MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3

MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3

JSS: 9160-05 2016, Revision No.-3.

JSS: 9160-05 2016, Revision No.-3.

• MSME

• JSS: 9160-05 2016, Revision No.-3.

LECITHIN SPECIFICATION :- ERDL/TRIM/PROP/RM/8

LECITHIN SPECIFICATION :- ERDL/TRIM/PROP/RM/8

• MSME

• LECITHIN SPECIFICATION :- ERDL/TRIM/PROP/RM/8

LEAD TUBE FOR MANUFACTURE OF FLSC-10 CHARGES CONFIRMING TO THE SPECIFICATION -IND/MEM911(PROV)DC 3842-ME DT. 04.04.05 1)LEAD PURITY=99.5% MIN. 2)M.P.=315 DEG.CENTI. MIN.3)OD=20.5 1.5MM 4)ID=12.7 1.0MM 5)WALL THICKNESS 3.90 0.25MM 6)LENGTH OF EACH LEAD TUBE=3805MM

LEAD TUBE FOR MANUFACTURE OF FLSC-10 CHARGES CONFIRMING TO THE SPECIFICATION -IND/MEM911(PROV)DC 3842-ME DT. 04.04.05 1)LEAD PURITY=99.5% MIN. 2)M.P.=315 DEG.CENTI. MIN.3)OD=20.5 1.5MM 4)ID=12.7 1.0MM 5)WALL THICKNESS 3.90 0.25MM 6)LENGTH OF EACH LEAD TUBE=3805MM

LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM

LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM

• MSME

• LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM

LEAD TUBE FOR CLC-1 SPECIFICATIONIS 404 : PART 1 : 1993 (REAFFIRMED 2019),GRADE-1. LEAD PURITY:99.8 % (MIN). DIMENTION:ID=160.2 MM.DO=230.2 MM. THICKNESS VARIATION:0.4 MM.LENGHT OF COIL 4 MTR

LEAD TUBE FOR CLC-1 SPECIFICATIONIS 404 : PART 1 : 1993 (REAFFIRMED 2019),GRADE-1. LEAD PURITY:99.8 % (MIN). DIMENTION:ID=160.2 MM.DO=230.2 MM. THICKNESS VARIATION:0.4 MM.LENGHT OF COIL 4 MTR

• MSME

• LEAD TUBE FOR CLC-1 SPECIFICATIONIS 404 : PART 1 : 1993 (REAFFIRMED 2019),GRADE-1. LEAD PURITY:99.8 % (MIN). DIMENTION:ID=160.2 MM.DO=230.2 MM. THICKNESS VARIATION:0.4 MM.LENGHT OF COIL 4 MTR

LEAD SEAL SIZE 1/2" DIA TO DRG. NO. OFBA/NR/613 DTD.09.12.06

LEAD SEAL SIZE 1/2" DIA TO DRG. NO. OFBA/NR/613 DTD.09.12.06

LEAD OXIDE (LITHARGE) REQUIRED FOR MANUFACTURE OF ROCKET PROP.AND SINGLE BASE PROPELLANT AS PER SPECN. JSS 6810-111 2017 (3rd Rev)

LEAD OXIDE (LITHARGE) REQUIRED FOR MANUFACTURE OF ROCKET PROP.AND SINGLE BASE PROPELLANT AS PER SPECN. JSS 6810-111 2017 (3rd Rev)

• MSME

• LEAD OXIDE (LITHARGE) REQUIRED FOR MANUFACTURE OF ROCKET PROP.AND SINGLE BASE PROPELLANT AS PER SPECN. JSS 6810-111 2017 (3rd Rev)

ISOPHORONE DI-ISOCYNATE (IPDI), MERCK/FLUKA, SPECN :- I) PURITY (MINIMIM) -98%, II) DENSITY G/CM CUBE-1.06 PLUS MINUS 0.05 MAKE - MERCK/FLUKA.

ISOPHORONE DI-ISOCYNATE (IPDI), MERCK/FLUKA, SPECN :- I) PURITY (MINIMIM) -98%, II) DENSITY G/CM CUBE-1.06 PLUS MINUS 0.05 MAKE - MERCK/FLUKA.

IRON (III), ACETYLACETONATE, (FeAA) 97% NOF 300

IRON (III), ACETYLACETONATE, (FeAA) 97% NOF 300

INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008 (Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.

INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008 (Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.

• MSME

• INDUSTRIAL X-RAY FILMS CONFORMING TO IS:2595:2008 (Reaffirmed Year : 2020 )G-III CLASS OR MAKE: NDT-65 OR IRF-150 OR AGFA-D7 OR INDUSTREX AA-400 ARE ALSO ACCEPTABLE. SIZE:30 X 40 CM, AS PER SPECIFICATION ATTACHED.

B.F. Specification 1.20 Dtd 06.10.96 amended on 07.10.2006

B.F. Specification 1.20 Dtd 06.10.96 amended on 07.10.2006

• MSME

• B.F. Specification 1.20 Dtd 06.10.96 amended on 07.10.2006

HEXAMETHYLENE DIISOCYANATE, EX-MERCK/FLUKAASSAY:> 98% ( GC ), DENSITY : 1.05 G/CC (AT 20 C)IN 500 ML PACKING .

