MIL Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: [email protected] with a copy to the OFB mail id : [email protected]

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

32087

OPF/ADVANCE VR/EOI/JANUARY-18/FABRIC

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity
Net Fabric Polyester 76 gsm 20 kgf BS Description NET FABRIC POLYESTER 76 GMS 20 KGF BS Specification DRG.NO:-ADRDE/QMS/TDTM/F/2009/03, dt.16-02-09 For Width 120 cms +2 -0 cm excluding selvedge. ADRDE_QMS_TDTM_F_2009_03.pdf Drawing no. Manufacturing Technology As per Specification/Drawing ADRDE_QMS_TDTM_F_2009_03.pdf Testing / Inspection Facility As per Specification/Drawing	2110069084	22063 Metre
DUCK NYLON 230g 91.4cm OG Description DUCK NYLON 230g 91.4cm OG Specification SPECIFICATION NO. : ADRDE/SECN/1984/23(a). Drawing no. Manufacturing Technology Testing / Inspection Facility	2101138892	17467 Metre
FABRIC NYLON 370 gm. AIR TEXTURE,DISRUPTIVE PRINTED,PU COATED INSIDE AS PER PARTICULARS Description FABRIC NYLON 370 gm. AIR TEXTURE,DISRUPTIVE PRINTED,PU COATED INSIDE AS PER PARTICULARS Specification SPECN-ADRDE/specn/75 & SHADE AS PER SAMPLE RECEIVED FROM ADRDE VIDE LETTER NO.ADRDE/QMS/PG/PAS/CFF/319/P dtd.06-06-12 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221226	10484 Metre
FABRIC COTTON CW 310g OG 91.4 CM. Description FABRIC COTTON CW 310g OG 91.4 CM. Specification JSS: 8305-05 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101211938	7261 Metre
FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS Description FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS SPECN NO ADRDE/SPECN/1983/14-OPF KANPUR Specification SPECN NO ADRDE/SPECN/1983/14 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221979	234295 Metre
FABRIC NYLON LT WT 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 AS PER IS SPECN NO IS 5 1994 122 CM WIDTH Description FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH Specification SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2 Read-200 g/cm2 Drawing no. Manufacturing Technology As Per Specification/Drawing IS_4726-1984.pdf Testing / Inspection Facility As Per Specification/Drawing	2101221981	259689 Metre
FABRIC COTTON 375 GMS. OG WATER REPELLANT 135 CM WIDTH (FOR AERONAUTICAL PURPOSE) Description FABRIC COTTON 375 GMS. OG WATER REPELLANT 135 CM WIDTH (FOR AERONAUTICAL PURPOSE) specification Specification Specn. No. :- IS:2422-1985.Dye fastness to light may be obtained by Carbon Arc Method also in case Xenon Arc is not available. (a) In appearance shade finish and all other respects not defined in this specification,the material shall conform to the corresponding to sealed pattern held in the custody of the Controller, CQA(T&C), Kanpur. (b) Sampling Plan as per Annexure I attached. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221228	26094 Metre
BLENDED FABRIC POLYESTER & COTTON(67:33) Description BLENDED FABRIC POLYESTER & COTTON (67:33) 93+2-0 CM WIDTH Specification TYPE 2 OF IS 2970-1987 (RE AFFIRMED 2004) FIRST REVISION EXCEPT TECHNICAL PARTICULARS AS PER ANNEXURE ENCLOSED. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221310	2063317 Metre

32088

HAPP/AVR/134MMEPQ18000021/2017-18/C2/B44

Heavy Alloys Penetrator Project

Trichy
Trichy
Trichy
Trichy, Tamil Nadu
620025

Name	Code	Quantity	Approx Value	Select
SOCKET FOR ADAPTOR ASSY Description SOCKET AS PER DRAWING Specification STEEL MACHINED socket.pdf Drawing no. AS PER NASK DRAWING Manufacturing Technology Testing / Inspection Facility	12	300 Number

32089

HAPP/AVR/134MMEPQ18000021/2017-18/C2/screws

Heavy Alloys Penetrator Project

Trichy
Trichy
Trichy
Trichy, Tamil Nadu
620025

Name	Code	Quantity	Approx Value	Select
SCREW M5 Description SCREW M5 AS PER NASK DRAWING AND M.I. Specification IS:2062-92 GRADE Fe 410wa screw_M5_NASK1067.pdf Drawing no. NASK 1067 screw.pdf Manufacturing Technology Testing / Inspection Facility	12	2500 Number

