MIL Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: [email protected] with a copy to the OFB mail id : [email protected]

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

26081

ORDFYS/OFBA/14/7/2018

Ordnance Factory Bhandara

The General Manager,
Bhandara
Bhandara
Maharashtra
441906

Name	Code	Quantity
BOX C 18A STEEL Description BOX C 18A STEEL Specification SPEC. AMMUNITION CONTAINER BOX, C-18 A/L/(STEEL), FOR AMMUNITION CONT. ASSY .28, TO DRG NO. ISV 282-A, DC- 35479-A Drawing no. SPEC. AMMUNITION CONTAINER BOX, C-18 A/L/(STEEL), FOR AMMUNITION CONT. ASSY .28, TO DRG NO. ISV 282-A, DC- 35479-A Manufacturing Technology Testing / Inspection Facility	42	5100.00 Number
BOX C 26 A SER Description WOOD FOR PACKAGE AMMUNITION, 92 A PART NO. ISV-352A, DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A Specification WOOD FOR PACKAGE AMMUNITION, 92 A PART NO. ISV-352A, DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A Drawing no. DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A 05)ISV-3524_Model_(1).pdf Manufacturing Technology MSME box_c_26A.PDF Testing / Inspection Facility BOX C-26A, WOOD FOR PACKAGE AMMUNITION, 92A PART NO. ISV-352A DRG-CIA/AMMN/1773 DC-35922-A DTD.23.02.95 & SPECIFICATION IA-948 (a,f) DC - 36081 A.	65	6107.580 Number
BOLT OF SIZE M 16 X 2P X 50 MM Description BOLT OF SIZE M 16 X 2P X 50 MM Specification TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5 Drawing no. TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. Manufacturing Technology Testing / Inspection Facility	42	6499.995 Number
BLEACHED COTTON LINTERS Description BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE. Specification BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE. Drawing no. Manufacturing Technology MSME JSS_8305-14_2020_(REVISION_NO_5).pdf Testing / Inspection Facility BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE.	21	469868.520 Kilogram
BLANKET COTTON DOSUTI WHITE STICHED AROUND SIZE 1 5 X 0 8 Description BLANKET COTTON DOSUTI WHITE STITCHED AROUND OF SIZE- 1.5 X 0.8 METER. AS PER SPECIFICATION NO- IS:179-2009 (THIRD REVISION) REAFIRMED-2018. Specification BLANKET COTTON DOSUTI WHITE STITCHED AROUND OF SIZE- 1.5 X 0.8 METER. AS PER SPECIFICATION NO- IS:179-2009 (THIRD REVISION) REAFIRMED-2018. Drawing no. Manufacturing Technology MSME 2101068528_IS-179_TEXTILES_COTTON_DOSUTI.pdf Testing / Inspection Facility BLANKET COTTON DOSUTI WHITE STITCHED AROUND OF SIZE- 1.5 X 0.8 METER. AS PER SPECIFICATION NO- IS:179-2009 (THIRD REVISION) REAFIRMED-2018.	21	24281.835 Number
BELLOID T.D.(AS PER ENCL SPECN) Description BELLOID T.D. is a Sodium Salt of Condensation Product of Nophthalene Sulphonic acid with Formaldehyde and also called Anionic dispersing agent. Specification BELLOID T.D. is a Sodium Salt of Condensation Product of Nophthalene Sulphonic acid with Formaldehyde and also called Anionic dispersing agent. Drawing no. BAG_REEL_CLOTH_PDF.pdf Manufacturing Technology Testing / Inspection Facility	10	4.320 Kilogram
Basic Lead Stearate Description JSS 6810 -145:2017( Revision No 2) Specification JSS 6810 -145:2017( Revision No 2) Drawing no. Manufacturing Technology MSME JSS_6810-145-2017_(Second_Revision)_BASIC_LEAD_STEARATE.pdf Testing / Inspection Facility JSS 6810 -145:2017( Revision No 2)	10	3015.945 Kilogram
Mono Basic Lead Salicylate Description ERDL/DBP/PS 133(a)Sheet No.19 of Sept.1986 Specification ERDL/DBP/PS 133(a)Sheet No.19 of Sept.1986 Drawing no. Manufacturing Technology Testing / Inspection Facility	10	4428.457 Kilogram
BARRELS 200 LITRES Description BARRELS 200 LITRES CAPACITY WITH LID (EMPTY DRUMS M.S ) DRG NO, OFBA/NC/189 ATTACHED Specification BARRELS 200 LITRES CAPACITY WITH LID (EMPTY DRUMS M.S ) DRG NO, OFBA/NC/189 ATTACHED Drawing no. DRG NO, OFBA/NC/189 Manufacturing Technology MSME OFBA_NC_189.jpg Testing / Inspection Facility BARRELS 200 LITRES CAPACITY WITH LID (EMPTY DRUMS M.S ) DRG NO, OFBA/NC/189 ATTACHED	14	3450.000 Number
BAG MADE OF REEL CLOTH Description BAG MADE OF REEL CLOTH AS PER DRG NO.OFBA/NCP/EXPN/17 Specification BAG MADE OF REEL CLOTH AS PER DRG NO.OFBA/NCP/EXPN/17 Drawing no. DRG NO.OFBA/NCP/EXPN/17 Manufacturing Technology MSME OFBA_NCP(EXPN)_17.jpg Testing / Inspection Facility BAG MADE OF REEL CLOTH AS PER DRG NO.OFBA/NCP/EXPN/17	21	1031.820 Number
BAG DOSUTI CLOTH Description GREEN COLOUR/WHITE COLOUR AS PER DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67 Specification GREEN COLOUR/WHITE COLOUR AS PER DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67 Drawing no. DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67 Manufacturing Technology Testing / Inspection Facility	21	26366.475 Number
BAG COTTON CALICO BLEACHED FOR NCP 50 KG Description BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017 Specification BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017 Drawing no. 78)OFBA-NR-251-2-Model.pdf Manufacturing Technology MSME IS_5088-1982_REAFFIRMED_2017.pdf Testing / Inspection Facility BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017	21	18880.155 Number
BAG CAMBRIC 15 KG Description BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG. Specification BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG. Drawing no. 79)NEFBNCP26_Model_(1).pdf Manufacturing Technology MSME 5088.pdf Testing / Inspection Facility BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG.	21	3150.000 Number