HEXAMETHYLENE DIISOCYANATE, EX-MERCK/FLUKAASSAY:> 98% ( GC ), DENSITY : 1.05 G/CC (AT 20 C)IN 500 ML PACKING .

CASE HEMK-1 (MODIFIED)L/A WOOD TO DRG.NO.IND/ME/29 DC NO 3604-ME DT.13.12.99.

CASE HEMK-1 (MODIFIED)L/A WOOD TO DRG.NO.IND/ME/29 DC NO 3604-ME DT.13.12.99.

DRG. NO. IND/ME/29, DC NO. 3604-ME DTD. 13.12.99

• MSME

• CASE HEMK-1 (MODIFIED)L/A WOOD TO DRG.NO.IND/ME/29 DC NO 3604-ME DT.13.12.99.

HARDENER EH 411/YUVA H-50/RC-206 HD HEMRL/TRIM/PROP/IM/15, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

HARDENER EH 411/YUVA H-50/RC-206 HD HEMRL/TRIM/PROP/IM/15, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

• MSME

• HARDENER EH 411/YUVA H-50/RC-206 HD HEMRL/TRIM/PROP/IM/15, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

H.T.P.B. ( HYDROXY TERMINATED POLY BUTADIENE ) SPECIFICATION :-HEMRL/TRIM/PROP/RM/4.(REVISED).DT OF REVISION;09/01/2013.

H.T.P.B. ( HYDROXY TERMINATED POLY BUTADIENE ) SPECIFICATION :-HEMRL/TRIM/PROP/RM/4.(REVISED).DT OF REVISION;09/01/2013.

• MSME

• H.T.P.B. ( HYDROXY TERMINATED POLY BUTADIENE ) SPECIFICATION :-HEMRL/TRIM/PROP/RM/4.(REVISED).DT OF REVISION;09/01/2013.

GUN POWDER FOR 155MM AMMUNITION AS PER SPECN. IND/ME/974 (2016) DC NO 6010-ME, DT-03.02.2017

GUN POWDER FOR 155MM AMMUNITION AS PER SPECN. IND/ME/974 (2016) DC NO 6010-ME, DT-03.02.2017

• MSME

• GUN POWDER FOR 155MM AMMUNITION AS PER SPECN. IND/ME/974 (2016) DC NO 6010-ME, DT-03.02.2017

GRAPHITE DRY SULPHUR FREE TO SPECN. NO. JSS-9620-01-2016 (REV.NO.3), SIZE - 63 MICROMETER.

GRAPHITE DRY SULPHUR FREE TO SPECN. NO. JSS-9620-01-2016 (REV.NO.3), SIZE - 63 MICROMETER.

• MSME

• GRAPHITE DRY SULPHUR FREE TO SPECN. NO. JSS-9620-01-2016 (REV.NO.3), SIZE - 63 MICROMETER.

GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST.

GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST.

• MSME

• GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST.

FORMALDEHYDE SOLUTION 37-41 % W/V, A.R.GRADE IN 2500 ML PACKING SPECIFICATION NO.- IS :3321-1973. REAFFIRMED 2015

FORMALDEHYDE SOLUTION 37-41 % W/V, A.R.GRADE IN 2500 ML PACKING SPECIFICATION NO.- IS :3321-1973. REAFFIRMED 2015

• MSME

• FORMALDEHYDE SOLUTION 37-41 % W/V, A.R.GRADE IN 2500 ML PACKING SPECIFICATION NO.- IS :3321-1973. REAFFIRMED 2015

DECOPPERING AGENT FOR CHARGE 8 & 9 DRG.NO. 6388122 155 MM FH 77 B- DC NO. 36819-A DT- 15.03.2002.

DECOPPERING AGENT FOR CHARGE 8 & 9 DRG.NO. 6388122 155 MM FH 77 B- DC NO. 36819-A DT- 15.03.2002.

• MSME

• DECOPPERING AGENT FOR CHARGE 8 & 9 DRG.NO. 6388122 155 MM FH 77 B- DC NO. 36819-A DT- 15.03.2002.

TYPE- ANTIMONY TRIOXIDE(SB203), COLOUR & APPEARANCE- WHITE, ODOURLESS,CRYSTALLINE POWDER, PURITY 99.5% SIEVE SIZE-ALL PASSING THROUGH -200BSS ,SPECFIC GRAVITY 5.67 g/cc HEMRL/TRIM/PROP/IM/17, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

TYPE- ANTIMONY TRIOXIDE(SB203), COLOUR & APPEARANCE- WHITE, ODOURLESS,CRYSTALLINE POWDER, PURITY 99.5% SIEVE SIZE-ALL PASSING THROUGH -200BSS ,SPECFIC GRAVITY 5.67 g/cc HEMRL/TRIM/PROP/IM/17, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

• MSME

• TYPE- ANTIMONY TRIOXIDE(SB203), COLOUR & APPEARANCE- WHITE, ODOURLESS,CRYSTALLINE POWDER, PURITY 99.5% SIEVE SIZE-ALL PASSING THROUGH -200BSS ,SPECFIC GRAVITY 5.67 g/cc HEMRL/TRIM/PROP/IM/17, DOC NO.-HEMRL/PIN/MQAP/6, REV NO.-6.

