Revision Amendment No.1 & the method of Calculation to be based on dry mass basis only as per Clause 9.4.1 of specification.
Specification
S/5432/PW/TC-19(a),Min Width 142 cms required to be water repellant & should conform to standard / values laid down in R/O the bundesmann test as mentioned in Clause 6.1(q) of above specification. Testing of % composition of Wool & polyester should be done as per IS: 2006-1988 2nd Revision Amendment No.1 & the method of Calculation to be based on dry mass basis only as per Clause 9.4.1 of specification.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
21
455026
Metre
34108
20170387PV/0802/EOT/F
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
Specification
HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
SPECN-AS PER PARTICULARS.
(a) MASS/MET. :33 GM(MAX)
(b)BREAKING STRENGTH(BOTHWAYS) :38 KGF(MIN)TESTING METHOD OF
B.S.IS:1969-1968
(c)TEARING STRENGTH(BOTHWAYS) :1.7KGF(MIN)
TESTING METHOD OF TEARING STRENGTH IS:4726-1964 APP.'D'.
(d)AIRPOROSITY:16-22CV.FT/SQ.FT/SEC. (e)THICKNESS:0.07MM(MAX) AT PRESSURE 200GM/SQCM
(f)WIDTH: 100 CM.
(g)WEAVE :PLAIN
(h)YARN LINEAR DENSITY BOTHWAYS:30 DENIER(NOMINAL)
(i)TWIST OF YARN :WARP:200TPM, WEFT:SPIN(10-30 TPM)
(j)THREAD DENSITY BOTHWAYS :44-45 PER CM.
THERE SHOULD NOT BE ANY YARN DISTORTION/SLIPPAGE IN FABRIC
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
2101221267
42629
Metre
34123
110170339
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Hot Rolled Steel Rod 90MM(+/-1) Dia to Specn.IS:5517-1978, 35 MN6 MO3 RS100 MN to be Heat Treated to Achieve Hardness 210 to 260 VPN in Finished Condition
Specification
Hot Rolled Steel Rod 90MM(+/-1) Dia to Specn.IS:5517-1978, 35 MN6 MO3 RS100 MN to be Heat Treated to Achieve Hardness 210 to 260 VPN in Finished Condition
