CERAMIC FIBER ROPE 6 MM DIA BRAIDED, REINFORCED WITH FIBRE GLASS.CHEMICAL COMPOSITION:Al2O3:40-48%,SiO2:52-56%,Fe2O3: 2% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-6002% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-600 KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C.WILL BE USED AS SEALING FOR LIQUID STEEL
Specification
CERAMIC FIBER ROPE 6 MM DIA BRAIDED, REINFORCED WITH FIBRE GLASS.CHEMICAL COMPOSITION:Al2O3:40-48%,SiO2:52-56%,Fe2O3: 2% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-6002% MAX. LOI<18%, MOISTURE CONTENT<2%,BULK DENSITY:500-600 KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C KG/M3.WORKING TEMP.1260 DEG. C. & MELTING POINT 1750 DEG.C.WILL BE USED AS SEALING FOR LIQUID STEEL
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
19
1350
Kilogram
40724
SAF/MMD/OTE/16-17/IIC
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
PIVOT FEED LINKTO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02(ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G),
Specification
PIVOT FEED LINKTO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02(ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G),
LINK AS PER MSF SK NO.-HT/85 R2 OF NICHROME STEEL OF CHEMICAL COMPOSITION: C=0.15-0.25%, Si=1.5-1.8%, Mn=1.0-2.0%, Ni=50-60%, Cr=10.0-15.0%, S&P=0.35% EACH.
Specification
LINK AS PER MSF SK NO.-HT/85 R2 OF NICHROME STEEL OF CHEMICAL COMPOSITION: C=0.15-0.25%, Si=1.5-1.8%, Mn=1.0-2.0%, Ni=50-60%, Cr=10.0-15.0%, S&P=0.35% EACH.
STEEL BLANKS TO SIZE 125 MM X 125MM X 3.15 (+/- 0.05) MM THICK: STEEL SPECIFICATION:- IS:513/1994 GRADE DD (DEEP DRAWN QUALITY) : WITH BEST SURFACE FINISH CONDITION.
Specification
STEEL BLANKS TO SIZE 125 MM X 125MM X 3.15 (+/- 0.05) MM THICK: STEEL SPECIFICATION:- IS:513/1994 GRADE DD (DEEP DRAWN QUALITY) : WITH BEST SURFACE FINISH CONDITION.
"ELECTRO CHEMICAL ZINC PLATING FOLLOWED BY CHROMOTISING FOR SARATH/AK630 OF STAGE COMPONENT AS PER DRG.NO.- NCC/416
OTHER DETAILS FOR WORKS AND INSPECTION.
THE SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED. "
Specification
"ELECTRO CHEMICAL ZINC PLATING FOLLOWED BY CHROMOTISING FOR SARATH/AK630 OF STAGE COMPONENT AS PER DRG.NO.- NCC/416
OTHER DETAILS FOR WORKS AND INSPECTION.
THE SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED. "
LIME STONE TO SPECN. I.S.4140/1978 GRADE I;LUMP SIZE:BETWEEN 2" TO 6".IT IS ESSENTIAL THAT THE LIME STONE SHOULD BE FREE FROM MICACIOUS MATTER.THE FIRM HAS TO PAY CESS TO THE EXTENT OF MATERIAL SUPPLIED @ Rs.1.00 PER MT DIRECTLY TO THE LABOUR WELLFARE COMMISSIONER UNDER INTIMATION TO METAL&STEELFACTORY.
Specification
LIME STONE TO SPECN. I.S.4140/1978 GRADE I;LUMP SIZE:BETWEEN 2" TO 6".IT IS ESSENTIAL THAT THE LIME STONE SHOULD BE FREE FROM MICACIOUS MATTER.THE FIRM HAS TO PAY CESS TO THE EXTENT OF MATERIAL SUPPLIED @ Rs.1.00 PER MT DIRECTLY TO THE LABOUR WELLFARE COMMISSIONER UNDER INTIMATION TO METAL&STEELFACTORY.
FLOUROSPAR FOR ESR WITH CHEM. COMP:CaF2: 95% MIN,SiO2:2.0% MAX,CaCO3: 1.0% MAX,S:0.1% MAX,MIXED OXIED:1.5% MAX,P2O5: 0.02%MAX,Pb:TRACE, MOISTURE:0.1%, MAX.Fe2O3 SHOULD NOT BE MORE THAN 01 %, (GRAIN SIZE:POWDER FORM,02 MM MAX) PACKING : 50 KG AIR TIGHT HDPE BAG.
Specification
FLOUROSPAR FOR ESR WITH CHEM. COMP:CaF2: 95% MIN,SiO2:2.0% MAX,CaCO3: 1.0% MAX,S:0.1% MAX,MIXED OXIED:1.5% MAX,P2O5: 0.02%MAX,Pb:TRACE, MOISTURE:0.1%, MAX.Fe2O3 SHOULD NOT BE MORE THAN 01 %, (GRAIN SIZE:POWDER FORM,02 MM MAX) PACKING : 50 KG AIR TIGHT HDPE BAG.