Bag Polythene for packing NC Description BAG POLYTHENE FOR PACKING NC- QUALITY OF MATERIAL TO CONFORM TO LOW DENSITY POLYETHYLENE TYPE-1 SPECIFICATION JSS- 9330 - 03-2014,REV.NO.3.THICKNESS 0.18 PLUS MINUS 0.02MM.DIMENSION AND HEAT SEALING AS PER DRG.NO.OFBA/NC/46 AMENDED ON 27.03. 2010. Specification BAG POLYTHENE FOR PACKING NC- QUALITY OF MATERIAL TO CONFORM TO LOW DENSITY POLYETHYLENE TYPE-1 SPECIFICATION JSS- 9330 - 03-2014,REV.NO.3.THICKNESS 0.18 PLUS MINUS 0.02MM.DIMENSION AND HEAT SEALING AS PER DRG.NO.OFBA/NC/46 AMENDED ON 27.03. 2010. Drawing no. DRG. NO.OFBA/NC/46 AMENDED ON 27/03/2010. Manufacturing Technology Testing / Inspection Facility	21	124549.020 Number
BAG COTTON TNT 25 KG Description DRG. NO. OFBA/RX/243 AMMENDED ON 07/11/02 Specification DRG. NO. OFBA/RX/243 AMMENDED ON 07/11/02 Drawing no. DRG. NO. OFBA/RX/243 AMMENDED ON 07/11/02 74)OFBARX243_AMENDED-Model.pdf Manufacturing Technology MSME OFBA_RX_243.pdf Testing / Inspection Facility BAG COTTON TNT 25 KG TO DRG. NO. OFBA/RX/243 AMMENDED ON 7.11.02.	21	176688.630 Number
ASS ERA CONTAINER TOP BOX Description ASSY ERA CONTAINER TOP BOX Specification TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5 Drawing no. DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5 Manufacturing Technology MSME HEMRL_MED-PS-290.PDF Testing / Inspection Facility TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5	14	1099.995 Number
ASSY ERA CONTAINER STD BOX Description ASSY ERA CONTAINER STD BOX Specification STANDARD ERA BOX TO SPEC. NO. HERML/MED/PS/290 & HEM RL DRG. NO. 1457/1 & THE PART OF DRAWING AS GIVEN BELOW :- STANDARD BOX CONTAINER WITH CLAMP & COLLAR TO DRG NO. 1457/2 STANDARD BOX CONTAINER TO DRG . NO. 1457/3, COLLAR TO DRG. NO 1457/4, CLAMP TO DRG NO. 1457/5 , LID (STANDARD) TO DRG NO. 1457/6 Drawing no. RL DRG. NO. 1457/1 & THE PART OF DRAWING AS GIVEN BELOW :- STANDARD BOX CONTAINER WITH CLAMP & COLLAR TO DRG NO. 1457/2 STANDARD BOX CONTAINER TO DRG . NO. 1457/3, COLLAR TO DRG. NO 1457/4, CLAMP TO DRG NO. 1457/5 , LID (STANDARD) TO DRG NO. 1457/6 Manufacturing Technology MSME HEMRL_MED-PS-290.PDF Testing / Inspection Facility RL DRG. NO. 1457/1 & THE PART OF DRAWING AS GIVEN BELOW :- STANDARD BOX CONTAINER WITH CLAMP & COLLAR TO DRG NO. 1457/2 STANDARD BOX CONTAINER TO DRG . NO. 1457/3, COLLAR TO DRG. NO 1457/4, CLAMP TO DRG NO. 1457/5 , LID (STANDARD) TO DRG NO. 1457/6	14	1600.005 Number
Ammonia Anhydrous Description AMMONIA ANHYDROUS GRADE-2 TO SPECIFICATION IS/662/1980. REAFFIRMED 2003WITH AMENDMENT 1,2,3&4 WITH THE FOLLOWING REQUIREMENTS 1)PURITY 99.5% MIN(2) OIL CONTENT- 0.002% MAXM. AND OTHER PARAMETERS TO CONFIRM TO IS -662-1980 GR-2 (FIRST REVISION) REAFFIRMED-2003 WITH AMENDMENT 1,2,3&4. Specification AMMONIA ANHYDROUS GRADE-2 TO SPECIFICATION IS/662/1980. REAFFIRMED 2003WITH AMENDMENT 1,2,3&4 WITH THE FOLLOWING REQUIREMENTS 1)PURITY 99.5% MIN(2) OIL CONTENT- 0.002% MAXM. AND OTHER PARAMETERS TO CONFIRM TO IS -662-1980 GR-2 (FIRST REVISION) REAFFIRMED-2003 WITH AMENDMENT 1,2,3&4. Drawing no. Manufacturing Technology MSME 662.pdf Testing / Inspection Facility Specn No-IS:662/1980	10	7.335 Metric tonne(1000kg)
Aluminium Stearate Description ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%. Specification ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%.. Drawing no. Manufacturing Technology MSME IND_ME_970-2016.PDF Testing / Inspection Facility ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%.	10	422.805 Kilogram
Aluminium Powder Heavy Grade I Size 125 Micrometer Description ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER. Specification ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER. Drawing no. Manufacturing Technology MSME JSS_1370-03-2014_(Rev_No__3)_ALUMINIUM_POWDER _HEAVY_GRADE_1.pdf Testing / Inspection Facility ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.	10	4987.500 Kilogram
Aluminium Container SER Description Drg.No.OFBA/PETN/23 Dtd.15.01.1970 Specification ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020. Drawing no. ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020. Manufacturing Technology MSME OFBA_RX_391.jpg Testing / Inspection Facility ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020.	25	25.005 Number
Alkathene Polymer WRN 19 Description ALKATHENE POLYMER WRM-19 TYPE XD POLYTHENE MOULDING AND EXT RUSION MATERIAL(FOR AMMN. APPLICATION) CONFORMING TO SPECN. DEF/STAN 13-9/1. Specification ALKATHENE POLYMER WRM-19 TYPE XD POLYTHENE MOULDING AND EXT RUSION MATERIAL(FOR AMMN. APPLICATION) CONFORMING TO SPECN. DEF/STAN 13-9/1. Drawing no. Manufacturing Technology MSME DEF_STAN_13-9-1.PDF Testing / Inspection Facility ALKATHENE POLYMER WRM-19 TYPE XD POLYTHENE MOULDING AND EXT RUSION MATERIAL(FOR AMMN. APPLICATION) CONFORMING TO SPECN. DEF/STAN 13-9/1.	10	311.925 Kilogram
Acetone Description Specn IS/170-2004Fourt revi with purity percent by mass mini 99% Specification Specn IS/170-2004Fourt revi with purity percent by mass mini 99% Drawing no. Manufacturing Technology MSME 170.pdf Testing / Inspection Facility Specn No. IS / 170-2004 (Latest Revision )	10	1407045.135 Kilogram
30 MM BMP II APT Description 30 MM BMP II APT Specification 30 MM BMP II APT Drawing no. Manufacturing Technology Testing / Inspection Facility	42	600.00 Number

