BASE DRG.NO.4-025998,081, DC-36956A, MATERIAL:PHENOLIC PLASTIC CN 1-342-02,SPECN.JSS 9330-05:2002 WITH REQT. OF TENSILE STRENGTH NOT LESS THAN-350 KG/SQ.CM OR PHENOLIC PLASTIC TO GRADE SP-27 OF M/S IPL BOMBAY IS PERMITTED.

SPECN. NO. JSS 9330-05

DRG.NO.4-025998,081,

METALLIC FIN RETAINING CAP TO DRG. NO. NAD-8501 (PROV) DATED 07-04-1986 FOR ROCKET 68 MM HE/PRACTICE.

METALLIC FIN RETAINING CAP TO DRG. NO. NAD-8501 (PROV) DATED 07-04-1986 FOR ROCKET 68 MM HE/PRACTICE.

DRG. NO. NAD-8501 (PROV) DATED 07-04-1986

FIRE TRANSMITTING TUBE TO DRAWING PART NO.IRW 115,DC 37103-A DTD.02.04.2007 FOR 81MM AMMUNITION

FIRE TRANSMITTING TUBE TO DRAWING PART NO.IRW 115,DC 37103-A DTD.02.04.2007 FOR 81MM AMMUNITION

DRAWING PART NO. IRW 115

LENS TO DRAWING NUMBER 4-025998, DETAIL NUMBER 065, DC 36956-A DT.16-4-04. MATERIAL: PHENOLIC PLASTIC CN1-342-02 GOST.5689-79 OR INDIAN EQUIVALENT APPROVED BY CQA(ME), M/S IPL, BOMBAY GR. SP-27 OR MOULDING POWDER/MOULDING PLASTIC (PHENOLIC) TO SPECN. JSS 9330-05.

SPECN. NO. JSS 9330-05

DRAWING NUMBER 4-025998, DETAIL NUMBER 065,

TUBE DELAY (FOR 4 SECONDS) DRG.PT.NO. IQX-943,DC-37296-A DT.27.12.2011

TUBE DELAY (FOR 4 SECONDS) DRG.PT.NO. IQX-943,DC-37296-A DT.27.12.2011

DRG.PT.NO. IQX-943

FOIL TIN/LEAD, SIZE: 63 PLUS MINUS 1 MM WIDE X 0.05 MM THICK TO SPECN. JSS 9535-06: 2010 (REV. NO. 2) DC 4085-ME,IN ROLL FORM AND COIL LENGTH 3 TO 5 KG/REEL

SPECN. NO. JSS 9535-06

LINER TO DRG.NO. HEMRL/MISC/SK/ NO/ 1438 DET.NO. 5

LINER TO DRG.NO. HEMRL/MISC/SK/ NO/ 1438 DET.NO. 5

DRG.NO. HEMRL/MISC/SK/NO/1438 DET.NO. 5

ADDITIVE LINER FOR FULL CHARGE 130 MM DRG.PT.NO.IRW-162 DC-35659-A, SPECN.NO.CQA(A) 0303(D) DCI 33783-A

SPECN. NO. CQA (A) 0303

DRG.PT.NO.IRW-162

LINER TO DRG.NO. HEMRL/MISC/SK/NO/ 1437 DET.NO.5

LINER TO DRG.NO. HEMRL/MISC/SK/NO/ 1437 DET.NO.5

DRG.NO. HEMRL/MISC/SK/NO/1437 DET.NO.5

LEATHER WASHER LUBRICATED, DIA 59.69 MM, DESIGNER REF.CIA(A)-177.

LEATHER WASHER LUBRICATED, DIA 59.69 MM, DESIGNER REF.CIA(A)-177.

DESIGNER REF. CIA(A) -177.

SPACER FOR 155 MM ERFB (BB) DES.REF. 02676-20003A203 DC NO.37128-A DT.03/08/2007

SPACER FOR 155 MM ERFB (BB) DES.REF. 02676-20003A203 DC NO.37128-A DT.03/08/2007

DES. REF. 02676-20003A203

STRUCTURAL ADHESIVE(SA-6)TO SPECIFICATION NO.DMS/SA-6/2002

SPECN NO. DMS/SA-6/2002

PROPRIETARY ITEM

"O" RING, INTERNAL DIA. 124.5 X 3 SECTION NITRILE WITH SHORE HARDNESS PS (72-78), DOWTY 200-158-4470, OR INDIGENOUS EQUIVALENT MATERIAL- ACRYLONITRILE BUTADINE RUBBER TO SPECN. NO. IND/ME/914(PROV) GRADE"D" HARDNESS 72-78 FOR 155 MM HE ERFB AMMN.