32090

20170566/Pv/1110/EOT/F (T ID 10MMETT18002154)

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
LONG CLOTH COTTON WHITE BLEACHED 91 CMS Description IS:187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986 Specification IS:187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986 Drawing no. Manufacturing Technology Testing / Inspection Facility	21	83621 Metre

32091

MPV10

Vehicle Factory Jabalpur

The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009

Name	Code	Quantity	Approx Value	Select
Air piping modular hose loose kit for MPV consisting of 34 (28+06) types of pipes as per drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 N/A Description Air piping modular hose loose kit for MPV consisting of 34 (28+06) types of pipes as per drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 N/A Specification Air piping modular hose loose kit for MPV consisting of 34 (28+06) types of pipes as per drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 N/A Drawing no. Aip_piping_consisting_of_34_pipes_-ilovepdf-compressed.pdf Manufacturing Technology Testing / Inspection Facility	90	250 Set

32092

128MMETT18001068

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
SUPPLY OF FRONT SIGHT BLOCK AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL Description SUPPLY OF FRONT SIGHT BLOCK AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL Specification AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL Drawing no. K 1207 img05089.pdf Manufacturing Technology Testing / Inspection Facility	70	1532 Number

32093

176060

Ordnance Factory Bhandara

The General Manager,
Bhandara
Bhandara
Maharashtra
441906

Name	Code	Quantity	Approx Value	Select
ETHYL CELLULOSE HIGH VISCOCITY TYPE N-200 Description ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES. Specification CETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES. Drawing no. Manufacturing Technology Testing / Inspection Facility	10	450 Kilogram

32094

HAPP/AVR/134MMEPQ18000021/2017-18/C2/B5

Heavy Alloys Penetrator Project

Trichy
Trichy
Trichy
Trichy, Tamil Nadu
620025

Name	Code	Quantity	Approx Value	Select
STEEL ROD 220 MM DIA LENGTH 130 MM. Description EN 8 / ASTM 106 GR B Specification EN 8 / ASTM 106 GR B steel_rod_dia_220mm.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	33	12500 Kilogram

32095

HAPP/AVR/134MMEPQ18000021/2017-18/C2/B 02

Heavy Alloys Penetrator Project

Trichy
Trichy
Trichy
Trichy, Tamil Nadu
620025

Name	Code	Quantity	Approx Value	Select
STEEL ROD 220 MM DIA LENGTH 560 MM Description STEEL ROD, 220MM LENGTH 560MM AS PER SPECIFICATION AND M.I Specification AS PER SPECIFICATION ASTM 106 GRADE B s_rod_dia_220mm.pdf Drawing no. NA Manufacturing Technology Testing / Inspection Facility	33	100 Number

32096

HAPP/AVR/134MMEPQ18000021/2017-18/C2/C1

Heavy Alloys Penetrator Project

Trichy
Trichy
Trichy
Trichy, Tamil Nadu
620025

Name	Code	Quantity	Approx Value	Select
FORGING ADAPTOR Description ADAPTOR FORGING AS PER DRAWING AND M.I Specification STEEL GRADE 709M40 Drawing no. O ADF 155 2 010 REV 8 adaptor_forgings.pdf Manufacturing Technology Testing / Inspection Facility	12	5000 Number

32097

HAPP/AVR/134MMEPQ18000021/2017-18/C2/B39

Heavy Alloys Penetrator Project

Trichy
Trichy
Trichy
Trichy, Tamil Nadu
620025

Name	Code	Quantity	Approx Value	Select
HOLDER Description HOLDER AS PER DRAWING AND M.I Specification SHEET METAL COMPONENT b39.pdf Drawing no. NASK 1070 B39.pdf Manufacturing Technology Testing / Inspection Facility	33	300 Number