26082

0630/PV/Advance Registration/July 2018/Steel Insert for 5.56mm INSAS

Ordnance Factory Varangaon

The General Manager,
Varangaon
Varangaon
Maharashtra
425308

Name	Code	Quantity	Approx Value	Select
STEEL INSERT FOR 5.56 MM INSAS Description Steel Insert for 5.56mm INSAS To Drg. No. ARDE/SK/2795, DET NO. 9; PART NO IQV 112, DCI NO 36853-A DATED 24.09.2002 and Material to Specification BS : 970 PT - I- 1983, 080 M40/709 M40 or Alternate to Specn. BS : 970 EN 8M Bright Drawn Annealed Wire Specification BS : 970 PT - I- 1983, 080 M40/709 M40 or Alternate to Specn. BS : 970 EN 8M Bright Drawn Annealed Wire Steel_Core_BS_Specification_Part_I.pdf BS_Part_II.pdf BS_Part_III.pdf Drawing no. DRG. NO. ARDE/SK/2795, DET NO. 9; PART NO IQV 112, DCI NO 36853-A DATED 24.09.2002 Drawing_of_Steel_Inser_5_56.pdf Manufacturing Technology Testing / Inspection Facility	99	33700000 Number

26083

0630/PV/Advance Registration/July 2018/Steel Core for AK-47 Bullets.

Ordnance Factory Varangaon

The General Manager,
Varangaon
Varangaon
Maharashtra
425308

Name	Code	Quantity	Approx Value	Select
STEEL CORE FOR AK-47 BULLET Description Steel Core for AK-47 Bullets Specification IS : 1570 (Part-II) 1979/40C8 Or BS:970 Part-I 080-M40/709 M40 Hardness : VPN 450 - 600. Oil Blackened/Oil Dipped Drg. No. VA7/PROV/009 Note :- Weight of the Steel Core is 3.19G to 3.27G i.e. 3.23(+/-0.04)G. IS_1570_PART_II__1979.PDF Steel_Core_BS_Specification_Part_I.pdf BS_Part_II.pdf BS_Part_III.pdf Drawing no. DRG NO. VA7/PROV/0009 Steel_Core_AK_47_Drawing.pdf Manufacturing Technology Testing / Inspection Facility	60	17400000 Number

26084

0630/PV/Advance Registration/July 2018/PP Sheet 250mm

Ordnance Factory Varangaon

The General Manager,
Varangaon
Varangaon
Maharashtra
425308

Name	Code	Quantity	Approx Value	Select
POLYPROPYLENE CORRUGATED SHEET 250mm, ANTI STATIC Description POLYPROPYLENE CORRUGATED SHEET, ANTI STATIC Specification DRAFT SPECIFICATION NO. OFV/SPECN/PP/102, SIZE :- 250 (+/-5)MM X 70 (+/-3)MM, THICKNESS :- 4.5MM TO 5MM, GSM :- 1500 (TOLERANCE +/- 75) specification_of_the_item.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	14	35000 Number