SPECN. NO. IND/ME/914

SEAL TO DRAWING NUMBER 6390 155 DC-35565-A. SPECIFICATION IS-5872-1990

SPECN NO. IS-5872-1990

DRAWING NUMBER 6390 155

TRANSISTOR - 2T326B, AS PER SPECIFICATIONS NO. SHYTO.336.003 TU

TRANSISTOR - 2T326B, AS PER SPECIFICATIONS NO. SHYTO.336.003 TU

TRANSISTOR 2T3117A/PK AS PER SPECN. NO. AEYAR.432140.247 TU

TRANSISTOR 2T3117A/PK AS PER SPECN. NO. AEYAR.432140.247 TU

TRANSISTOR 2T3117A AS PER SPECN. NO. AEYAR.432140.247 TY

TRANSISTOR 2T3117A AS PER SPECN. NO. AEYAR.432140.247 TY

TRANSISTOR 2T208E AS PER SPECN. NO. SHE3365007TU

TRANSISTOR 2T208E AS PER SPECN. NO. SHE3365007TU

TAPE COTTON MEDIUM,PROOFED, SIZE 25 MM WIDE + - 2.5 MM,SPECN NO.IND/ME /888 (PROV) DC NO.3754- ME

SPECN NO.IND/ME/888

TAPE, WEBBING COTTON, PROOFED AND DYED OLIVE GREEN, SIZE : 25 MM +/- 1.6 MM WIDE X 1.0 MM +/- 0.1 MM THICK, SPECIFICATION NO.JSS 8305-18:2006 (REV.NO.2) DC NO.3946-ME DT.04.04.2009.NOTE: - BREAKING LOAD 120 KG.MINIMUM AS PER SPECIAL REQUIREMENT

SPECN NO. JSS 8305-18

CLOTH SILK, UNDYED, UNPROOFED, SIZE: 1320 MM TO 1370 MM WIDE TO SPECN. JSS 8305 -22: 2006 (REVISION NO.2) DC NO.4010-ME DT.08.01.2010.

SPECN. NO. JSS 8305 -22

DUNLOP ADHESIVE S-758 (IN 5 LITRES PACKING)

DUNLOP ADHESIVE S-758 (IN 5 LITRES PACKING)

RDL 939 (POLYSULPHIDE SEALANT)

RDL 939 (POLYSULPHIDE SEALANT)

AMMONIUM SULPHATE (SPL. GRADE) TO SPECIFICATION NO.JSS 6810-64:2006,DC-4026-ME DT.08.01.2010, REV. NO. 2.

SPECN NO. JSS 6810-64

WAX MICROCRYSTALLINE AMMUNITION O.N.G.C TYPE SPECIFICATION NUMBER: IND/ME/868(A) (PROV) DC 3762-ME.

SPECN NO. IND/ME/868

ACETONE TO SPECIFICATION NO.IS:170-1986(THIRD REVISION) REAFFIRMED-2001.

SPECN NO.IS:170-1986

BARYTES,TYPE-2 TO SPECIFICATION NO.JSS-6810-51:2007(REVISION NO.2), DC-4037-ME DT.08.01.2010 (AN INGREDIENT OF H.E. SUBSTITUTE).

SPECN NO. JSS-6810-51

ZIRCONIUM METAL POWDER 5-7 MICRON PROCESSED FROM ZIRCONIUM SPONGE SEMI REACTOR GR.II.SPECIFICATION NO.IS-12437:1988

SPECN NO. IS-12437:1988

• 1. PULVERISERS 2. LEACHING TANK 3. FURNANCE 4. VACCUM PUMP

• 1. MATERIAL TESTING AT NABL LABORATORY AS PER GOVERNING SPECIFICATION/REQUIREMENTS. 2. IN CASE OF SOLE SELLING AGENTS/DEALERS/STOCKIEST FIRM NEED NOT SUBMIT MANUFACTURING, TECHNOLOGY/INSPECTION TECHNOLOGY BUT SHOULD HABE OEM CERTIFICATE FOR THIS ITEM.