32098

ORDFYS/CFA/03/17-18/PV DT.03-01-2018

Cordite Factory Arvankadu

The General Manager,
Aravankadu
Aravankadu
Tamil Nadu
643202

Name	Code	Quantity
UNVARNISHED HALLOW PAPER TUBE Description C.F. NO.12.5, DT. 17-01-95, C.F. SKETCH NO. 765, DT. 02-12-88 Specification C.F. NO.12.5, DT. 17-01-95, C.F. SKETCH NO. 765, DT. 02-12-88 26__UNVARNISHED_HOLLOW_PAPER_TUBE.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	25	20305 Number
THREAD SEWING UNBLEACHED Description THREAD COTTON UNBLEACHED Specification THREAD COTTON SEWING BLEACHED UNPROOFED (27 TEX x 9)(COPS OF 1000 ME\TRS JSS:8310-02 2016 REVISION NO.3 DC 5497-ME DT.24-09-2016. 25__THREAD_SEWING_UNBLEACHED.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	21	355 Cops
TAPE COTTON WHITE 1/4 Description TAPE COTTON WHITE 1/4" Specification TAPE COTTON WHITE UN-PROOFED FOR AMMUNITION PURPOSES 6 MM + OR -1.5MM WIDE SPECN:IND/ME/888:2015 DC-5405(ME) DT.01.02.2016 24__TAPE_COTTON_WHITE_14.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	21	187500 Metre
STRONG NITRIC ACID Description IS 264-2005 III REV Specification IS 264-2005 III REV 23__STRONG_NITRIC_ACID.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	10	443000 Kilogram

32099

HAPP/AVR/134MMEPQ18000021/2017-18/C2/B37

Heavy Alloys Penetrator Project

Trichy
Trichy
Trichy
Trichy, Tamil Nadu
620025

Name	Code	Quantity
PLUG Description PLUG AS PER DRAWING AND M.I Specification MOULDED PLASTIC COMPONENT b37.pdf Drawing no. NASK 1063 B_37.pdf Manufacturing Technology Testing / Inspection Facility	33	300 Number
SODA ASH (COMM) Description SODA ASH COMMERCIAL CF SPEC.39 Specification SODA ASH (COMMERCIAL GRADE) AS PER C.F.SPECN.NO.39.0 DT.29-06-2006 (ENCLOSED) 22__SODA_ASH__COMM_.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	10	388500 Kilogram
PAPER WRAPPING WAXED KRAFT Description PAPER WRAPPING WAXED KRAFT AMM Specification PAPER WRAPPING WAXED KRAFT AMMUNITION-1118mm X 182.88 m SPECN:JSS 8135-05:2013 REVISION NO.4 DC 5186(ME) DT:19-03-2014. 19__PAPER_WRAPPING_WAXED_KRAFT.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	14	615 Roll
OLEUM (GRADE1) Description OLEUM GRADE I. 20% Specification OLEUM TECH.GR.I WITH 20% FREE SO3 (MIN) TO SPECN:IS:1089 OF 1986 (2nd REVISION) REAFFIRMED 2015.TO CONFIRM WITH ADDL.REQT FOR EXPLOSIVES INDUSTRY-Cl.3.3 18__OLEUM__GRADEI_.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	10	302500 Kilogram
CASE C-128 MK-13(NEW) Description IA -948 Specification IA -948 17__MK-13_CASES_C-128__SER_.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	65	6480 Number
MINERAL JELLY Description MINERAL JELLY Specification MINERAL JELLY SPECN:JSS.8030-09:2016 REV NO.3) DC NO.5487-ME DT:24.09.2016 16__MINERAL_JELLY.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	10	1000 Kilogram
GRAPHITE DRY SULPHUR FREE Description JSS: 9620-01:2001 (Rev -1) Specification JSS: 9620-01:2001 (Rev -1) 15__GRAPHITE_DRY_SULPHUR_FREE.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	10	220 Kilogram
GLYCERINE FOR NITRATION Description JSS 6810-109-1995 (REV.1) Specification JSS 6810-109-1995 (REV.1) 14__GLYCERINE.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	10	112500 Kilogram
FURNACE FUEL OIL Description IS 1593-1982 Specification IS 1593-1982 13__FURNACE_FUEL_OIL.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	10	2020 Metric tonne(1000kg)