EXPANDED POLYSTYRENE SELF EXTINGUISHING TYPE(TYPE 2) DENSITY 30 KG/CU.M.CONFORMING TO CLAUSE 4.5.1 OF SPECIFICATION IS: 4671-1984 ( FIRST REV.) REAFFIRMED 2017 TO CQA(A) DRAWING NO 13981-1.0 DC 35707-A DTD 5-5-94 SIZE 108MM PLUS MINUS 2MM X 108MM PLUS MINUS 2MM X 64MM PLUS MINUS 2MM.

EXPANDED POLYSTYRENE SELF EXTINGUISHING TYPE(TYPE 2) DENSITY 30 KG/CU.M.CONFORMING TO CLAUSE 4.5.1 OF SPECIFICATION IS: 4671-1984 ( FIRST REV.) REAFFIRMED 2017 TO CQA(A) DRAWING NO 13981-1.0 DC 35707-A DTD 5-5-94 SIZE 108MM PLUS MINUS 2MM X 108MM PLUS MINUS 2MM X 64MM PLUS MINUS 2MM.

• MSME

• EXPANDED POLYSTYRENE SELF EXTINGUISHING TYPE(TYPE 2) DENSITY 30 KG/CU.M.CONFORMING TO CLAUSE 4.5.1 OF SPECIFICATION IS: 4671-1984 ( FIRST REV.) REAFFIRMED 2017 TO CQA(A) DRAWING NO 13981-1.0 DC 35707-A DTD 5-5-94 SIZE 108MM PLUS MINUS 2MM X 108MM PLUS MINUS 2MM X 64MM PLUS MINUS 2MM.

Appendix 'C' of Provisional specification No. S/2594/B/TC-15 and Cuff Rib in Tubular Form

Appendix 'C' of Provisional specification No. S/2594/B/TC-15 and Cuff Rib in Tubular Form

Appendix 'C' of Provisional specification No. S/2594/B/TC-15, Knitted fabric is in open width and 2X2 Durby Knit

Appendix 'C' of Provisional specification No. S/2594/B/TC-15, Knitted fabric is in open width and 2X2 Durby K

Specification :- As per relevant Clause of provisional specification No.S/3558/A/TC-15/Coat ECC & Sizes as per Factory requirement

Specification :- As per relevant Clause of provisional specification No.S/3558/A/TC-15/Coat ECC & Sizes as per Factory requirement

Specn. 0.46 mm (min) thick (at 10 KPa Pressure) and braking strength 231 N/6.5 mm

Specn. 0.46 mm (min) thick (at 10 KPa Pressure) and braking strength 231 N/6.5 mm

Specn. 0.46 mm (min) thick (at 10 KPa Pressure) and braking strength 507 N/10.5 mm(When tested to IS: 1969)

Specn. 0.46 mm (min) thick (at 10 KPa Pressure) and braking strength 507 N/10.5 mm(When tested to IS: 1969)

Specification :- Diameter 2.8 mm, Breaking strength 17 kgf

Specification :- Diameter 2.8 mm, Breaking strength 17 kgf

Specification:- Diameter - 3.0 m m, Nylon Core , Breaking Strength 17 KGF

Specification:- Diameter - 3.0 m m, Nylon Core , Breaking Strength 17 KGF

ETHYLENE GLYCOL MONOETHYLETHER (CELLOSOLVE SOLVENT) SPECN. NO. IND/ME/422 (a) 3754-ME-DT.12.12.2002.

ETHYLENE GLYCOL MONOETHYLETHER (CELLOSOLVE SOLVENT) SPECN. NO. IND/ME/422 (a) 3754-ME-DT.12.12.2002.

• MSME

• ETHYLENE GLYCOL MONOETHYLETHER (CELLOSOLVE SOLVENT) SPECN. NO. IND/ME/422 (a) 1976 DC NO 3754-ME DT.12.12.2002.

ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

CETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

ETHER SOLVENT GRADE(STABILISER FREE)TO SPECIFICATION NO. IS-336-1973(SECOND REVISION) REAFFIRMED -2018

ETHER SOLVENT GRADE(STABILISER FREE)TO SPECIFICATION NO. IS-336-1973(SECOND REVISION) REAFFIRMED -2018

• MSME

• ETHER SOLVENT GRADE(STABILISER FREE)TO SPECIFICATION NO. IS-336-1973(SECOND REVISION) REAFFIRMED -2018

WASHER END WHITE NORMAL ARROW CHARGES TO DRG NO. OFBA/RK/221 DT.02.07.83

WASHER END WHITE NORMAL ARROW CHARGES TO DRG NO. OFBA/RK/221 DT.02.07.83

• MSME

• WASHER END WHITE NORMAL ARROW CHARGES TO DRG NO. OFBA/RK/221 DT.02.07.83

CIA DRG NO. 12911-0-0 DC(I) 34186-A DTD. 03.08.87 WITH MATERIAL SPEC. CI NO.3.2 OF IS 1719:1985 REAFFIREMED IN 1995 (LATEST REV)

CIA DRG NO. 12911-0-0 DC(I) 34186-A DTD. 03.08.87 WITH MATERIAL SPEC. CI NO.3.2 OF IS 1719:1985 REAFFIREMED IN 1995 (LATEST REV)