MINERAL JELLY [DROP POINT 60 DEGREE CENTIGRADE (MAXIMUM)] SPECN.NO.JSS 8030-09 :2010 (REV. NO.2) DC NO. 5011-ME DT.14/02/2011.

SPECN. NO.JSS 8030-09

LACQUER: CLEAR NITROCELLULOSE (APC NO. 217) SPECN.NO. JSS 8010-42 :2009 (REV. NO. 3) DC NO. 3977-ME DT.24.09.2009.

SPECN.NO. JSS 8010-42

PARAFFIN LIQUID,GRADE 1 TO SPECIFICATION NO.JSS-9160-05:2001 REVISION NO.1,DC NO.3702-ME DT.10/10/2001

SPECN NO. JSS-9160-05

ANIMAL GLUE (IN POWDER FORM) FOR GENERAL WOOD WORKING PURPOSE SPECN NO.IS-852:1994(SECOND REVISION) WITH SPECIAL REQUIREMENT OF CHLORIDE CONTENT SHALL NOT EXCEED 1%.

SPECN NO. IS-852:1994

PHOSPHATING CHEMCIAL, MAKE : HENKEL CHEMBOND, GRADE KEMKOTE 312

PHOSPHATING CHEMCIAL, MAKE : HENKEL CHEMBOND, GRADE KEMKOTE 312

ABSOLUTE ALCOHOL SPECIAL GRADE-1 TO SPECN.IS-321-1964 (ETHYL ALCOHOL SPECIAL GRADE)

SPECN. NO. IS-321-1964

LEAD ACETATE (NORMAL) FOR MANUFACTURE OF INITIATORS TO SPCN. JSS-6810-123:2008 (REVISION NO.2) DC-3962-ME DT.24-05-2009. (GLAXO, RANKEM,SD FINE, OR E-MERCK MAKE ONLY)

SPCN. NO. JSS-6810-123

APC NO.225 (30% SHELLAC VARNISH)TO SPECIFICATION NO.JSS-8010-63:2004 (REV.NO.2) DC-3841-ME DT.04/04/2005

SPECN. NO. JSS-8010-63

WAX SHELLAC AMMUNITION TO SPECN. IND/ME/164 (B) DC-3754-ME

SPECN. NO. IND/ME/164

PARAFFIN WAX, SPECIAL TO SPECN. JSS 9160-06:2002 (REV.NO.2) DC 3768-ME DT.17-06-03

SPECN. NO. JSS 9160-06

PACKING BOX FOR HDC-2 TO DRG NO. HEMRL/MISC/SK-1471 SHT.2 OF 2 AND DET.1 TO 12 EXCLUDING SADDLE

PACKING BOX FOR HDC-2 TO DRG NO. HEMRL/MISC/SK-1471 SHT.2 OF 2 AND DET.1 TO 12 EXCLUDING SADDLE

DRG NO. HEMRL/MISC/SK-1471 SHT.2 OF 2 AND DET.1 TO 12 EXCLUDING SADDLE

PACKING BOX FOR HDC-1 TO DRG.NO.HEMRL/MISC/SK-1470 SHT.2 OF2 & DET 1 TO 12 (EXCLUDING SADDLE TO DRG.NO. HEMRL SK 1169 DET 12)

PACKING BOX FOR HDC-1 TO DRG.NO.HEMRL/MISC/SK-1470 SHT.2 OF2 & DET 1 TO 12 (EXCLUDING SADDLE TO DRG.NO. HEMRL SK 1169 DET 12)

DRG.NO.HEMRL/MISC/SK-1470 SHT.2 OF 2 & DET 1 TO 12 (EXCLUDING SADDLE TO DRG.NO. HEMRL SK 1169 DET 12)

• Timber &Plywood processing unit (Cutting, Finishing, polishing, Painting) o Pressure impregnation pant for preservative treatment (as per Specification lA 948)

• a) Jolt Test b) Drop Test c) Stacking test d) Preservative penetration test e) Dimensional checking facility

UNIT LOAD ( M.O.P. 12) FOR SHELL 155MM (B/B) ON PALLET DESIGNER'S REFERENCE 155-2000 (M) DC-37126-A DT.25.07.2007

UNIT LOAD ( M.O.P. 12) FOR SHELL 155MM (B/B) ON PALLET DESIGNER'S REFERENCE 155-2000 (M) DC-37126-A DT.25.07.2007

DESIGNER'S REFERENCE 155-2000 (M)

