PRITHVI AIR VERSION (P-II VERSION) FULLY CONFORMING TO DEFINITION DOSSIER NO. RDE/92317/GS(PV)/DD/IFTS DATED OCTOBER 2001 & ACCEPTANCE TEST PLAN NO. RDE/92317/GS(PV)/ATP/IFTS DATED OCTOBER 2001 (MODIFIED FROM TIME TO TIME)
Specification
RDE/92317/GS(PV)/DD/IFTS DATED OCTOBER 2001 &ACCEPTANCE TEST PLAN NO. RDE/92317/GS(PV)/ATP/IFTS DATED OCTOBER 2001 (MODIFIED FROM TIME TO TIME)
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
10
04MT
Metric tonne(1000kg)
30724
ORDFYS/HEF/DAVP/2017-18/PV/EOI-2 DATED 19.01.2018
High Explosive Factory
The General Manager,
Kirkee
Kirkee
Khadki, Maharashtra
411003
SPEC. HEF/IO/68B DT 25.04.08 (A) CLEAR LIQUID (B) SP.GR.AT 20DEG CENT.MAX.0.73 (C)TEA CONTENT 98.5% MIN. (D)WATER INSOL.MIX OF TEA & WATER IN 1.1 RATIO BY VOL.&COOLED TO 18 DEG.CENT SHOULD BE COMPLETELY MISCIBLE (E) DIST.RANGE 85-91 DEG.CENT MIN 95% (F)WATER CONTENT LESS THAN 0.1% (BY KARL FISHER METHOD)
Specification
HEF/IO/68B DT. 25.04.08
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
10
1700MT
Metric tonne(1000kg)
30725
ORDFYS/HEF/DAVP/2017-18/PV/EOI-2 DATED 19.01.2018
High Explosive Factory
The General Manager,
Kirkee
Kirkee
Khadki, Maharashtra
411003
S/5432/PW/TC-19(a),Min Width 142 cms required to be water repellant & should conform to standard / values laid down in R/O the bundesmann test as mentioned in Clause 6.1(q) of above specification. Testing of % composition of Wool & polyester should be done as per IS: 2006-1988 2nd Revision Amendment No.1 & the method of Calculation to be based on dry mass basis only as per Clause 9.4.1 of specification.
Specification
S/5432/PW/TC-19(a),Min Width 142 cms required to be water repellant & should conform to standard / values laid down in R/O the bundesmann test as mentioned in Clause 6.1(q) of above specification. Testing of % composition of Wool & polyester should be done as per IS: 2006-1988 2nd Revision Amendment No.1 & the method of Calculation to be based on dry mass basis only as per Clause 9.4.1 of specification.
IND/TC/0157 FIRM TRADE MARK IN ABBREVIATED FORM IN SMALLEST POSSIBLE LETTER TO BE PRINTED ON THE UNCOATED SIDE OF THE FABRIC ALONGSELVEDGE AT AN INTERVAL OF ONE METER. THE HEIGHT OF LETTERSHOULD NOT EXCEED 8MM. DARK/BRIGHT COLOUR TO BE AVOIDED.AS PER RELEVANT CLAUSE OF SPECIFICATION
Specification
IND/TC/0157 FIRM TRADE MARK IN ABBREVIATED FORM IN SMALLEST POSSIBLE LETTER TO BE PRINTED ON THE UNCOATED SIDE OF THE FABRIC ALONGSELVEDGE AT AN INTERVAL OF ONE METER. THE HEIGHT OF LETTERSHOULD NOT EXCEED 8MM. DARK/BRIGHT COLOUR TO BE AVOIDED.AS PER RELEVANT CLAUSE OF SPECIFICATION
IS:4726-1984 (except air porosity test) and Firms name/trademark should be woven/stamped/embossed on the selvedge. in case of stamp, it should be neatly stamped on back side of fabric at an interval of 1(one) meter, without adding to any fabric defect like migration of stamping mark to the outside of the next layer of fabric when folded.
Specification
IS:4726-1984 (except air porosity test) and Firms name/trademark should be woven/stamped/embossed on the selvedge. in case of stamp, it should be neatly stamped on back side of fabric at an interval of 1(one) meter, without adding to any fabric defect like migration of stamping mark to the outside of the next layer of fabric when folded.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
21
AS PER REQUIREMENT
Metre
30730
OFDFYS/EFA/DAVP/01/2018/AVR/2018/01-1
Engine Factory Avadi
Chennai
Chennai
Chennai
Chennai, Tamil Nadu
600054
Scrabbed of BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS
Specification
Scrabbed of BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS
GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK-989,3145/63 0R CQA(SA)SK-984,3145/64 OR CQA(SA)SK-981
Specification
GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK-989,3145/63 0R CQA(SA)SK-984,3145/64 OR CQA(SA)SK-981
SPECN: AS PER APPENDIX 'C' OF PROV.
SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG
(Imp)RELEVANT CLAUSE OF SPECIFICATION
NO. IND/TC/1208 AS PER SPECIFICATION NO.
IND/TC/1208
Specification
SPECN: AS PER APPENDIX 'C' OF PROV.
SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG
(Imp)RELEVANT CLAUSE OF SPECIFICATION
NO. IND/TC/1208 AS PER SPECIFICATION NO.