26085

0630/PV/Advance Registration/July 2018/PP Sheet 245mm

Ordnance Factory Varangaon

The General Manager,
Varangaon
Varangaon
Maharashtra
425308

Name	Code	Quantity	Approx Value	Select
POLYPROPYLENE CORRUGATED SHEET 245mm, ANTI STATIC Description POLYPROPYLENE CORRUGATED SHEET, ANTI STATIC Specification DRAFT SPECIFICATION NO. OFV/SPECN/PP/102, SIZE :- 245 (+/-5)MM x 160 (+/-3)MM, THICKNESS :- 4.5MM TO 5MM, GSM :- 1500 (TOLERANCE +/-75) specification_of_the_item.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	14	140000 Number

26086

0630/PV/Advance Registration/July 2018/Link Cartg. Metallic Belt 7.62mm

Ordnance Factory Varangaon

The General Manager,
Varangaon
Varangaon
Maharashtra
425308

Name	Code	Quantity	Approx Value	Select
LINK CARTG. METALLIC BELT 7.62MM M13 Description LINK CARTG. METALLIC BELT 7.62MM M13 Specification TO DRG. NO. F-7268389, DC NO. 36977-A DTD. 24-08-2004 & TO SPECN. :- (I) CIA 4204(b) DC NO. 36977-A DTD. 24-08-2004 (II) JSS : 0465-01-1994 (REVISION NO. 1) NOTE :- MATERIAL TO BE PACKED AS PER 85 A/L TO DRG. NO. ISV 266 GA WHICH CONSIST OF CWP 14A, CARTON 11 A/L AND CARTON 12A CIA_4204_b.PDF JSS_0465_01_1994.PDF Drawing no. F-7268389, DC NO. 36977-A DTD. 24-08-2004 Drawing_F_7268389.pdf Drawing_ISV_266_GA.pdf Manufacturing Technology Testing / Inspection Facility	60	8312000 Number

26087

0630/PV/Advance Registration/Charger Clip 7.62 Ammn.

Ordnance Factory Varangaon

The General Manager,
Varangaon
Varangaon
Maharashtra
425308

Name	Code	Quantity	Approx Value	Select
CHARGER CLIP 7.62 mm AMMUNITION- B Description CHARGER CLIP 7.62MM AMMUNITION-B Specification CIA-4205(d), DC No. 36247-A Dtd.26.02.1997 AS PER DRG. NO. CIA/AMMN/411/IQV/18A, DC(I) 35648-A DT. 12-01-1994. SPRING TO DRG. NO. IQV 61, DCI NO. 36790-A DT. 29-10-2001 & SPECN. IS : 2507-1975. CLIP TO DRG. IQV 62, DCI NO. 36790 DT. 29-10-2001 & SPECN. IS : 513-2008. COLD ROLLED LOW CARBON STEEL (V REV.) GRADE DD. CIA_4205_d.pdf IS_2507_1975.pdf IS_513-2008.pdf DC_No__36790-A.pdf Drawing no. Charger_Drawing.pdf Clip_Drawing.pdf Spring_Drawing.pdf Manufacturing Technology Testing / Inspection Facility	60	705000 Number

26088

0630/PV/Advance Registration/July 2018/Carton Board Ammunition

Ordnance Factory Varangaon

The General Manager,
Varangaon
Varangaon
Maharashtra
425308

Name	Code	Quantity	Approx Value	Select
CARTON BOARD AMMN (787.4 x 558.8 x 0.508) Description CARTON BOARD AMMN (787.4 x 558.8 x 0.508) TO SIZE :- 787.4MM x 558.8MM x 0.508MM (+/-) 0.051MM Specification JSS : 8135-15-2016 (REVISIONN NO. 3) JSS_8135_15_2016.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	14	260000 Sheet

26089

TE NO. 2018000132 DT. 23.07.2018

Ordnance Factory Dehu Road

The General Manager,
Dehu Road
Dehu Road
SELECT count(1) as no_application,FM.name as factory_name FROM `vendor_master` `VM` JOIN `adve
412101

Name	Code	Quantity	Approx Value	Select
SQUIB FOR SIGNAL FLARE Description ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL II TO DRG.NO. NASK 865/1/3 (PROV) Specification ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL II TO DRG.NO. NASK 865/1/3 (PROV) Drawing no. DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL II TO DRG.NO. NASK 865/1/3 (P Manufacturing Technology Testing / Inspection Facility	99	3426 Number

26090

W762017001

Ordnance Factory Ambajhari

The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021

Name	Code	Quantity	Approx Value	Select
DESIGN MAKING OF PROTOTYPE AND TESTING OF RADIO FREQUENCY OSCILLATOR AND DETECTOR WITH ANTENNA TO DETECT THE TARGET WHEN AMMUNITION IS AT A HEIGHT OF 10 METERS IN LOW ANGLE IN PROJECTILE TRAJECTORY AFTER GETTING FIRED BY 155 MM GUN Description DESIGN, MAKING OF PROTOTYPE AND TESTING OF RADIO FREQUENCY OSCILLATOR AND DETECTOR WITH ANTENNA TO DETECT THE TARGET WHEN AMMUNITION IS AT A HEIGHT OF 10 (+/-6) METERS IN LOW ANGLE IN PROJECTILE TRAJECTORY AFTER GETTING FIRED BY 155 MM GUN Specification DESIGN, MAKING OF PROTOTYPE AND TESTING OF RADIO FREQUENCY OSCILLATOR AND DETECTOR WITH ANTENNA TO DETECT THE TARGET WHEN AMMUNITION IS AT A HEIGHT OF 10 (+/-6) METERS IN LOW ANGLE IN PROJECTILE TRAJECTORY AFTER GETTING FIRED BY 155 MM GUN SPECIFICATION.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	00	1 Whole job