32100

HAPP/AVR/134MMEPQ18000021/2017-18/C2/B36

Heavy Alloys Penetrator Project

Trichy
Trichy
Trichy
Trichy, Tamil Nadu
620025

Name	Code	Quantity
GASKET FOR RGB 60 Description GASKET AS PER DRAWING AND M.I Specification RUBBER COMPONENT b_36.pdf Drawing no. NASK 1071/5 B_36.pdf Manufacturing Technology Testing / Inspection Facility	33	300 Number
DI-N-BUTYL-PHTHALATE (DBP) Description DI-N-BUTYL PHTHALATE Specification PLASTICIZER ESTERS TYPE-I-DI-N-BUTYL PHTHALATE TO SPECN:IS14421-1997(SUPERSEDES IS:3371-1980). REAFFIRMED 2013 12__DI-N-BUTYL-PHTHALATE__DBP_.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	10	5125 Litre
CAMBRIC COTTON DYED & UNDYED Description IS 5088-1982 (REV.1) Specification IS 5088-1982 (REV.1) 11__CAMBRIC_COTTON_UNDYED.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	21	10400 Metre
CC SIGNAL RED 44 Description CAMBRIC COT.RED 1117.6/1143 MM Specification CAMBRIC COTTON DYED SIGNAL RED 1117.6 MM (44") ISC COLOUR CODE 537 OF IS:5-2007 (SIXTH REVISION FOR SIGNAL RED SPECN : IS:5088 OF 1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2007 DC3999-ME DT.08-01-2010 (VARIETY NO.2) 10__CAMBRIC_COTTON_SIGNAL_RED_44.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	21	12140 Metre

32101

107MMEPQ17000364

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity
IMPACT PROTECTION RIGHT TO DRG NO 304052778 DC NO 19311 W DATED 02 03 2013 WITH ACCESSORIES Description IMPACT PROTECTION RIGHT TO DRG. NO 304052778 DC NO-19311-W DATED 02.03.2013 WITH ACCESSORIES I E INCLUDING CLEANING SACHET, STRAP & DOUBLE SIDED ADHESIVE DRG, NO- F- 1303-028990-A Specification AS PER DRAWING Drawing no. 304052778 merged_files.pdf Manufacturing Technology AS PER ATTACHMENT 22-23_PM.pdf Testing / Inspection Facility AS PER ATTACHMENT	71	1500 Number
CC RED 36 Description CAMBRIC COTTON DYED RED 36" Specification CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") (SIXTH REVISION) CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") ISC COLOUR CODE 537 OF IS: 5-2007 (SIXTH REVISION) FOR SIGNAL RED. SPECN:IS:5088 OF 1982(FIRST REVISION)WITH AMENDMENT NO.2 REAFFIRMED 2011 DC3999-ME DT.08-01-2010 (VARIETY NO.2) 9__CAMBRIC_COTTON_RED_36_.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	21	13900 Metre
CC ORANGE Description CAMBRIC COTTON LIGHT ORANGE Specification CAMBRIC COTTON DYED LIGHT ORANGE 915 MM WIDE (ISC No.557 OF IS:5/2007) (SIXTH REVISION) SPECN IS:5088 OF 1982 (FIRST REV) WITH AMENDMENT NO.2 SPECN IS:5088 OF 1982 (FIRST REV) WITH AMENDMENT NO.2 8__CAMBRIC_COTTON_ORANGE.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	21	24160 Metre
CC OLIVE GREEN Description CAMBRIC COTTON OLIVE GREEN 36" Specification CAMBRIC COTTON DYED OLIVE GREEN 915 MM WIDE (36") IS COLOUR CODE 220 OF IS:5-2007 (SIXTH REVISION) FOR OLIVE GREEN SPECIFICATION IS:5088 OF1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2007 DC3999-ME DT.08-01-2010 (VARIETY NO.2). 7__CAMBRIC_COTTON_OLIVE_GREEN.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	21	13220 Metre
CC AZURE BLUE Description CAMBRIC COTTON DYED BLUE. Specification CAMBRIC COTTON DYED AZURE BLUE 44" WIDE ISC NO:104 OF IS:5/2007 FOR AZURE BLUE (SIXTH REVISION) TO SPECN: IS: 5088 OF 1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2011 DC 3999-ME DT.08-01-2010 (VARIETY NO;2) 6__CAMBRIC_COTTON_AZURE_BLUE.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	21	9500 Metre

