FABRIC NYLON 66, 93g U/D 120 Cm.

ADRDE/SPECN/2000/53(b)

FABRIC NY. 109GM ORANGE 120 CM WIDTH

SPECIFICATION NO.:ADRDE/SPECN/1985/28(C) SHADENO. 592 AS PER BS: 381-1964 AS.

FABRIC COTTON MERCERISED 140 G U/D 136_+4CM.

SPECN. NO. IS:514.GRADE -1.

FABRIC NYLON LOW POROSITY 52 GM,RIP STOP WEAVE ORANGE 94 CM.

SECIFICATION NO. : ADRDE/SPECN/1983/14.

FABRIC NYLON LT. WT. 37g RIP STOP WEAVE OLIVE DRAB. SHADE NO 298 (AS PER SPECN. NO IS:5-1994), 94 CM. WIDTH

SPECIFICATION NO. IS:4726 - 1984.

NETTING NYLON 3" SQUARE MESH

SPECN. :AS PER PARTICULARS Width: 37.5 cm (15 Inch). B.L. : 20 kg(MIN). Mesh Size : 7.5cm x7.5cm (3"SQUARE). Strength at joint : 30 kg(Min). Denier : 840. Weight/Mtr.:- Upto 25 grams.

NET FABRIC POLYESTER 76 GMS 20 KGF BS

DRG.NO:-ADRDE/QMS/TDTM/F/2009/03, dt.16-02-09 For Width 120 cms +2 -0 cm excluding selvedge.

• As per Specification/Drawing

• As per Specification/Drawing

DUCK NYLON 230g 91.4cm OG

SPECIFICATION NO. : ADRDE/SECN/1984/23(a).

FABRIC NYLON 370 gm. AIR TEXTURE,DISRUPTIVE PRINTED,PU COATED INSIDE AS PER PARTICULARS

SPECN-ADRDE/specn/75 & SHADE AS PER SAMPLE RECEIVED FROM ADRDE VIDE LETTER NO.ADRDE/QMS/PG/PAS/CFF/319/P dtd.06-06-12

FABRIC COTTON CW 310g OG 91.4 CM.

JSS: 8305-05

FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS SPECN NO ADRDE/SPECN/1983/14-OPF KANPUR

SPECN NO ADRDE/SPECN/1983/14

FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH

SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2 Read-200 g/cm2

• As Per Specification/Drawing

• As Per Specification/Drawing

FABRIC COTTON 375 GMS. OG WATER REPELLANT 135 CM WIDTH (FOR AERONAUTICAL PURPOSE) specification

Specn. No. :- IS:2422-1985.Dye fastness to light may be obtained by Carbon Arc Method also in case Xenon Arc is not available. (a) In appearance shade finish and all other respects not defined in this specification,the material shall conform to the corresponding to sealed pattern held in the custody of the Controller, CQA(T&C), Kanpur. (b) Sampling Plan as per Annexure I attached.

BLENDED FABRIC POLYESTER & COTTON (67:33) 93+2-0 CM WIDTH

TYPE 2 OF IS 2970-1987 (RE AFFIRMED 2004) FIRST REVISION EXCEPT TECHNICAL PARTICULARS AS PER ANNEXURE ENCLOSED.

SOCKET AS PER DRAWING

STEEL MACHINED

AS PER NASK DRAWING

SCREW M5 AS PER NASK DRAWING AND M.I.

IS:2062-92 GRADE Fe 410wa

NASK 1067

IS:187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986

IS:187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986

Air piping modular hose loose kit for MPV consisting of 34 (28+06) types of pipes as per drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 N/A

Air piping modular hose loose kit for MPV consisting of 34 (28+06) types of pipes as per drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 N/A

SUPPLY OF FRONT SIGHT BLOCK AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL

AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL

K 1207

ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

CETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

EN 8 / ASTM 106 GR B

EN 8 / ASTM 106 GR B

STEEL ROD, 220MM LENGTH 560MM AS PER SPECIFICATION AND M.I

AS PER SPECIFICATION ASTM 106 GRADE B

NA

ADAPTOR FORGING AS PER DRAWING AND M.I

STEEL GRADE 709M40

O ADF 155 2 010 REV 8

HOLDER AS PER DRAWING AND M.I

SHEET METAL COMPONENT

NASK 1070

C.F. NO.12.5, DT. 17-01-95, C.F. SKETCH NO. 765, DT. 02-12-88

C.F. NO.12.5, DT. 17-01-95, C.F. SKETCH NO. 765, DT. 02-12-88

THREAD COTTON UNBLEACHED

THREAD COTTON SEWING BLEACHED UNPROOFED (27 TEX x 9)(COPS OF 1000 ME\TRS JSS:8310-02 2016 REVISION NO.3 DC 5497-ME DT.24-09-2016.

TAPE COTTON WHITE 1/4"

TAPE COTTON WHITE UN-PROOFED FOR AMMUNITION PURPOSES 6 MM + OR -1.5MM WIDE SPECN:IND/ME/888:2015 DC-5405(ME) DT.01.02.2016

nil

IS 264-2005 III REV

IS 264-2005 III REV

PLUG AS PER DRAWING AND M.I

MOULDED PLASTIC COMPONENT

NASK 1063

SODA ASH COMMERCIAL CF SPEC.39

SODA ASH (COMMERCIAL GRADE) AS PER C.F.SPECN.NO.39.0 DT.29-06-2006 (ENCLOSED)

nil

PAPER WRAPPING WAXED KRAFT AMM

PAPER WRAPPING WAXED KRAFT AMMUNITION-1118mm X 182.88 m SPECN:JSS 8135-05:2013 REVISION NO.4 DC 5186(ME) DT:19-03-2014.

nil

OLEUM GRADE I. 20%

OLEUM TECH.GR.I WITH 20% FREE SO3 (MIN) TO SPECN:IS:1089 OF 1986 (2nd REVISION) REAFFIRMED 2015.TO CONFIRM WITH ADDL.REQT FOR EXPLOSIVES INDUSTRY-Cl.3.3

nil

IA -948

IA -948

MINERAL JELLY

MINERAL JELLY SPECN:JSS.8030-09:2016 REV NO.3) DC NO.5487-ME DT:24.09.2016

nil

JSS: 9620-01:2001 (Rev -1)

JSS: 9620-01:2001 (Rev -1)

JSS 6810-109-1995 (REV.1)

JSS 6810-109-1995 (REV.1)

IS 1593-1982

IS 1593-1982

GASKET AS PER DRAWING AND M.I

RUBBER COMPONENT

NASK 1071/5

DI-N-BUTYL PHTHALATE

PLASTICIZER ESTERS TYPE-I-DI-N-BUTYL PHTHALATE TO SPECN:IS14421-1997(SUPERSEDES IS:3371-1980). REAFFIRMED 2013

nil

IS 5088-1982 (REV.1)

IS 5088-1982 (REV.1)

CAMBRIC COT.RED 1117.6/1143 MM

CAMBRIC COTTON DYED SIGNAL RED 1117.6 MM (44") ISC COLOUR CODE 537 OF IS:5-2007 (SIXTH REVISION FOR SIGNAL RED SPECN : IS:5088 OF 1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2007 DC3999-ME DT.08-01-2010 (VARIETY NO.2)

nil

IMPACT PROTECTION RIGHT TO DRG. NO 304052778 DC NO-19311-W DATED 02.03.2013 WITH ACCESSORIES I E INCLUDING CLEANING SACHET, STRAP & DOUBLE SIDED ADHESIVE DRG, NO- F- 1303-028990-A

AS PER DRAWING

304052778

• AS PER ATTACHMENT

• AS PER ATTACHMENT

CAMBRIC COTTON DYED RED 36"

CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") (SIXTH REVISION) CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") ISC COLOUR CODE 537 OF IS: 5-2007 (SIXTH REVISION) FOR SIGNAL RED. SPECN:IS:5088 OF 1982(FIRST REVISION)WITH AMENDMENT NO.2 REAFFIRMED 2011 DC3999-ME DT.08-01-2010 (VARIETY NO.2)

nil

CAMBRIC COTTON LIGHT ORANGE

CAMBRIC COTTON DYED LIGHT ORANGE 915 MM WIDE (ISC No.557 OF IS:5/2007) (SIXTH REVISION) SPECN IS:5088 OF 1982 (FIRST REV) WITH AMENDMENT NO.2 SPECN IS:5088 OF 1982 (FIRST REV) WITH AMENDMENT NO.2

nil

CAMBRIC COTTON OLIVE GREEN 36"

CAMBRIC COTTON DYED OLIVE GREEN 915 MM WIDE (36") IS COLOUR CODE 220 OF IS:5-2007 (SIXTH REVISION) FOR OLIVE GREEN SPECIFICATION IS:5088 OF1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2007 DC3999-ME DT.08-01-2010 (VARIETY NO.2).

nil

CAMBRIC COTTON DYED BLUE.

CAMBRIC COTTON DYED AZURE BLUE 44" WIDE ISC NO:104 OF IS:5/2007 FOR AZURE BLUE (SIXTH REVISION) TO SPECN: IS: 5088 OF 1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2011 DC 3999-ME DT.08-01-2010 (VARIETY NO;2)

nil

TEXTOLITE SEALING RING AS PER DRAWING AND M.I

RESIN COMPONENT

NASK 1071/2

BAGS CALICO (40 KG CAPACITY)

BAGS CALICO FOR 40 KG M.T PROPELLANTS MADE OUT OF CALICO CLOTH AND AS PER CFA DRG NO.1037 DATED 24.12.2013 SPECN-IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD 2011-FOR CLOTH

nil

BAGS CALICO.

CALICO BAG TO CFA SKETCH NO:932. DT.19.9.2001 WITH AMENDMENT NO.2 FOR BAG SPECN.IS-5088-1982 (FIRST REV)WITH AMENDMENT NO.2 OCT 1996 REAFD. 2007- FOR CLOTH

nil

CALCIUM CARBONATE TYPE II

CALCIUM CARBONATE FOR EXPLOSIVES TYPE II PRECIPITATED MATERIAL RETAINED ON 90 MICRON IS SIEVE - NIL (PERCENT BY MASS) FOR USE IN PROPELLANTS SPECN: IS 7633 - 1982 REAFFIRMED 2016. (FIRST REVISION) AMENDMENT NO. 1 DC 5372-ME DT.28-07-2015

nil

JSS-8035-14-1998(REV.NO.2)DC 3532 -ME DT.13-07-98,VIS.20 TO 30 POISES VARIATION SHOULD BE WITHIN +/- 10 %

JSS-8035-14-1998(REV.NO.2)DC 3532 -ME DT.13-07-98,VIS.20 TO 30 POISES VARIATION SHOULD BE WITHIN +/- 10 %

IS-170-2004 FORTH REV

IS-170-2004 FORTH REV

BUS BAR AS PER DRAWING AND MONITORING INSTRUCTION

IS 6603: 1972 GR 07 Cr 18 Ni 9 / STEEL TO IS 513 GR 0 EDD

NASK 1071/8

MAGAZINE BOX AK 630 ASSY. 01

AS PER REQUIRED DRG.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL ROD DIA 55 MM X L1250 TO SPECN. OST 3-98-80 GRADE OF STEEL 30KHRA

AS PER SPECIFICATION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

AS PER DRAWINGS

AS PER DRAWINGS

REFLECTOR TO DRG. NO. AK-630 111-301A IN FINISHED CONDITION

AS PER DRAWING

AK-630 111-301A

AIR MANOMETER MVU-100 (REQD. FOR DRG. NO AK-630M SB02.