26091

No. 6019/12.7/mmw

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
CASE No.: 1 TO 12.7mm A.D.GUN TO DRG.No.: 6P49CdCb D.S.CAT.No.: 5140-000189, D.C.No.:26103-SA, DATED:11/11/2005 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (A 9900)(PACKING BOX FOR 12.7mm AD GUN) Description CASE No.: 1 TO 12.7mm A.D.GUN TO DRG.No.: 6P49CdCb D.S.CAT.No.: 5140-000189, D.C.No.:26103-SA, DATED:11/11/2005 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (A 9900)(PACKING BOX FOR 12.7mm AD GUN) Specification AS PER DRG TO CASE No.: 1 TO 12.7mm A.D.GUN TO DRG.No.: 6P49CdCb D.S.CAT.No.: 5140-000189, D.C.No.:26103-SA, DATED:11/11/2005 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (A 9900)(PACKING BOX FOR 12.7mm AD GUN) DS_CAT_-46.pdf DS_CAT_-47.pdf DS_CAT_-48.pdf DS_CAT_-49.pdf DS_CAT_-53.pdf DS_CAT_-54.pdf DS_CAT_-59.pdf DS_CAT_-63.pdf DS_CAT_-65.pdf DS_CAT_-66.pdf DS_CAT_35.pdf DS_CAT_1005-007672-34.pdf DS_CAT_50.pdf DS_CAT_51.pdf DS_CAT_52.pdf DS_CAT_56.pdf DS_CAT_57.pdf DS_CAT_58.pdf DS_CAT_60.pdf Drawing no. A9900 DS_CAT_NO.pdf Manufacturing Technology Testing / Inspection Facility	70	130 Number

26092

128MMETT18001319

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
RANGE PLATE RH TO DRG NO 30P 4009 st 2 REQUIRED FOR 40mm MGL Physical Verification needed Description RANGE PLATE RH TO DRG NO 30P 4009 st 2 REQUIRED FOR 40mm MGL Specification As per Drawing and specification Drawing no. 30P 4009*2 Drg__No__30P_4009_star_2.pdf Manufacturing Technology FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTIO PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION Manufacturing_Technology.pdf Testing / Inspection Facility FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR RAW MATERIAL	70	1887 Number

26093

128MMETT18001318

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
RANGE PLATE LH TO DRG NO 30P 4008 st 2 REQUIRED FOR 40mm MGL Description RANGE PLATE LH TO DRG. NO. 30P 4008 * 2 REQUIRED FOR 40mm MGL Specification As per the Drawing and specification Drawing no. 30P 4008* 2 Drg_No_30P_4008_star_2.pdf Manufacturing Technology Testing / Inspection Facility	70	1905 Number

26094

128MMETT18001317

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
INVESTMENT CASTING TO DRG No 64C 2026 250 G3 REQUIRED FOR HOLDER TO DRG No 2A42 02 026 C2026 Physical Verification needed Description INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3. REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026). Specification AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3. REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026). Drawing no. C2026 64_C_2026_250_G3_1-2_(1).pdf Manufacturing Technology As per OFT requirements 64_C_2026_250_G3_1-2_(1).pdf Testing / Inspection Facility As per OFT requirements	70	178 Number

26095

2018000071

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Plastic Slide Fasteners Light Special Duty Closed End Auto Lock OG 18 cm. Description Plastic Slide Fasteners Light Special Duty Closed End Auto Lock OG 18 cm. Specification IS:14181 ( Part 1 to 3):2002 ( With all Amendments) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	339238 Number
PLASTIC SLIDE FASTENER LIGHT SPECIAL DUTY CLOSED END AUTOLOCK 22 cm OG Description IS:14181(Part 1 to 3):2002 with amendment no.2,march 2008 Specification IS:14181(Part 1 to 3):2002 with amendment no.2,march 2008 Drawing no. Manufacturing Technology Testing / Inspection Facility	21	67049 Number

26096

O066-17

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
Opt Glass Slab Description Opt Glass Slab EDF-651336 Specification Optical Glass EDF-651336 Drawing no. IS:1400 Striae GRD-A Inclusion GRD Manufacturing Technology Testing / Inspection Facility	26	95 Kilogram
GLASS SLAB BSC-510644 Description GLASS SLAB BSC-510644 Specification GLASS SLAB BSC-510644 SLAB SIZE : 300-400x120-180x30-75mm IS: 1400-1960 Drawing no. Manufacturing Technology Testing / Inspection Facility	26	257 Kilogram

26097

3183000242

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Handle Cocking Slide without Anodizing DRG No. SKM-1004 Description Handle Cocking Slide without Anodizing DRG No. SKM-1004 Specification Handle Cocking Slide without Anodizing DRG No. SKM-1004 Drawing no. DRG No. SKM-1004 Drawing_skm_1004.pdf Manufacturing Technology Testing / Inspection Facility	70	697 Number