32102

HAPP/AVR/134MMEPQ18000021/2017-18/C2/B34

Heavy Alloys Penetrator Project

Trichy
Trichy
Trichy
Trichy, Tamil Nadu
620025

Name	Code	Quantity
TEXTOLITE SEALING RING Description TEXTOLITE SEALING RING AS PER DRAWING AND M.I Specification RESIN COMPONENT b_34.pdf Drawing no. NASK 1071/2 textolite_sealing_ring.pdf Manufacturing Technology Testing / Inspection Facility	33	300 Number
CALICO BAGS 40 KG Description BAGS CALICO (40 KG CAPACITY) Specification BAGS CALICO FOR 40 KG M.T PROPELLANTS MADE OUT OF CALICO CLOTH AND AS PER CFA DRG NO.1037 DATED 24.12.2013 SPECN-IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD 2011-FOR CLOTH 5__CALICO_BAGS_40_KG.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	21	11030 Number
CALICO BAGS 20 KG Description BAGS CALICO. Specification CALICO BAG TO CFA SKETCH NO:932. DT.19.9.2001 WITH AMENDMENT NO.2 FOR BAG SPECN.IS-5088-1982 (FIRST REV)WITH AMENDMENT NO.2 OCT 1996 REAFD. 2007- FOR CLOTH 4__CALICO_BAGS_20_KG.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	21	3750 Number
CALCIUM CARBONATE Description CALCIUM CARBONATE TYPE II Specification CALCIUM CARBONATE FOR EXPLOSIVES TYPE II PRECIPITATED MATERIAL RETAINED ON 90 MICRON IS SIEVE - NIL (PERCENT BY MASS) FOR USE IN PROPELLANTS SPECN: IS 7633 - 1982 REAFFIRMED 2016. (FIRST REVISION) AMENDMENT NO. 1 DC 5372-ME DT.28-07-2015 3__CALCIUM_CARBONATE.pdf Drawing no. nil Manufacturing Technology Testing / Inspection Facility	10	1730 Kilogram
BLEACHED COTTON LINTER Description JSS-8035-14-1998(REV.NO.2)DC 3532 -ME DT.13-07-98,VIS.20 TO 30 POISES VARIATION SHOULD BE WITHIN +/- 10 % Specification JSS-8035-14-1998(REV.NO.2)DC 3532 -ME DT.13-07-98,VIS.20 TO 30 POISES VARIATION SHOULD BE WITHIN +/- 10 % 2__BLEACHED_COTTON_LINTER__SER_.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	21	227500 Kilogram
ACETONE Description IS-170-2004 FORTH REV Specification IS-170-2004 FORTH REV ACETONE.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	10	170500 Metric tonne(1000kg)

32103

HAPP/AVR/134MMEPQ18000021/2017-18/C2/B 31

Heavy Alloys Penetrator Project

Trichy
Trichy
Trichy
Trichy, Tamil Nadu
620025

Name	Code	Quantity	Approx Value	Select
BUS BAR FOR RGB 60 Description BUS BAR AS PER DRAWING AND MONITORING INSTRUCTION Specification IS 6603: 1972 GR 07 Cr 18 Ni 9 / STEEL TO IS 513 GR 0 EDD b_31.pdf Drawing no. NASK 1071/8 B31.pdf Manufacturing Technology Testing / Inspection Facility	33	300 Number

32104

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
MAGAZINE BOX AK 630 ASSY 01 Description MAGAZINE BOX AK 630 ASSY. 01 Specification AS PER REQUIRED DRG. Drawing no. MAGAZINE_ALBUM_compressed.pdf Manufacturing Technology AS PER ATTACHMENT 1_PM.pdf Testing / Inspection Facility AS PER ATTACHMENT	72	15 No. Number

32105

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
STEEL ROD DIA 55 MM X L1250 TO SPECN OST 3 98 80 GRADE OF STEEL 30KHRA Description STEEL ROD DIA 55 MM X L1250 TO SPECN. OST 3-98-80 GRADE OF STEEL 30KHRA Specification AS PER SPECIFICATION Drawing no. Manufacturing Technology AS PER ATTACHMENT 1-7.pdf Testing / Inspection Facility AS PER ATTACHMENT	03	500 kg Kilogram

32106

HAPP/AVR/134MMEPQ18000021/2017-18/C2/A4

Heavy Alloys Penetrator Project

Trichy
Trichy
Trichy
Trichy, Tamil Nadu
620025

Name	Code	Quantity	Approx Value	Select
DIAPHRAGM FOR RGB-60 Description AS PER DRAWINGS Specification AS PER DRAWINGS DIAPHRAM_ASSY_ADAPTOR.pdf Drawing no. DIAPHRAM_A_ADAPTOR.pdf Manufacturing Technology Testing / Inspection Facility	12	300 Number

32107

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
REFLECTOR TO DRG. NO. AK-630 111-301A IN FINISHED CONDITION Description REFLECTOR TO DRG. NO. AK-630 111-301A IN FINISHED CONDITION Specification AS PER DRAWING Drawing no. AK-630 111-301A 111-301a.pdf Manufacturing Technology Testing / Inspection Facility	72	30 No. Number