FERRO SILICON TO SPECN. IS:1110-1990. GRADE Fe Si 73 A 115.CHEM.COMP.- Si%: 70-75,C%:0.15 Max;S%:0.050 Max;P%:0.050Max;Al%:1.50 Max. PARTICLE SIZE: 40-150 MM IN THE FORM OF LUMP,OTHER DETAILS AS PER SPECIFICATION.SUPPLY SHOULD ACCOMPANY WITH A CERTIFICATE FROM NABL ACCREDITED LABORATARY.
Specification
FERRO SILICON TO SPECN. IS:1110-1990. GRADE Fe Si 73 A 115.CHEM.COMP.- Si%: 70-75,C%:0.15 Max;S%:0.050 Max;P%:0.050Max;Al%:1.50 Max. PARTICLE SIZE: 40-150 MM IN THE FORM OF LUMP,OTHER DETAILS AS PER SPECIFICATION.SUPPLY SHOULD ACCOMPANY WITH A CERTIFICATE FROM NABL ACCREDITED LABORATARY.
S.G.IRON INGOT MOULD TO SIZE 23''X2100 MM AS PER DRG. NO-OH /1012/152 R1.MATERIAL SPECN:S.G.IRON IS:1865,GRADE:400/18.FIRM SHOULD SUBMIT T.C.FROM NABL ACCREDITED/GOVT.APPROVEDLAB FOR BASIC MATERIAL & MECHANICAL PROPERTIES.
Specification
S.G.IRON INGOT MOULD TO SIZE 23''X2100 MM AS PER DRG. NO-OH /1012/152 R1.MATERIAL SPECN:S.G.IRON IS:1865,GRADE:400/18.FIRM SHOULD SUBMIT T.C.FROM NABL ACCREDITED/GOVT.APPROVEDLAB FOR BASIC MATERIAL & MECHANICAL PROPERTIES.
SOAP FLAKE SPECIAL FOR SOPENIFICATION OF STEEL FOR COLD DRAWING OPERATION OF STEEL CARTRIDGE CASES.AS PER I.S SPECN.10513-1983 TABLE 1 CLAUSES 4.4, 8.1 & 8.3 TYPE- 1.
Specification
SOAP FLAKE SPECIAL FOR SOPENIFICATION OF STEEL FOR COLD DRAWING OPERATION OF STEEL CARTRIDGE CASES.AS PER I.S SPECN.10513-1983 TABLE 1 CLAUSES 4.4, 8.1 & 8.3 TYPE- 1.
SAPONIFICATION FOR STEEL CARTG. CASE. BATH COCENTRATION 0.5-3.0%(W/V), DIP TIME 3-5 MINS AT TEMP 70-90 DEG.C MAIN INGREDIENT IS OCTADECANOIC ACID SODIUM SLT(CAS: 822-16-2)
Specification
SAPONIFICATION FOR STEEL CARTG. CASE. BATH COCENTRATION 0.5-3.0%(W/V), DIP TIME 3-5 MINS AT TEMP 70-90 DEG.C MAIN INGREDIENT IS OCTADECANOIC ACID SODIUM SLT(CAS: 822-16-2)
SPRAY DEGREASING CHEMICAL FOR STEEL CARTG. CASE WITH SPECN. AS FOLLOW: BATH CONCENTRATION 3-5%(W/V) POINT TITRATION 45-65 MLS AND CONTACT TIME 3-5 MIN WITH TEMP 70-80 DEG.C. MAIN INGREDIENT ARE CAUSTIC SODA(CAS:1310-73-2) AND SODA ASH (CAS:497-19-8)
Specification
SPRAY DEGREASING CHEMICAL FOR STEEL CARTG. CASE WITH SPECN. AS FOLLOW: BATH CONCENTRATION 3-5%(W/V) POINT TITRATION 45-65 MLS AND CONTACT TIME 3-5 MIN WITH TEMP 70-80 DEG.C. MAIN INGREDIENT ARE CAUSTIC SODA(CAS:1310-73-2) AND SODA ASH (CAS:497-19-8)
DERUSTING CHEMICAL HAVING BATH COCENTRATION 30-35%(V/V), ACID TITRATION SHOULD BE 30 TO 35 MLS AND DIP TIME 20-30 MIN AT TEMP 60-70 DEG.C. MAIN INGREDIENT ARE PHOSPHORIC ACID(CAS: 7664-38-2), SULPHURIC ACID(CAS:7664:93-9) AND SURFACTANT IN HDPE JARRYCAN.
Specification
DERUSTING CHEMICAL HAVING BATH COCENTRATION 30-35%(V/V), ACID TITRATION SHOULD BE 30 TO 35 MLS AND DIP TIME 20-30 MIN AT TEMP 60-70 DEG.C. MAIN INGREDIENT ARE PHOSPHORIC ACID(CAS: 7664-38-2), SULPHURIC ACID(CAS:7664:93-9) AND SURFACTANT IN HDPE JARRYCAN.