26098

3183000249

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
SPRING PLUNGER BUTT ARM FOR JVPC DRG.NO.0204-03-02-03-22-001-00DA Description SPRING PLUNGER BUTT ARM FOR JVPC DRG.NO.0204-03-02-03-22-001-00DA Specification SPRING PLUNGER BUTT ARM FOR JVPC DRG.NO.0204-03-02-03-22-001-00DA Drawing no. DRG.NO.0204-03-02-03-22-001-00DA SPRING_PLUNGER_BUTT_ARM.pdf Manufacturing Technology Testing / Inspection Facility	70	714 Number

26099

20182307/PVCMBBROWN/PV/OCFC/01

Ordnance Cable Factory Chandigarh

The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002

Name	Code	Quantity	Approx Value	Select
PVC MASTER BATCH BROWN AS PER SPECIFICATION Physical Verification needed Description PVC MASTER BATCH BROWN (TO WITHSTAND COLD BEND TEST AT (-) 30 DEGREE CENTIGRATE) Specification PVC MASTER BATCH BROWN (TO WITHSTAND COLD BEND TEST AT (-) 30 DEGREE CENTIGRATE) PVC_MASTER_BATCH_BROWN.pdf Drawing no. Manufacturing Technology AS PER ATTACHMENT. AS PER ATTACHMENT. AS PER ATTACHMENT. AS PER ATTACHMENT. AS PER ATTACHMENT. PVC_Brown_Testing_Manf__Facility.pdf Testing / Inspection Facility AS PER ATTACHMENT. AS PER ATTACHMENT. AS PER ATTACHMENT. AS PER ATTACHMENT. AS PER ATTACHMENT.	70	1250 Kilogram

26100

3183000298

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
PAWL DRG NO.-PHMK-III-1-2 Description AS PER DRG. Specification AS PER DRG. Drawing no. PHMK-III-1-2-_Latest-07-03-2018.pdf Manufacturing Technology Testing / Inspection Facility	70	12058 Number

26101

3183000251

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
POST AIMING Drg. No 1290-000258 Description AS PER DRG Specification AS PER DRG Drawing no. POST_AIMING_1290-000258.pdf Manufacturing Technology Testing / Inspection Facility	71	210 Number

26102

3183000250

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Description PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Specification PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. Drawing no. DS CAT NO.5315-001554 Drg_PIN_REAR_MOUNTING_MG_MK_1_5315_001554.pdf Manufacturing Technology Testing / Inspection Facility	70	327 Number

26103

3183000240

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
TRIGGER GUARD DS CAT NO. 1005-000606 Description AS PER DRG. Specification AS PER DRG. Drawing no. 1005-000606--trigger_gaurd.pdf Manufacturing Technology Testing / Inspection Facility	70	290 Number

26104

3183000241

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Description Specification Drawing no. SKM-306star5.pdf Manufacturing Technology Testing / Inspection Facility	01	278 Number

26105

3183000292

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Description REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Specification REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Drawing no. DRG NO PHMK-III-1-22 Drawing_PHMK_III_1_22.pdf Manufacturing Technology Testing / Inspection Facility	70	8816 Number

26106

3183000306

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
Plunger Change Lever Right for JVPC 5.56 through MIM route / Alt. Material Description Plunger Change Lever Right for JVPC 5.56 through MIM route/ Alt. Material Specification Plunger Change Lever Right for JVPC 5.56 through MIM route/ Alt. Material Drawing no. Drg. No. 0204 03 03 02 36 003 00DA Plunger_Change_Lever_Right.pdf Manufacturing Technology Testing / Inspection Facility	70	605 Number

26107

3183000299

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
St. Forging Plate Bottom to DRG No. SKM-2832 Description St. Forging Plate Bottom to DRG No. SKM-2832 Specification St. Forging Plate Bottom to DRG No. SKM-2832 Drawing no. SKM-2832 forg_plate_bottom_SKM-2832_(2).pdf Manufacturing Technology Testing / Inspection Facility	01	361 Number

26108

3183000300

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
STUD CHANGE LEVER DRG NO. 0204 03 02 02 20 001 00DC FOR JVPC 5.56MM (MIM ROUTE) Description STUD CHANGE LEVER DRG NO. 0204 03 02 02 20 001 00DC FOR JVPC 5.56MM (MIM ROUTE) Specification DRG NO. 0204 03 02 02 20 001 00DC FOR JVPC 5.56MM Drawing no. DRG_STUD_CHANGE_LEVER.pdf Manufacturing Technology Testing / Inspection Facility	70	596 Number

26109

RFI/OTE/ATI1920174/2018

Rifle Factory Ishapur

The General Manager,
Ishapore
Ishapore
West Bengal
743144

Name	Code	Quantity	Approx Value	Select
MODIFIED LEVER CHANGE FOR ASSAULT RIFLE GHAATAK Description MODIFIED LEVER CHANGE TO DRG NO. AR/012/1-ALT/RFI FOR 7.62MM ASSAULT RIFLE (GHAATAK) Specification MODIFIED LEVER CHANGE TO DRG NO. AR/012/1-ALT/RFI FOR 7.62MM ASSAULT RIFLE (GHAATAK) Drawing no. DRG NO. AR/012/1-ALT/RFI DRAWING_OF_MODIFIED_LEVER_CHANGE_FOR_7_62MM_ASSAULT_RIFLE_GHAATAK.pdf Manufacturing Technology Testing / Inspection Facility	70	9000 Number