CIA DRG NO. 12911-0-0 DC(I) 34186-A DTD. 03.08.87 WITH MATERIAL SPEC. CI NO.3.2 OF IS 1719:1985 REAFFIREMED IN 1995 (LATEST REV)

DI PHENYL METHANE DI-ISOCYNATE. TO HEMRL Spcn. No. HEMRL/ED/ PS/318 Origional Sealed bottle of "Merck" made

DI PHENYL METHANE DI-ISOCYNATE. TO HEMRL Spcn. No. HEMRL/ED/ PS/318 Origional Sealed bottle of "Merck" made

• MSME

• DI PHENYL METHANE DI-ISOCYNATE. TO HEMRL Spcn. No. HEMRL/ED/ PS/318 Origional Sealed bottle of "Merck" made

DIPHENYLAMINE CONFORMING TO SPECIFICATION JSS 6810-129-2020 REVISION NO 4.

DIPHENYLAMINE CONFORMING TO SPECIFICATION JSS 6810-129-2020 REVISION NO 4.

• MSME

• DIPHENYLAMINE CONFORMING TO SPECIFICATION JSS 6810-129-2020 REVISION NO 4.

DIOCTYLE PHTHALATE AS PER SPECN.NO. IS 14421:1997 REAFFIRMED -2018. TEST TO BE CARRIED OUT FOR CHARACTERISTICS,1)RELATIVE DENSITY 2)REFRACTIVE INDEX 3)WATER CONTENT 4)ACID VALUE 5) ESTER (SAPHONIFICATION) VALUE

DIOCTYLE PHTHALATE AS PER SPECN.NO. IS 14421:1997 REAFFIRMED -2018. TEST TO BE CARRIED OUT FOR CHARACTERISTICS,1)RELATIVE DENSITY 2)REFRACTIVE INDEX 3)WATER CONTENT 4)ACID VALUE 5) ESTER (SAPHONIFICATION) VALUE

• MSME

• DIOCTYLE PHTHALATE AS PER SPECN.NO. IS 14421:1997 REAFFIRMED -2018. TEST TO BE CARRIED OUT FOR CHARACTERISTICS,1)RELATIVE DENSITY 2)REFRACTIVE INDEX 3)WATER CONTENT 4)ACID VALUE 5) ESTER (SAPHONIFICATION) VALUE

DINITROTOLUENE GRADE 1 CONFORMING TO SPECIFICATION NUMBER JSS-1376-04 : 2019(REVISION NO. 4).

DINITROTOLUENE GRADE 1 CONFORMING TO SPECIFICATION NUMBER JSS-1376-04 : 2019(REVISION NO. 4).

• MSME

• DINITROTOLUENE GRADE 1 CONFORMING TO SPECIFICATION NUMBER JSS-1376-04 : 2019(REVISION NO. 4)

TYPE- MONOEPOXY, COLOUR & APPEARANCE -BROWN CLEAR LIQUID, DENSITY AT 25 DEG. CEL. 0.985 g/ml, VISCOSITY AT 25 DEG. CEL. 100 cps. EPOSIDE EQUIVALENT 550+ 50

TYPE- MONOEPOXY, COLOUR & APPEARANCE -BROWN CLEAR LIQUID, DENSITY AT 25 DEG. CEL. 0.985 g/ml, VISCOSITY AT 25 DEG. CEL. 100 cps. EPOSIDE EQUIVALENT 550+ 50

DICHLOROMETHANE. AR GRADE, EX-S.D. FINE/GLAXO PURITY : MIN. 99.5 %, WATER : MAX. 0.02 % IN 2.5 LITRE PACKINGS.

DICHLOROMETHANE. AR GRADE, EX-S.D. FINE/GLAXO PURITY : MIN. 99.5 %, WATER : MAX. 0.02 % IN 2.5 LITRE PACKINGS.

DIAMYL PHTHALATE CONFORMING TO SPECN NO.IND/ME/872 : 2015 DC - 5383-ME, DT. 21.12.2015.

DIAMYL PHTHALATE CONFORMING TO SPECN NO.IND/ME/872 : 2015 DC - 5383-ME, DT. 21.12.2015.

• MSME

• DIAMYL PHTHALATE CONFORMING TO SPECN NO.IND/ME/872 : 2015 DC - 5383-ME, DT. 21.12.2015.

IND/ME/873(A)Prov.DC No.3754-ME,dated 12.12.2002

IND/ME/873(A)Prov.DC No.3754-ME,dated 12.12.2002

Specn-ERDL/TRIM/Prov/RM/5

Specn-ERDL/TRIM/Prov/RM/5

.(CATALYST)MERCK/ALDRICH. PURITY (TIN CONTENT)- >97%Molecular weight (MW)- 631.55 g/molDENSITY: 1 Ltr=1.05 KGMinimum assay (Sn)>97% - ONLY MERCK/ALDRICH MAKE ACCEPTABLE

.(CATALYST)MERCK/ALDRICH. PURITY (TIN CONTENT)- >97%Molecular weight (MW)- 631.55 g/molDENSITY: 1 Ltr=1.05 KGMinimum assay (Sn)>97% - ONLY MERCK/ALDRICH MAKE ACCEPTABLE

GALVANIZED STEEL SHEET TYPE DEEP DRAWING DESIGNATION B GPO TO SPECN. IS:277-2003. AS PER DRG. NO. OFBA/CX/51 DT.24.02.1989 & 05.01.2007 (FOR ITEM NO. 5 & 6) AMENDED ON DT.10.10.2008. TRACED FROM DRG.NO. DD (L) 16472 B AMENDED VIDE DC. NO. 37189-A DT. 22.09.2008. INCLUDING FELT DISC.