UNIT LOAD (M.O.P. 12) FOR SHELL 155 MM B/T ON PALLET. DESIGNER'S REFERENCE 155-1000(M) DC NO.37126-A DT.25/7/2007

UNIT LOAD (M.O.P. 12) FOR SHELL 155 MM B/T ON PALLET. DESIGNER'S REFERENCE 155-1000(M) DC NO.37126-A DT.25/7/2007

DESIGNER'S REFERENCE 155-1000(M)

PAPER LAMINATED GRADE III, SIZE:914 MM WIDE X 0.65 TO O.73 MM THICK IN ROLLS TO SPECN. IND/ME/786(D):2013 DC NO.5261-ME (WEIGHT OF EACH BUNDLE TO BE RESTRICTED LESS THAN OR EQUAL TO 250 KGS ONLY)

SPECN. NO. IND/ME/786

PAPER, WRAPPING, WAXED KRAFT AMMUNITION TO SPECN. JSS-8135-05: 2006(REV.NO.3) DC NO.4008-ME DT.08.01.2010, SIZE-112 CM WIDE X 183 MET. IN ROLLS.

SPECN. NO. JSS-8135-05

PAPER NATURAL BROWN COLOUR OF 685.5MM WIDTH IN ROLLS 780 MM EXTERNAL DIA AND 100 MM INTERNAL DIA. FOR CARTRIDGE CASES AMMUNITION TO SPECN. NO. JSS 8135-09:2004 (REVISION NO.2) (REAFFIRMED 2011) DC NO. 5065-ME DT.10-01-2012.

SPECN. NO. JSS 8135-09

PAPER LAMINATED GR -III, SIZE- 102 MM WIDE X 0.65 TO O.73 MM THICK IN ROLL TO SPECN. IND/ME/786(C) DC 3754-ME DT.12.12.02

SPECN. NO. IND/ME/786

PAPER KRAFT AMMUNITION TO SPECN. JSS 8135-017:2002 DC 3731-ME, SIZE 482 MM X 635 MM SUBSTANCE 125 +/- 5 GSM

SPECN. NO. JSS 8135-017

PAPER LAMINATED GR.III,SIZE 127 MM WIDE X 0.65 MM TO 0.73 MM THICK IN ROLLS TO SPECN.IND/ME/786(D):2013 DC NO. 5261-ME DT.24/6/2014.

SPECN NO. IND/ME/786(D):2013

AMMUNITION CONTAINER 63A DRG.PT.NO.ISV 506-A DC NO.36166-A

AMMUNITION CONTAINER 63A DRG.PT.NO.ISV 506-A DC NO.36166-A

DRG.PT.NO ISV 506-A

CONTAINER 39 A/L, DRG.PT.NO.ISV 414-A DC NO. 36411-A, SPECN. CQA(A) 2805 (H) DC NO.36145-A.

SPECN. NO. CQA(A) 2805

DRG.PT.NO ISV 414-A

CABLE NO. 53 ADSH4853013 FOR PNK-4S

CABLE NO. 53 ADSH4853013 FOR PNK-4S

AMMN CONTAINER 47B.DES.REF. CIA/AMN/2483, PT.NO.ISV-515A DC-36647-A,CONSISTING OF (1) BODY TO PT.NO.ISV 1769 2)LID PT.NO.ISV 1770 (3) RING PT.NO.ISV 1771 (4) DISC DIA 28 X 7.5 + - 0.5 THICK CAPCELL.

AMMN CONTAINER 47B.DES.REF. CIA/AMN/2483, PT.NO.ISV-515A DC-36647-A,CONSISTING OF (1) BODY TO PT.NO.ISV 1769 2)LID PT.NO.ISV 1770 (3) RING PT.NO.ISV 1771 (4) DISC DIA 28 X 7.5 + - 0.5 THICK CAPCELL.