26110

OLF/MM-2/T-1806010139/2018 DT:20/07/2018

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity
ROD STL LF NO 9927082790 Description ROD STL.TOOL GR.X108CR17MO,60D L.F.NO.9927082790 Specification STL.TOOL CARBON ROUND BAR 60 MM DIA TO IS 6603:2001,GR.X108CR17MO IN THE RUNNING LENGTH OF 2 MTRS AND ABOBE L.F.NO.9927082790 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	120 Kilogram
SHEET STL LF NO 9927073682 Description SHEET STL.GR.D IS:513,2.5 T L.F.NO.9927073682 Specification SHEET STL.IS:513:94,TYPE D (N), 2.5 MM THICK X500WIDEXINTHE RUNNING LENGTH OF 2MTR AND ABOVE L.F.NO.9927073682 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	55 Kilogram
ROD STL LF NO 0145002065 Description ROD STL/ MED CARBON 50 C8 65 D L.F.NO.0145002065 Specification STEEL BRIGHT BAR MEDIUM CARBON 65 MM DIA TO SPECN,IS:7283-920F IS:5517-93 GR.50 C8 IN RUNNING LENGTH OF 2.5 MTRS APPX L.F.NO.0145002065 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	177 Kilogram
ROD STL LF NO 9927082764 Description ROD STL.TOOL GR.T11OW6CR4 12D L.F..NO.9927082764 Specification STEEL TOOL ALLOY ROUND BAR 12.0 MM DIA. AS PER IS:3748:90 GR,T11OW6CR4 IN THE RUNNING LENGTH 2 TO 4 MTRS L.F.NO.9927082764 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	57 Kilogram
ROD STL LF NO 9927094853 Description ROD STL.TOOL GR.75 T6,D 3MM L.F.NO.9927094853 Specification STEEL TOOL ALLOY ROD DIA 3MM TO SPCN IS:3748-90,GR.75 T6 IN THE RUNNING LENGTH OF 2 MTRS AND ABOVE L.F.NO.9927094853 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	15 Kilogram
ROD STL LF NO 9927065311 Description ROD STL.TOOL GR.T90MN6WCR2,D8 L.F.NO.9927065311 Specification ROD TOOL STL ALLOY 8 MM DIA TO SPCN.IS3748:90,GR.T90MN6WCR2 IN THE RUNNING LENGTH OF 2 METRES AND ABOVE L.F.NO.9927065311 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	25 Kilogram
ROD STL LF NO 0333002009 Description ROD STL.ALLOY GR.40CR4,D 10MM L.F.NO.0333002009 Specification STEEL ALLOYED ROD DIA 10MM TO SPCN:IS:7283 GR.40CR4 OF IS:5517,IN RUNNING LENGTH OF 2 TO 3 MTRS .L.F.NO.0333002009 Drawing no. Manufacturing Technology Testing / Inspection Facility	03	45 Kilogram
ROD STL LF NO 0145002050 Description ROD STL.MED CARBON 50C8 50D , L.F.NO.0145002050 Specification STEEL BRIGHT BAR MEDIUM CARBON OF 50 DIA TO SPECN:IS:7283-92 OF IS:5517-93 GR.50 C8 IN RUNNING LENGTH OF 2 MTRS APPX L.F.NO.0145002050 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	202 Kilogram
SHEET STL LF NO 0143022120 Description SHEET STL.GR.45 C8,2MM TH L.F.NO.0143022120 Specification STEEL SHEET MEDIUM CARBON OF 2MM TH.X1000 MM WIDTH TO IS :5517:93 GR.45C8, IN THE RUNNING LENGTH OF 2 MTR AND ABOVE L.F.NO.0143022120 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	27 Kilogram
SHEET STL LF NO 0143022130 Description SHEET STL.GR.45C8,3 MM TH. L.F.NO.0143022130 Specification STEEL SHEET MEDIUM CARBON OF 3 MM TH.X1000 MM WIDTH TO IS:5517:93 GR.45C8, IN THE RUNNING LENGTH OF 2 MTR.AND ABOVE ,L.F.NO.0143022130 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	27 Kilogram
TOOL STL LF NO 0202002012 Description TOOL STL.SHT.GR.80 T3,12 MM TH. L.F.NO.0202002012 Specification TOOL STL.SHT.AS PER IS:3748:90, GR.80T3,12 MM TH.X500 MM WIDE X2 MTRS AND ABOVE L.F.NO.0202002012 Drawing no. Manufacturing Technology Testing / Inspection Facility	02	107 Kilogram
STL SHT LF NO 0131022032 Description STL.SHT.GR.45C8 T32X200 MM ,L.F.NO.0131022032 Specification STEEL SHEET TO SPECN.IS:5517:93 45 C8 SIZE 32 MM THICK X200MM WIDTH IN THE RUNNING LENGTH OF 2 TO 3 MTRS, L.F.NO.0131022032 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	492 Kilogram
SHEET STL LF NO 0143022100 Description SHEET STL.GR.45 C8,1MM TH. L.F.NO.0143022100 Specification STEEL SHEET MEDIUM CARBON OF 1MM TH.X1000 MM WIDTH TO IS:5517:93 GR.45C8, IN THE RUNNING LENGTH OF 2 MTR AND ABOVE, L.F.NO.0143022100 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	27 Kilogram
STEEL SHT LF NO 0133023010 Description STEEL SHT.GR.DD 1MM THICK L.F.NO.0133023010 Specification STEEL SHT.GR.DD IS 513:94 SIZE 1MM TH.X300X1000MM L.F.NO.0133023010 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	17 Kilogram
ROD STL L F NO 9927094737 Description ROD STL.GR.15CR16NI2,D6 L.F.NO.9927094737 Specification STEEL ALLOY NICKEL CHROMIUM ROUND BAR 6.0MM TO SPCN.IS:6603:STEEL GR.15CR16NI2 L.F.NO.9927094737 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	25 Kilogram
ROD STL LF NO 9927088411 Description ROD STL.GR.40CR4,D 35 L.F.NO.9927088411 Specification STEEL ALLOY ROD OF 35 MM DIA TO SPCN:IS:7283,GR:40CR4 OF IS:5517 IN RUNNING LENGTH OF 2 TO 3 MTRS L.F.NO.9927088411 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	132 Kilogram
ROD STL LF NO 0145002045 Description ROD STL.MED CARBON , 50C8 45 D , L.F.NO.0145002045 Specification MEDIUM CARBON STEEL ROD 45 MM DIA TO SPCN.IS:7283-92 OF IS:5517-93 GR.50C8 IN RUNNING LENGTH OF 2.5 TO 3 MTRS. L.F.NO.0145002045 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	135 Kilogram
ROD STL LF NO 9927073548 Description ROD STL.GR.45C8,D5 L.F.NO.9927073548 Specification STEEL MEDIUM CARBON ROUND BRIGHT BAR 5.0MM TO SPCN.IS:7283:C-45, L.F.NO.9927073548 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	97 Kilogram
STEEL SHT L F NO 9927079814 Description STEEL SHT.GRX15CR16NI2,IS 6911:92,SIZE 1.4MM THX300X1000.DRG.NO.U-7381485-01, L.F.NO.9927079814 Specification STEEL SHT.GRX15CR16NI2,IS 6911:92,SIZE 1.4MM THX300X1000.DRG.NO.U-7381485-01, L.F.NO.9927079814 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	10 Kilogram