GALVANIZED STEEL SHEET TYPE DEEP DRAWING DESIGNATION B GPO TO SPECN. IS:277-2003. AS PER DRG. NO. OFBA/CX/51 DT.24.02.1989 & 05.01.2007 (FOR ITEM NO. 5 & 6) AMENDED ON DT.10.10.2008. TRACED FROM DRG.NO. DD (L) 16472 B AMENDED VIDE DC. NO. 37189-A DT. 22.09.2008. INCLUDING FELT DISC.

DRG. NO. OFBA/CX/51 DT.24.02.1989 & 05.01.2007 (FOR ITEM NO. 5 & 6) AMENDED ON DT.10.10.2008. TRACED FROM DRG.NO. DD (L) 16472 B AMENDED VIDE DC. NO. 37189-A DT. 22.09.2008. INCLUDING FELT DISC.

• MSME

• CYLINDER 443 MK1/L"GALVANIZED STEEL SHEET TYPE"DEEP DRAWING" DESIGNATION 'GPD' TO SPECN.IS:277-2003"AS PER DRG.NO OFBA/CX /51 DT 24/2/89 & 5/1/07 (FOR ITEM NO. 5 & 6) AMENDED ON DTD. 10.10.08 TRACED FROMDRG.NO DD(L) 16472 B AMENDED VIDE DC-37 189-A DT.22/09/08.INCLUDING FELT DISC.

CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.

CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.

DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.

• MSME

• DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.

CUTTING AND STITCHING OF CHARGE BAGS FOR CHARGE 9 OF 155MM AMMN.AS PER DRG.NO-6388103,6388104,6388106,6388115,6388116, 6355588,5191810,5173926,4090246,4090247,4079932. MATERIAL WILL BE SUPPLIED BY OFBA.

CUTTING AND STITCHING OF CHARGE BAGS FOR CHARGE 9 OF 155MM AMMN.AS PER DRG.NO-6388103,6388104,6388106,6388115,6388116, 6355588,5191810,5173926,4090246,4090247,4079932. MATERIAL WILL BE SUPPLIED BY OFBA.

CUTTING AND STITCHING OF CHARGE BAGS FOR CHARGE 9 OF 155MM AMMN.AS PER DRG.NO-6388103,6388104,6388106,6388115,6388116, 6355588,5191810,5173926,4090246,4090247,4079932. MATERIAL WILL BE SUPPLIED BY OFBA.

CUTTING & STITCHING OF CHARGE BAGS FOR M4A2 AS PER DRG.NO- 12882-2-0 TO 12884-2-0,12885-1-0,12886-0-0,12887-0-0,12888-1 -0,12890-2-0,NO 12909-0-0 , 12910-0-0,14776-0-0 TO 14778-0- 0,13976-0-0,12891-0-0,12899-0-0,12905-0-0. MATERIAL WILL BE SUPPLIED BY OFBA.

CUTTING & STITCHING OF CHARGE BAGS FOR M4A2 AS PER DRG.NO- 12882-2-0 TO 12884-2-0,12885-1-0,12886-0-0,12887-0-0,12888-1 -0,12890-2-0,NO 12909-0-0 , 12910-0-0,14776-0-0 TO 14778-0- 0,13976-0-0,12891-0-0,12899-0-0,12905-0-0. MATERIAL WILL BE SUPPLIED BY OFBA.

CUTTING & STITCHING OF CHARGE BAGS FOR M4A2 AS PER DRG.NO- 12882-2-0 TO 12884-2-0,12885-1-0,12886-0-0,12887-0-0,12888-1 -0,12890-2-0,NO 12909-0-0 , 12910-0-0,14776-0-0 TO 14778-0- 0,13976-0-0,12891-0-0,12899-0-0,12905-0-0. MATERIAL WILL BE SUPPLIED

• MSME

• CUTTING & STITCHING OF CHARGE BAGS FOR M4A2 AS PER DRG.NO- 12882-2-0 TO 12884-2-0,12885-1-0,12886-0-0,12887-0-0,12888-1 -0,12890-2-0,NO 12909-0-0 , 12910-0-0,14776-0-0 TO 14778-0- 0,13976-0-0,12891-0-0,12899-0-0,12905-0-0. MATERIAL WILL BE SUPPLIED BY OFBA.

CUPROUS OXIDE AS PER SPECN.IS:70-1980 ( REAFFIRMED 2002 ) AMDS 2 FIRST REVISION.

CUPROUS OXIDE AS PER SPECN.IS:70-1980 ( REAFFIRMED 2002 ) AMDS 2 FIRST REVISION.

CRUDE BEES WAX AS PER SPECIFICATION NO. IS-1504-1996 REAFFIRMED 2014.