IND/TC/1208
PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTERFLEECE OG/2009 /TC-19. AS PER CQA(T&C)/PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIEDIN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO. CQA(T&C)/QAI/99 TC-11
Specification
PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTERFLEECE OG/2009 /TC-19. AS PER CQA(T&C)/PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIEDIN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO. CQA(T&C)/QAI/99 TC-11
SPECN NO. PROV/S/2599/TC-
11/2009/03,EXCEPT THAT CLAUSE No.8.5
WHICH SHALL BE"AS PER DRAWING PLATE
No.OCFS/CAPFS/ARMYLOGO"AND CLAUSE
No.16.1 WHICH SHALL BE AS PER SCHEDULE
No.CQA(T&C)/PMS/35(d), EXCEPT THAT THE
FABRIC SHALL BE SUPPLIED INROL FORM ONLY.
Specification
SPECN NO. PROV/S/2599/TC-
11/2009/03,EXCEPT THAT CLAUSE No.8.5
WHICH SHALL BE"AS PER DRAWING PLATE
No.OCFS/CAPFS/ARMYLOGO"AND CLAUSE
No.16.1 WHICH SHALL BE AS PER SCHEDULE
No.CQA(T&C)/PMS/35(d), EXCEPT THAT THE
FABRIC SHALL BE SUPPLIED INROL FORM ONLY.
PROV.SPECIFICATION No. PROV/S/2599/TC-11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE SUITABLE YARN COUNT MAY BE USED IN WARP &WEFT IN 3/1 TWILLWEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH L& FINISH &CLAUSENo.16.1 WHICH SHALL BE AS PER SCHEDULE NO.CQA(T&C)/PMS/35(d),except that the fabric shall be supplied in Roll form only
Specification
PROV.SPECIFICATION No. PROV/S/2599/TC-11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE SUITABLE YARN COUNT MAY BE USED IN WARP &WEFT IN 3/1 TWILLWEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH L& FINISH &CLAUSENo.16.1 WHICH SHALL BE AS PER SCHEDULE NO.CQA(T&C)/PMS/35(d),except that the fabric shall be supplied in Roll form only
COOLING TANK TO DRG NO SB 117/50 WITHOUT PUMP VK-524 A-T2, ELECTRIC MOTOR DM 132 SV- 40 M5 380 V, 55 KW AND CONNECTOR COUPLING H 48547 H 48 54714000-17 WITH PUMP UNIT AK-630 Assy. 117/50 SB
IS : 537- 2011 (IIND REV) WITH ADDITIONAL CLAUSES (1)PURITY 99.8% MIN. (2) PARAFFIN 0.5% MAX. (3) BENZENE 0.05% MAX ADDITIONAL TESTS (PURITY PARAFFIN AND BENZENE WILL BE DETERMINED BY GAS CHROMATOGRAPHY REAFF ; 2008
Specification
IS : 537- 2011 (IIND REV) WITH ADDITIONAL CLAUSES (1)PURITY 99.8% MIN. (2) PARAFFIN 0.5% MAX. (3) BENZENE 0.05% MAX ADDITIONAL TESTS (PURITY PARAFFIN AND BENZENE WILL BE DETERMINED BY GAS CHROMATOGRAPHY REAFF ; 2008
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
10
650 MT
Metric tonne(1000kg)
30736
ORDFYS/HEF/DAVP/2017-18/PV/EOI-2 DATE 19.01.2018
High Explosive Factory
The General Manager,
Kirkee
Kirkee
Khadki, Maharashtra
411003
IS : 264 - 2005 (REAFF 2010) III RD REV. TOTAL ACIDITY (AS HNO3) PERCENT BY MASS, MIN (EXPLOSIVE GRADE) : 98.0% RE-SIDUE ON IGNITION PERCENT MIN. 0.05, CHLORIDES (AS CL), PER-CENT MAX 0.001, SULPHATE (AS H2SO4) PERCENT MAX 0.005 NITROUS ACID AS (HNO2) PERCENT BY MASS MAX 0.2
Specification
IS : 264 - 2005 (REAFF 2010) III RD REV
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
10
2400 MT
Metric tonne(1000kg)
30738
ORDFYS/HEF/DAVP/2017-18/PV/EOI-2 DATE 19.01.2018
High Explosive Factory
The General Manager,
Kirkee
Kirkee
Khadki, Maharashtra
411003
IS 1089-1986, 9REAFF 2003) EXPLOSIVES GRADE, (IIND REV) (A) CONTENTS OF FREE SO3:20% TO 22% (B) IRON:0.01% MAXIMUM (C) LEAD:0.01% MAXIMUM (D) RESIDUE : 0.06% MAXIMUM (E) SPECIFIC GRAVITY MINIMUM 1.920 MAXIMUM 1.925 AT 15 DEG C
Specification
IS 1089-1986, 9REAFF 2003)
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
10
5300 MT
Metric tonne(1000kg)
30742
ORDFYS/HEF/DAVP/2017-18/PV/EOI-2 DATE 19.01.2018
High Explosive Factory
The General Manager,
Kirkee
Kirkee
Khadki, Maharashtra
411003