26111

MPF/PV/18TE210246

Machine Tool Proto Type Factory

The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502

Name	Code	Quantity	Approx Value	Select
Description Specification 7118120402_OTE.pdf TERMS_AND_CONDITION_18TE_210246.pdf essential_documents.pdf Drawing no. 7118120402_OTE.pdf TERMS_AND_CONDITION_18TE_210246.pdf essential_documents.pdf Manufacturing Technology Testing / Inspection Facility	71	79 Number

26112

128MMETT18001314

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO K IC 4007 Description IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007 Specification IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007 Drawing no. K 4007 DRAWING_4007.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE	70	5500 Number

26113

128MMETT18001313

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
RETAINER TO DRG NO MIM K 2091 01 TAR Description RETAINER TO DRG NO MIM K 2091 01 TAR Specification RETAINER TO DRG NO MIM K 2091 01 TAR Drawing no. MIM-K-2091-01 (TAR) Drg_Retainer_MIM.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE	70	5500 Number

26114

128MMETT18001312

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
CROSS BOLT HOOK LATCH AS PER DRG NO MIM K 4004 02 TAR Description CROSS BOLT HOOK LATCH AS PER DRG NO MIM K 4004 02 TAR Specification CROSS BOLT HOOK LATCH AS PER DRG NO MIM K 4004 02 TAR Drawing no. MIM - K-4004-02 (TAR) Drg_CROSS_BOLT_HOOK_LATCH_MIM.pdf Manufacturing Technology AS PER DRAWING MFG.pdf Testing / Inspection Facility INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE	70	5500 Number

26115

128MMETT18001311

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
IC PISTOL GRIP BASE AS PER DRG NO IC1106 Description IC PISTOL GRIP BASE AS PER DRG NO K-IC-1106 Specification AS PER DRG NO K-IC-1106 Drawing no. K IC 1106 DRAWING_1106.pdf Manufacturing Technology Testing / Inspection Facility	70	5500 Number

26116

2018000070

Ordnance Clothing Factory Shahjahanpur

The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001

Name	Code	Quantity	Approx Value	Select
Double Layer Bonded Polyester Fleece White 145 cm Description Schedule No. S/5387/ Bonded Polyester Fleece OG/2009/TC-19 except Polyester Fleece shall be white Specification Schedule No. S/5387/ Bonded Polyester Fleece OG/2009/TC-19 except Polyester Fleece shall be white Drawing no. Manufacturing Technology Testing / Inspection Facility	21	6030 Metre

26117

186010/OFBA

Ordnance Factory Bhandara

The General Manager,
Bhandara
Bhandara
Maharashtra
441906

Name	Code	Quantity	Approx Value	Select
Cloth Cotton Cambric White 45 Inches Wide115 cm Description CLOTH COTTON CAMBRIC WHITE 45" WIDE (115 CM) AS PER B.F. SPECIFICATION NO. 1.6 DATED 30-4-79. AMENDED ON 15.05.2004. Specification CLOTH COTTON CAMBRIC WHITE 45" WIDE (115 CM) AS PER B.F. SPECIFICATION NO. 1.6 DATED 30-4-79. AMENDED ON 15.05.2004. Drawing no. Manufacturing Technology MSME BF_1_6.PDF Testing / Inspection Facility CLOTH COTTON CAMBRIC WHITE 45" WIDE (115 CM) AS PER B.F. SPECIFICATION NO. 1.6 DATED 30-4-79. AMENDED ON 15.05.2004.	21	2325 Metre

Proceed