CRUDE BEES WAX AS PER SPECIFICATION NO. IS-1504-1996 REAFFIRMED 2014.

• MSME

• CRUDE BEES WAX AS PER SPECIFICATION NO. IS-1504-1996 REAFFIRMED 2014.

CRATE 5 A/L WIRE BOUND FOR PACKAGE AMMUNITION 79A TO DRG.NO OFBA/CX/55 DTS-16.08.94 AMMENDED ON 15.02.02. TRACED FROM CI(A)/AMN/754 PART NO ISV 326A DC (I) 30562-A SPECN. IA 948 (a.f ) DC 36081A.

CRATE 5 A/L WIRE BOUND FOR PACKAGE AMMUNITION 79A TO DRG.NO OFBA/CX/55 DTS-16.08.94 AMMENDED ON 15.02.02. TRACED FROM CI(A)/AMN/754 PART NO ISV 326A DC (I) 30562-A SPECN. IA 948 (a.f ) DC 36081A.

DRG.NO OFBA/CX/55 DTS-16.08.94 AMMENDED ON 15.02.02

• MSME

• CRATE 5 A/L WIRE BOUND FOR PACKAGE AMMUNITION 79A TO DRG.NO OFBA/CX/55 DTS-16.08.94 AMMENDED ON 15.02.02. TRACED FROM CI(A)/AMN/754 PART NO ISV 326A DC (I) 30562-A SPECN. IA 948 (a.f ) DC 36081A.

Crepe/Natural Rubber Grade PLC-I or PLC-I -X to Defense Specification No. IND/ME/748(b), DC- 3754-ME, Dt:12/12/2002.

Crepe/Natural Rubber Grade PLC-I or PLC-I -X to Defense Specification No. IND/ME/748(b), DC- 3754-ME, Dt:12/12/2002.

• MSME

• Crepe/Natural Rubber Grade PLC-I or PLC-I -X to Defense Specification No. IND/ME/748(b), DC- 3754-ME, Dt:12/12/2002.

COTTON YARN NE 2/2 CONFORMING TO SPECIFICATION NO.IND/ME/800 DC3754-ME DTD. 12.12.2002 "MATERIAL TO BE SUPPLIED AS PER OFBaDrg.No.OFBA/CX/85 dt.22.03.2006 for Cotton Yarn NE 2/2 Bundle.

COTTON YARN NE 2/2 CONFORMING TO SPECIFICATION NO.IND/ME/800 DC3754-ME DTD. 12.12.2002 "MATERIAL TO BE SUPPLIED AS PER OFBaDrg.No.OFBA/CX/85 dt.22.03.2006 for Cotton Yarn NE 2/2 Bundle.

OFBaDrg.No.OFBA/CX/85 dt.22.03.2006 for Cotton Yarn NE 2/2 Bundle.

SPECN. NO. IND/ME/800-DC-3754-ME DATED 12.12.2000 & DRG NO. OFBA/CX/86 DT 23/03/2006 AMENDED ON DTD. 29/09/2008

SPECN. NO. IND/ME/800-DC-3754-ME DATED 12.12.2000 & DRG NO. OFBA/CX/86 DT 23/03/2006 AMENDED ON DTD. 29/09/2008

WHITE COLOURED CLOTH COTTON DOWN TIGHT TO SPECN. IND/ME/1005 (OCT.2012), DC 5105-ME DT.27-04-2013, WIDTH:1400 MM.

WHITE COLOURED CLOTH COTTON DOWN TIGHT TO SPECN. IND/ME/1005 (OCT.2012), DC 5105-ME DT.27-04-2013, WIDTH:1400 MM.

• MSME

• WHITE COLOURED CLOTH COTTON DOWN TIGHT TO SPECN. IND/ME/1005 (OCT.2012), DC 5105-ME DT.27-04-2013, WIDTH:1400 MM.

CORUGATED CARD BOARD SHEET EACH ST CONSIST OF A) PKG. SHEET IV HEMRL/ED/DRG NO. 002 DET NO.1 SIZE 470X180X10MM THK, 4 NOS/SET B)PKG. SHEET V DET NO.2 SIZE 170X160X20MM THK, 2 NOS/SET C)PKG. SHEETVI DET NO.3 SIZE 135X160X40MM THK, 1 NOS/SET D)PKG. SHEET VII DET NO.4 SIZE 410X160X25MM THK, 1 NOS/SET

CORUGATED CARD BOARD SHEET EACH ST CONSIST OF A) PKG. SHEET IV HEMRL/ED/DRG NO. 002 DET NO.1 SIZE 470X180X10MM THK, 4 NOS/SET B)PKG. SHEET V DET NO.2 SIZE 170X160X20MM THK, 2 NOS/SET C)PKG. SHEETVI DET NO.3 SIZE 135X160X40MM THK, 1 NOS/SET D)PKG. SHEET VII DET NO.4 SIZE 410X160X25MM THK, 1 NOS/SET

CORRUGATED SHEET ABC SIZE

CORRUGATED CARD BOARD SHEET EACH SET CONSIST OF A) PACKING SHEET I HEMRL/ED/DRG NO.. 001 DETL NO 1 SIZE 600X225X32.5MM THICK, 18 NOS ./SET B)PACKING SHEET II DETL NO.2 SIZE 590X 235X42.5MM THICK, 18 NOS. /SET C) PKG. SHEET III DETL NO. 3 SIZE 235X140X12 MM THICK 27 NOS. /SET