32108

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
AIR MANOMETER MVU-100 (REQD. FOR DRG. NO AK-630M SB02. Description AIR MANOMETER MVU-100 (REQD. FOR DRG. NO AK-630M SB02. Specification AS PER DRG. AND SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	72	15 No Number

32109

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
FABRICATION OF GAS BLOCK TO DRG. NO. AO-18.01.020 SB MAKE; AS PER SPECIFICATION & DRAWING Description FABRICATION OF GAS BLOCK TO DRG. NO. AO-18.01.020 SB MAKE; AS PER SPECIFICATION & DRAWING Specification AS PER DRAWING Drawing no. gas_coupling.pdf Manufacturing Technology Testing / Inspection Facility	91	15 No. Number

32110

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
AIR PRESSURE REGULATOR IL-611-150-70K Description AS PER DRG. AND SPECN Specification AS PER DRG. AND SPECN Drawing no. reducer.pdf Manufacturing Technology Testing / Inspection Facility	72	50 No. Number

32111

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
BUSH TO DRG NO 9 A 621 05 016 Description BUSH TO DRG NO 9-A-621.05.016 Specification AS PER DRAWING Drawing no. 9-A-621.05.016 9-A-621_05_016.pdf Manufacturing Technology as per attachment PM_1.pdf Testing / Inspection Facility as per attachment	72	25 No. Number

32112

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
HARD CHROMIUM PLATING ON BARREL FOR AK-630 GUN TO DRG. NO AO-18.01.018 Description HARD CHROMIUM PLATING ON BARREL FOR AK-630 GUN TO DRG. NO AO-18.01.018 Specification AS PER DRAWING Drawing no. AO-18.01.018 AO-18_01_018.pdf Manufacturing Technology Testing / Inspection Facility	91	50 No. Number

32113

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
MESH TO DRG. NO. AK-630 SB 117-7 IN F/C Description MESH TO DRG. NO. AK-630 SB 117-7 IN F/C Specification AS PER DRAWING Drawing no. AK- 630 SB 117-7 AK-630_117-7_SB.pdf Manufacturing Technology Testing / Inspection Facility	72	20 No. Number

32114

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
BUFFER SPRING TO DRG NO AO 18 00 007 Description BUFFER SPRING TO DRG. NO:AO-18.00.007 Specification BUFFER SPRING TO DRG. NO:AO-18.00.007 Drawing no. AO-18_00_007.pdf Manufacturing Technology AS PER ATTACHMENT PM.pdf Testing / Inspection Facility AS PER ATTACHMENT	72	22 No. Number

32115

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
STEEL BAR 60MM DIA TO SPECIFICATION TU 14 1 1637 76 TO GRADE BAR OF ALLOY KHISK60V14N11 EP131 Description STEEL BAR 60MM DIA TO SPECIFICATION TU-14-1-1637-76 TO GRADE : BAR OF ALLOY KHISK60V14N11 (EP131) Specification AS PER SPECIFICATION Drawing no. Manufacturing Technology AS PER ATTACHMENT 1-7.pdf Testing / Inspection Facility AS PER ATTACHMENT	03	500 kg. Number

32116

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
GAS BLOCK TO DRG. NO. AO-18.01.020 IN F/C Description GAS BLOCK TO DRG. NO. AO-18.01.020 IN F/C Specification AS PER DRAWING Drawing no. gas_coupling.pdf Manufacturing Technology Testing / Inspection Facility	72	15 No. Number

32117

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
CONTACTOR ASSY. TO DRG.NO.9-A-621.08.000 SB IN F/C Description CONTACTOR ASSY. TO DRG.NO.9-A-621.08.000 SB IN F/C Specification CONTACTOR ASSY. TO DRG.NO.9-A-621.08.000 SB IN F/C Drawing no. contactor_album.pdf Manufacturing Technology Testing / Inspection Facility	72	15 No. Number

32118

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
Fabrication of Shutter ring to Drg.no.A.O.18.01.028 (HEAT TREATMENT OPN. TO FINISH DRG. NO. AO-18.01.028 AND PROCESS SCHEDULE SL. FROM 030 TO END ) OF AO-18 STORE Description Fabrication of Shutter ring to Drg.no.A.O.18.01.028 (HEAT TREATMENT OPN. TO FINISH DRG. NO. AO-18.01.028 AND PROCESS SCHEDULE SL. FROM 030 TO END ) OF AO-18 STORE Specification AS PER DRAWING Drawing no. Drg.no.A.O.18.01.028 AO-18_01_028.pdf Manufacturing Technology Testing / Inspection Facility	91	500 No. Number