PHOSPHATING CHEMICAL HAVING BATH COCENTRATION 2.5-3%(V/V), ACID TITRATION SHOULD BE 19 TO 21 MLS AND DIP POINT 10 TO 15 (MIN) AT TEMP 70-75 DEG.C. INGREDIENT ARE ZINC OXIDE(CAS:1314-13-2), PHOSPHORIC ACID(CAS:7664-38-2) & NITRIC ACID(CAS:7697-37-2) IN HDPE JARRYCAN
Specification
PHOSPHATING CHEMICAL HAVING BATH COCENTRATION 2.5-3%(V/V), ACID TITRATION SHOULD BE 19 TO 21 MLS AND DIP POINT 10 TO 15 (MIN) AT TEMP 70-75 DEG.C. INGREDIENT ARE ZINC OXIDE(CAS:1314-13-2), PHOSPHORIC ACID(CAS:7664-38-2) & NITRIC ACID(CAS:7697-37-2) IN HDPE JARRYCAN
PHOSPHATING CHEMICAL FOR STEEL ITEMS WITH SPECN.AS FOLLOWS: BATH CONC.% 5 TO 10,TOTAL ACID TITRATION/BATH POINT 25 TO 40 IMMERSION TIME:15 TO 20 MINS.AT 85 TO 90 DEG.C BATH,COATING WT.: 800 TO 1000 Mg/Sq.Ft.,Sp.Gr.1.4TO1.44.COLOURLESS,FREE FM.VISIBLE IMPURITIES ETC.Zn% 9.6 TO 10.6,P2O5% 16.3 TO 17.7
Specification
PHOSPHATING CHEMICAL FOR STEEL ITEMS WITH SPECN.AS FOLLOWS: BATH CONC.% 5 TO 10,TOTAL ACID TITRATION/BATH POINT 25 TO 40 IMMERSION TIME:15 TO 20 MINS.AT 85 TO 90 DEG.C BATH,COATING WT.: 800 TO 1000 Mg/Sq.Ft.,Sp.Gr.1.4TO1.44.COLOURLESS,FREE FM.VISIBLE IMPURITIES ETC.Zn% 9.6 TO 10.6,P2O5% 16.3 TO 17.7
"M.S. STARTER PLATE SIZE - 20 MM X 1000 MM X 1200 MM AS PER MSF DRG NO - ESR/1000/03 . FULLY MACHINED AS PER DRAWING AND
FITTED WITH BOSS -03 NOS IN EACH PLATE . "
Specification
"M.S. STARTER PLATE SIZE - 20 MM X 1000 MM X 1200 MM AS PER MSF DRG NO - ESR/1000/03 . FULLY MACHINED AS PER DRAWING AND
FITTED WITH BOSS -03 NOS IN EACH PLATE . "
Drawing no.
MSF DRG NO - ESR/1000/03
Manufacturing Technology
Testing / Inspection Facility
20
250
Number
40757
SAF/MMD/OTE/16-17/IIA
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
STEEL SHEET 0.9MM (20SWG) X 1000 X 1500 MM,STA 5V2,V2A,V2B, OR IS:1570 (PART-2/SEC-1)- 1979, 15C4 OR BS:1449 (PART 3A) 1964, GD HS-12 FOR FLY OFF LEVER AS PER DRG.NO.NAD 7606/4
Specification
STEEL SHEET 0.9MM (20SWG) X 1000 X 1500 MM,STA 5V2,V2A,V2B, OR IS:1570 (PART-2/SEC-1)- 1979, 15C4 OR BS:1449 (PART 3A) 1964, GD HS-12 FOR FLY OFF LEVER AS PER DRG.NO.NAD 7606/4
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
01
1900
Kilogram
40758
SAF/MMD/OTE/16-17/IIB
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573RNOTE: REVOLVER CLIP COVER OF BUFF BURNISH(HARNESS LEATHER) DRUM DYED AS PER IS:580COLOUR:BLACK/BROWN/BURGANDI
Specification
CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573RNOTE: REVOLVER CLIP COVER OF BUFF BURNISH(HARNESS LEATHER) DRUM DYED AS PER IS:580COLOUR:BLACK/BROWN/BURGANDI
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2.,
Specification
STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM , STEELSTA 5 V2B OR IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD7606/2.,
UPGRADATION OF LOCAL AREA NETWORK (LAN) GIGA NETWORK UPGRADATION OF LOCAL AREA NETWORK (LAN) GIGA THROUGH LAN SWITCHES AND FIBER & UTP STRUCTURAL CABLING.
Specification
TERMS & CONDITIONS AND REQUIREMENT OF HARDWARE & DRAWING AS PER ATTACHED ANNEXURE
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
1522199068
1
Whole job
40761
110MMETT17000818 (TE NO.110170003)
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
1) Chemical & Mechanical properties as per std. given drawing
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.