CORRUGATED CARD BOARD SHEET EACH SET CONSIST OF A) PACKING SHEET I HEMRL/ED/DRG NO.. 001 DETL NO 1 SIZE 600X225X32.5MM THICK, 18 NOS ./SET B)PACKING SHEET II DETL NO.2 SIZE 590X 235X42.5MM THICK, 18 NOS. /SET C) PKG. SHEET III DETL NO. 3 SIZE 235X140

DRG. NO. ARDE/1953 DET NO.1 (ARDE 1953 DET NO.1,ISV 376A,ISV-1149,ISV-1144,ISV-1148,ISV-1145,ISV-1146

DRG. NO. ARDE/1953 DET NO.1 (ARDE 1953 DET NO.1,ISV 376A,ISV-1149,ISV-1144,ISV-1148,ISV-1145,ISV-1146

• MSME

• DRG. NO. ARDE/1953 DET NO.1 (ARDE 1953 DET NO.1,ISV 376A,ISV-1149,ISV-1144,ISV-1148,ISV-1145,ISV-1146

CLOTH COTTON DOSUTI BL 36 INCHES WIDE AS PER SPECN.NO. IS:179-2009 (Reaffirmed 2018)

CLOTH COTTON DOSUTI BL 36 INCHES WIDE AS PER SPECN.NO. IS:179-2009 (Reaffirmed 2018)

• MSME

• CLOTH COTTON DOSUTI BL 36 INCHES WIDE AS PER SPECN.NO. IS:179-2009 (Reaffirmed 2018)

SCLOTH CHINA SHEETING NO.1 GREY 36 INCHES WIDE (91.5 CMS) AS PER B.F. SPECN. NO. 1.10 DTD. 28.08.82,AMENDED ONDTD. 11.11. 2013.(EXTRACT ATTACHED).

CLOTH CHINA SHEETING NO.1 GREY 36 INCHES WIDE (91.5 CMS) AS PER B.F. SPECN. NO. 1.10 DTD. 28.08.82,AMENDED ONDTD. 11.11. 2013.(EXTRACT ATTACHED).

• MSME

• CLOTH CHINA SHEETING NO.1 GREY 36 INCHES WIDE (91.5 CMS) AS PER B.F. SPECN. NO. 1.10 DTD. 28.08.82,AMENDED ONDTD. 11.11. 2013.(EXTRACT ATTACHED).

CLOTH COTTON CAMBRIC WHITE 45" WIDE (115 CM) AS PER B.F. SPECIFICATION NO. 1.6 DATED 30-4-79. AMENDED ON 15.05.2004.

CLOTH COTTON CAMBRIC WHITE 45" WIDE (115 CM) AS PER B.F. SPECIFICATION NO. 1.6 DATED 30-4-79. AMENDED ON 15.05.2004.

• MSME

• CLOTH COTTON CAMBRIC WHITE 45" WIDE (115 CM) AS PER B.F. SPECIFICATION NO. 1.6 DATED 30-4-79. AMENDED ON 15.05.2004.

CLOTH ACRYLIC RAYON GRADE "B" TO SPECN IND/ME/973(A)2016 DC 6009-ME DT.03.02.2017. WIDTH NOT LESS THAN 1 MTR.

CLOTH ACRYLIC RAYON GRADE "B" TO SPECN IND/ME/973(A)2016 DC 6009-ME DT.03.02.2017. WIDTH NOT LESS THAN 1 MTR.

• MSME

• CLOTH ACRYLIC RAYON GRADE "B" TO SPECN IND/ME/973(A)2016 DC 6009-ME DT.03.02.2017. WIDTH NOT LESS THAN 1 MTR.

CLOTH ACRYLIC RAYON WHITE TO SPECIFICATION IND/ME/973(A) 2016 GRADE A DC NO. 6009 ME DATED 03.02.2017. WIDTH NOT LESS THAN 1.22 METRE.

CLOTH ACRYLIC RAYON WHITE TO SPECIFICATION IND/ME/973(A) 2016 GRADE A DC NO. 6009 ME DATED 03.02.2017. WIDTH NOT LESS THAN 1.22 METRE.

• MSME

• CLOTH ACRYLIC RAYON WHITE TO SPECIFICATION IND/ME/973(A) 2016 GRADE A DC NO. 6009 ME DATED 03.02.2017. WIDTH NOT LESS THAN 1.22 METRE.

AS PER DRG NO. CI(A)635595 & CQA(A) 6391044

AS PER DRG NO. CI(A)635595 & CQA(A) 6391044

• MSME

• AS PER DRG NO. CI(A)635595 & CQA(A) 6391044

CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).

CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).

• MSME

• CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).

CARTG SA 5 POINT 56 MM BALL

CARTG. SA 5.56 MM BALL MK-I TO CQA (A) DRG NO. IQV 45 GF

CARTG. SA 5.56 MM BALL MK-I TO CQA (A) DRG NO. IQV 45 GF

DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.

DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.

• MSME

• DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.