32119

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
VALVE TO DRG NO AO18 03 010 IN FINISHED CONDITION Description VALVE TO DRG.NO.A.O.18.03.010 IN FINISHED CONDITION Specification AS PER DRAWING Drawing no. .A.O.18.03.010 AO-18_03_010.pdf Manufacturing Technology as per attachment valve_pm.pdf Testing / Inspection Facility as per attachment	72	50 No. Number

32120

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
Link for AO-18/AK-630 Drg. no.3-AO-18.001. AS PER TECH. SPECN: NO. 3-AO-18.001-TY/NASK-835 (PROV.) Description Link for AO-18/AK-630 Drg. no.3-AO-18.001. AS PER TECH. SPECN: NO. 3-AO-18.001-TY/NASK-835 (PROV.) Specification AS PER DRAWING Drawing no. NASK-835 NASK_835_LINK.pdf Manufacturing Technology Testing / Inspection Facility	72	18000 No. Number

32121

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
HOSE VG (111)-10-31, 5-47-T GOST 18698-79 (REQ. FOR DRG. NO. AK-630 SB 108) IN FINISHED CONDITION (1 NO.= 7.5 MTR) Description HOSE VG (111)-10-31, 5-47-T GOST 18698-79 (REQ. FOR DRG. NO. AK-630 SB 108) IN FINISHED CONDITION (1 NO.= 7.5 MTR) Specification AS PER SPECIFICATION 18698-79.pdf Drawing no. Manufacturing Technology Testing / Inspection Facility	72	15 No. Number

32122

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
FIXTURE FOR CONNECTING STRIP/BAND TO AK 630 YU SB8 Description FIXTURE FOR CONNECTING STRIP/BAND TO AK 630 YU SB8 Specification FIXTURE FOR CONNECTING STRIP/BAND TO AK 630 YU SB8 Drawing no. fixture_for_belt_connecting.pdf Manufacturing Technology Testing / Inspection Facility	72	15 No. Number

32123

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
WINCH TO DRG No AK 630 Yu SB 3 Description WINCH TO DRG.NO.AK-630 Yu SB-3 Specification WINCH TO DRG.NO.AK-630 Yu SB-3 Drawing no. WINCH.pdf Manufacturing Technology as per attachment PM.pdf Testing / Inspection Facility as per attachment	72	15 No. Number

32124

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
HOIST TO DRG. NO. AK-630-YU SB1 SB Description HOIST TO DRG. NO. AK-630-YU SB1 SB Specification HOIST TO DRG. NO. AK-630-YU SB1 SB Drawing no. HOIST_compressed.pdf Manufacturing Technology Testing / Inspection Facility	72	15 No. Number

32125

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
BELT FILLING MACHINE AO.18N.000 Description BELT FILLING MACHINE AO.18N.000 Specification BELT FILLING MACHINE AO.18N.000 Drawing no. AO-18N-000-ALBUM.pdf Manufacturing Technology Testing / Inspection Facility	72	15 No. Number

32126

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
FIXTURE AO 18P 000 Description FIXTURE AO.18P.000 Specification FIXTURE AO.18P.000 Drawing no. AO-18P_000-album-gsf.pdf Manufacturing Technology as per attachment fix_pm.pdf Testing / Inspection Facility as per attachment	72	15 No. Number

32127

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
PLATE TO DRG. NO. AK-630 SB 171/50-71 IN FINISHED CONDITION Description PLATE TO DRG. NO. AK-630 SB 171/50-71 IN FINISHED CONDITION Specification PLATE TO DRG. NO. AK-630 SB 171/50-71 IN FINISHED CONDITION Drawing no. Pages_from_DD_for_article_AK-630(1-61)-2.pdf Manufacturing Technology Testing / Inspection Facility	72	15 No. Number

32128

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
ELECTRIC AIR VALVE 3K 48 REQ FOR DRG NO SB114 IN FINISHED CONDITION Description ELECTRIC AIR VALVE 3K-48 Specification ELECTRIC AIR VALVE 3K-48 (REQ. FOR DRG. NO. SB114) Drawing no. ELEC__VALVE_EK-48_DRAWING.pdf Manufacturing Technology as per attachment electric_air_valve_pm.pdf Testing / Inspection Facility as per attachment	72	50 No. Number