AS PER DRG. AND SPECIFICATION

FABRICATION OF GAS BLOCK TO DRG. NO. AO-18.01.020 SB MAKE; AS PER SPECIFICATION & DRAWING

AS PER DRAWING

AS PER DRG. AND SPECN

AS PER DRG. AND SPECN

BUSH TO DRG NO 9-A-621.05.016

AS PER DRAWING

9-A-621.05.016

• as per attachment

• as per attachment

HARD CHROMIUM PLATING ON BARREL FOR AK-630 GUN TO DRG. NO AO-18.01.018

AS PER DRAWING

AO-18.01.018

MESH TO DRG. NO. AK-630 SB 117-7 IN F/C

AS PER DRAWING

AK- 630 SB 117-7

BUFFER SPRING TO DRG. NO:AO-18.00.007

BUFFER SPRING TO DRG. NO:AO-18.00.007

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL BAR 60MM DIA TO SPECIFICATION TU-14-1-1637-76 TO GRADE : BAR OF ALLOY KHISK60V14N11 (EP131)

AS PER SPECIFICATION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

GAS BLOCK TO DRG. NO. AO-18.01.020 IN F/C

AS PER DRAWING

CONTACTOR ASSY. TO DRG.NO.9-A-621.08.000 SB IN F/C

CONTACTOR ASSY. TO DRG.NO.9-A-621.08.000 SB IN F/C

Fabrication of Shutter ring to Drg.no.A.O.18.01.028 (HEAT TREATMENT OPN. TO FINISH DRG. NO. AO-18.01.028 AND PROCESS SCHEDULE SL. FROM 030 TO END ) OF AO-18 STORE

AS PER DRAWING

Drg.no.A.O.18.01.028

VALVE TO DRG.NO.A.O.18.03.010 IN FINISHED CONDITION

AS PER DRAWING

.A.O.18.03.010

• as per attachment

• as per attachment

Link for AO-18/AK-630 Drg. no.3-AO-18.001. AS PER TECH. SPECN: NO. 3-AO-18.001-TY/NASK-835 (PROV.)

AS PER DRAWING

NASK-835

HOSE VG (111)-10-31, 5-47-T GOST 18698-79 (REQ. FOR DRG. NO. AK-630 SB 108) IN FINISHED CONDITION (1 NO.= 7.5 MTR)

AS PER SPECIFICATION

FIXTURE FOR CONNECTING STRIP/BAND TO AK 630 YU SB8

FIXTURE FOR CONNECTING STRIP/BAND TO AK 630 YU SB8

WINCH TO DRG.NO.AK-630 Yu SB-3

WINCH TO DRG.NO.AK-630 Yu SB-3

• as per attachment

• as per attachment

HOIST TO DRG. NO. AK-630-YU SB1 SB

HOIST TO DRG. NO. AK-630-YU SB1 SB

BELT FILLING MACHINE AO.18N.000

BELT FILLING MACHINE AO.18N.000

FIXTURE AO.18P.000

FIXTURE AO.18P.000

• as per attachment

• as per attachment

PLATE TO DRG. NO. AK-630 SB 171/50-71 IN FINISHED CONDITION

PLATE TO DRG. NO. AK-630 SB 171/50-71 IN FINISHED CONDITION

ELECTRIC AIR VALVE 3K-48

ELECTRIC AIR VALVE 3K-48 (REQ. FOR DRG. NO. SB114)

• as per attachment

• as per attachment

MACHINING OF 1 SET OF RACE RING CONSIST OF LOWER RING TO DRG. AK-630 119-1, UPPER RING TO DRG. AK-630 119-2, INTERNAL RING TO DRG. AK-630 119-25 FROM A SET OF FORGINGS CONSISTS OF FORGING OF LOWER RING TO DRG. AK-630 119-1, FORGING OF UPPER RING TO DRG. AK-630 119-2, FORGING OF INTERNAL RING TO DRG. AK-630 119-25.

AS PER DRG. & SPECIFICATION

SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF : (A) FORGING OF LOWER RING TO DRG. NO. AK-630 119-1 (B) FORGING OF UPPER RING TO DRG. NO. AK-630 119-2, (C) FORGING OF INTERNAL RING TO DRG. NO. AK-630 119-25. MAT. SPECIFICATION : GRADE X 2CR13 TO IS 6911-92 (AS PER CQA(MET)).

AS PER DRG. & SPECIFICATION