CARBON BLACK (MONARCH-1300) SPECIFICATION JSS 6810-81-2010 (REV.NO.3)

CARBON BLACK (MONARCH-1300) SPECIFICATION JSS 6810-81-2010 (REV.NO.3)

• MSME

• CARBON BLACK (MONARCH-1300) SPECIFICATION JSS 6810-81-2010 (REV.NO.3)

CARBON BLACK TYPE II (PRINTEX 300) SPECN. NO. JSS 6810-081 : 2016, REV.NO.3.

CARBON BLACK TYPE II (PRINTEX 300) SPECN. NO. JSS 6810-081 : 2016, REV.NO.3.

• MSME

• CARBON BLACK TYPE II (PRINTEX 300) SPECN. NO. JSS 6810-081 : 2016, REV.NO.3.

ACTIVATED CARBON POWDERED TYPE-3 CONFORMING TO IS SPECN.NO IS 8366-1989.Reaffirmed 2016(FIRST REVISION ).

ACTIVATED CARBON POWDERED TYPE-3 CONFORMING TO IS SPECN.NO IS 8366-1989.Reaffirmed 2016(FIRST REVISION ).

• MSME

• ACTIVATED CARBON POWDERED TYPE-3 CONFORMING TO IS SPECN.NO IS 8366-1989.Reaffirmed 2016(FIRST REVISION ).

Steel to specn. IS 1570-13 S-25 or 11 S25 of IS:1570-1979 size 85 mm (+/-1.30) dia in standard length (center plug Arm-1099 C4 Item No. 17) as per Drg. No. SK-9758

Steel to specn. IS 1570-13 S-25 or 11 S25 of IS:1570-1979 size 85 mm (+/-1.30) dia in standard length (center plug Arm-1099 C4 Item No. 17) as per Drg. No. SK-9758

SK-9758

SPCN: JSS-6810-125-2014, REVISION NO 3.

SPCN: JSS-6810-125-2014, REVISION NO 3.

• MSME

• SPCN: JSS-6810-125-2014, REVISION NO 3.

CANDELILLA WAX AS PER SPECN.JSS-NO.9160-08:2016 (REV NO.2).

CANDELILLA WAX AS PER SPECN.JSS-NO.9160-08:2016 (REV NO.2). )

• MSME

• CANDELILLA WAX AS PER SPECN.JSS-NO.9160-08:2016 (REV NO.2). )

IND/ ME/ 458 DC - 3754 ME Dtd. 12/12/ 2002

IND/ ME/ 458 DC - 3754 ME Dtd. 12/12/ 2002

• MSME

• IND/ ME/ 458 DC - 3754 ME Dtd. 12/12/ 2002

CALCIUM CARBONATE FOR PROPELLANT AS PER IS: 7633-1982 REAFFIRMED 2016 GADE-2 CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD.

CALCIUM CARBONATE FOR PROPELLANT AS PER IS: 7633-1982 REAFFIRMED 2016 GADE-2 CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD.

• MSME

• CALCIUM CARBONATE FOR PROPELLANT AS PER IS: 7633-1982 REAFFIRMED 2016 GADE-2 CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD.

BOX WOOD NO.PZ-1 TO DRG. NO. ARDE 1953 SHEET NO. 1,2&3 AND ARDE-1953, DET NO.4 .(OFBA/RK/504,505,506,& 507) RESPECTIVELY

BOX WOOD NO.PZ-1 TO DRG. NO. ARDE 1953 SHEET NO. 1,2&3 AND ARDE-1953, DET NO.4 .(OFBA/RK/504,505,506,& 507) RESPECTIVELY

DRG. NO. ARDE 1953 SHEET NO. 1,2&3 AND ARDE-1953, DET NO.4 .(OFBA/RK/504,505,506,& 507) RESPECTIVELY

BOX PETN/RDX 1A -L WOOD FOR PACKING PETN/RDX AS PER DRAWING NO.IND/ME/59 DC NO.3604-ME DT.13-12-99.

BOX PETN/RDX 1A -L WOOD FOR PACKING PETN/RDX AS PER DRAWING NO.IND/ME/59 DC NO.3604-ME DT.13-12-99.

DRG. NO. IND/ME/59 DC NO. 3604-ME DTD. 13/12/1999

• MSME

• BOX PETN/RDX 1A -L WOOD FOR PACKING PETN/RDX AS PER DRAWING NO.IND/ME/59 DC NO.3604-ME DT.13-12-99.

BOX G 70 STEEL

AMMUNITION CONTAINER BOX, BOX G-70 MK-I/LA DRG . PT. NO. S.V. 68-A, DC 37270 -A, SPEC NO. IA 1169(N) DC 35576-A AIDE MEMOIRE P/11 NOTE- RUST PROOFING & PAINTING AS PER DRG. WITH OLIVE GREEN COLOUR ISC-220 OF IS-5-1994 WITH AMENDMENT.

DRG . PT. NO. S.V. 68-A, DC 37270 -A, SPEC NO. IA 1169(N) DC 35576-A AIDE MEMOIRE P/11 NOTE- RUST PROOFING & PAINTING AS PER DRG. WITH OLIVE GREEN COLOUR ISC-220 OF IS-5-1994 WITH AMENDMENT.

FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A

FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A

OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A