32129

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
MACHINING OF 1 SET OF RACE RING CONSIST OF LOWER RING TO DRG. AK-630 119-1, UPPER RING TO DRG. AK-630 119-2, INTERNAL RING TO DRG. AK-630 119-25 FROM A SET OF FORGINGS CONSISTS OF FORGING OF LOWER RING TO DRG. AK-630 119-1, FORGING OF UPPER RING TO Description MACHINING OF 1 SET OF RACE RING CONSIST OF LOWER RING TO DRG. AK-630 119-1, UPPER RING TO DRG. AK-630 119-2, INTERNAL RING TO DRG. AK-630 119-25 FROM A SET OF FORGINGS CONSISTS OF FORGING OF LOWER RING TO DRG. AK-630 119-1, FORGING OF UPPER RING TO DRG. AK-630 119-2, FORGING OF INTERNAL RING TO DRG. AK-630 119-25. Specification AS PER DRG. & SPECIFICATION Drawing no. race_ring_machining.pdf Manufacturing Technology Testing / Inspection Facility	91	15 No. Number

32130

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF : (A) FORGING OF LOWER RING TO DRG. NO. AK-630 119-1 (B) FORGING OF UPPER RING TO DRG. NO. AK-630 119-2, (C) FORGING OF INTERNAL RING TO DRG. NO. AK-630 119-25. MAT. SPECIFICATION : GRADE X 2CR13 TO Description SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF : (A) FORGING OF LOWER RING TO DRG. NO. AK-630 119-1 (B) FORGING OF UPPER RING TO DRG. NO. AK-630 119-2, (C) FORGING OF INTERNAL RING TO DRG. NO. AK-630 119-25. MAT. SPECIFICATION : GRADE X 2CR13 TO IS 6911-92 (AS PER CQA(MET)). Specification AS PER DRG. & SPECIFICATION Drawing no. set_of_race_ring_forging.pdf Manufacturing Technology Testing / Inspection Facility	72	15 No. Number

32131

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
CASTING OF CRADLE TO DRG. NO . AK-630 101-25 Description CASTING OF CRADLE TO DRG. NO . AK-630 101-25 Specification AS PER DRAWING Drawing no. Ak-630_101-25_(A1)_compressed.pdf Manufacturing Technology Testing / Inspection Facility	72	15 No Number

32132

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
SECTOR RIM ( AK 630 101.26) FORGING TO DR TO SPECN ALLOY A MG6.GOST: 4784-97 Description AS PER DRG. & SPECIFICATION Specification AS PER DRG. & SPECIFICATION Drawing no. forging_of_rim_sector_101-26.pdf Manufacturing Technology Testing / Inspection Facility	72	15 No. Number

32133

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
CASTING OF CARRIAGE TO DRG. NO. AK-630 102-47 Description CASTING OF CARRIAGE TO DRG. NO. AK-630 102-47 Specification AS PER DRAWING Drawing no. Ak-630_102-47(_A1)_compressed.pdf Manufacturing Technology Testing / Inspection Facility	72	15 No. Number

32134

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
BOX FOR GUN MOUNT AK-630 M WITHOUT AO-18. DRG, NO. AK-630M YA SB 200-1 TR & 200-14 TR Description BOX FOR GUN MOUNT AK-630 M WITHOUT AO-18. DRG, NO. AK-630M YA SB 200-1 TR & 200-14 TR Specification AS PER DRG. AND SPECN. Drawing no. box_for_gun_mount.pdf Manufacturing Technology Testing / Inspection Facility	72	15 No Number

32135

107MMEPQ17000363

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
30MM SIX BARREL AUTOMATIC GUN AO-18 AO-18.00.000 Description 30MM SIX BARREL AUTOMATIC GUN AO-18 AO-18.00.000 Specification AS PER DRAWING OR SPECIFICATION Drawing no. AO-18_ASSY__DRG_compressed.pdf Manufacturing Technology Testing / Inspection Facility	72	15 No Number

32136

107MMEPQ17000364

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
STEEL CASTING FOR ARC TO STONE DRG. NO. 3014740 Description STEEL CASTING FOR ARC TO STONE DRG. NO. 301474 Specification AS PER DRAWING Drawing no. 3014740_updated_as_on_16_05_2016.pdf Manufacturing Technology Testing / Inspection Facility	70	24 Number

Proceed