DES. REF. CIA/AMN/2483, PT. NO. ISV-515A

CARRIER AMMUNITION 10 C TO DRAWING PART NO.ISV 495-A DC 35523-A TO SPECN.NO.CQA(A) 2804(M) DC 36202-A DT.07/11/96

SPECN.NO. CQA(A) 2804

DRAWING PART NO.ISV 495-A

BEARING S/ROW SKF-6204 20X47X14MM

BEARING S/ROW SKF-6204 20X47X14MM

CYLINDRICAL ROLLER BEARING

CYLINDRICAL ROLLER BEARING

SET OF ANGULAR CONTACT BALL BEARING

SET OF ANGULAR CONTACT BALL BEARING

YOKE TYPE BEARING NUTR 50

YOKE TYPE BEARING NUTR 50

YOKE TYPE BEARING NUTR 35A

YOKE TYPE BEARING NUTR 35A

YOKE TYPE BEARING

YOKE TYPE BEARING

BEARING S/ROW-6308 S:40X90X23MM

BEARING S/ROW-6308 S:40X90X23MM

BEARING S/R SKF-6309 S-45X100X25MM

BEARING S/R SKF-6309 S-45X100X25MM

BEARING S/R D/G SKF-6311 S-55X120X2

BEARING S/R D/G SKF-6311 S-55X120X2

BEARING NO. NK 15/16A

BEARING NO. NK 15/16A

BEARING LS-11

BEARING LS-11

BEARING DOUBLE ROW SELF ALIGN BALL

BEARING DOUBLE ROW SELF ALIGN BALL

ANGULAR CONTACT BEARING-70 BNR 10

ANGULAR CONTACT BEARING-70 BNR 10

ANGULAR CONTACT BEARING-65 BNR 10

ANGULAR CONTACT BEARING-65 BNR 10

Wheel Rear Sight DRG No. 0204 03 02 00 01 002 00DD for JVPC 5.56MM (MIM Route)

Wheel Rear Sight DRG No. 0204 03 02 00 01 002 00DD for JVPC 5.56MM (MIM Route)

DRG No. 0204 03 02 00 01 002 00DD

• MIM

• 1-Chemical & Mechanical properties as per std.given drawing
• 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

REAR SIGHT DRG NO. 0204 03 02 00 01 005 00DD FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 02 00 01 005 00DD FOR JVPC 5.56MM (MIM ROUTE)

HOUSING PLUNGER DRG.NO. 0204 03 02 18 29 004 00DD FOR JVPC 5.56MM (MIM ROUTE)

DRG.NO. 0204 03 02 18 29 004 00DD FOR JVPC 5.56MM

SPECN: IND/GS/1887.

SPECN: IND/GS/1887.

COTTON CANVAS 545 GR. O.G. 91.4 CM UNPROOFED VARIETY NO.3

SPCN. IS:1424-1970.

AS PER SPECIFICATION

DRAWING NO. ADRDE/282(b)

RIP CORD LARGE ADRDE/115(f)

PROV DRAWING NO.ADRDE/115(f).

IND/ENG/PROV/1221/a

IND/ENG/PROV/1221/a

SPRING TO DRG NO 172 47 116 1

SPRING TO DRG NO 172 47 116 1

DRG NO 172 47 116 1

DRIVING BAND BLANK DRG. NO. SK-7894/A

DRIVING BAND BLANK DRG. NO. SK-7894/A

DRG. NO. SK-7894/A

GLASS SLAB S52-1S

GLASS SLAB S52-1S SIZE:150*150 *20 WEIGHT PER SLAB =1.8 KG. OTHER CHARACTERISTICS AS PER OST-11-PO-735.002-73 & SPECN. NO. OLF/OPT.GLASS/SPEC/03-2 RE FRACTIVE INDEX OF GLASS=1.4821

GLASS SLAB TF-110

RADIATION RASISTANT GLASS TF-110, REFRA.INDEX(ND.)=1.806274 ABBE VALUE (VD.)=25.37 , SLAB SIZE 240 TO 360 X 160 TO 250 X 30 TO 75 MM , ALL OTHER CHARACTERISTICS AS PER SPECIFICATION OLF/OPT-GLS/SPEC/03-2 . DENSITY OF GLASS 5.19 GRM/CC.SIZE BEYOND THE GIVEN RANGE WILL NOT BE ACCEPTED.

GLASS SLAB TF-105

GLASS SLAB TF-105 SIZE:MULTIPL E OF 50 X MULTIPLE OF 50 MM X MULTIPLE OF 35 MM,MAXIMUM SLAB SIZE = 350 X 300 X 70 MM, RADIATION RESISTANT GLASS, REF RACTIVE INDEX ND = 1.755234, ABBE VALUE VD = 27.53, DENSITY OF GLASS = 4.77 GM/CC. OTHER CHARACTERISTICS AS PER SPECN N O. OLF/OPT-GLS/SPEC/03-2.