MIL Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: [email protected] with a copy to the OFB mail id : [email protected]

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

29281

EOI/F/PV/2018

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity
S.M. SHEET 1.6X1000X2500 MM Description S.M. SHEET 1.6X1000X2500 MM Specification IS:513-94,TYPE "D", BEST SURFACE ANNEALED,KILLED/SEMIKILLED Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Kilogram
BUTYL ACETATE Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Litre
LATEX FOAM RUBBER SOLID TYPE 19 MM THICK 91 CM X 122 CM Description LATEX FOAM RUBBER SOLID TYPE 19 MM THICK 91 CM X 122 CM Specification IS:1741 GR.'D' Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Sheet
FULL SOCKS LEATHER WITH EVA CUSION IN VARIOUS SIZES Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Set
FABRICATION OF LINER INNER FOR TEFS 2M Description FABRICATION OF LINER INNER FOR TEFS 2M Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Number
LT WT. WEB COTTON THICK OG 25 MM Description LT WT. WEB COTTON THICK OG 25 MM Specification AS PER SPEC Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Metre
PANNEL PGS NO. 2 Description IND/GS/1269(C) (4712/PK DT.08.06.86) Specification IND/GS/1269(C) (4712/PK DT.08.06.86) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Number
BASYNTAN FB-6(BASF)/VERNATAN R-7(STAHL)/BASSYN/TOTAL SOLID : 94% MIN Description BASYNTAN FB-6(BASF)/VERNATAN R-7(STAHL)/BASSYN/TOTAL SOLID : 94% MIN Specification AS PER SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Kilogram
LATEX FOAM RUBBER SHEET SOLID TYPE 13MM THICK X .60M X 1.20M Description LATEX FOAM RUBBER SHEET SOLID TYPE 13MM THICK X .60M X 1.20M Specification IS:1741 1960 GRADE 'D' WITH AMDT. NO. 1 & 2 Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Sheet
WEB COTTON BLACK THICK 25 MM Description WEB COTTON BLACK THICK 25 MM Specification IS:6488-1987( REAFFIRMED 1997( 2ND REV ) Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Metre
S.M. SHEET 1.25MM X 1400 X 3600 MM (18 BG) (CR SHHET) Description S.M. SHEET 1.25MM X 1400 X 3600 MM (18 BG) (CR SHHET) Specification IS : 513 - 94,TYPE 'D' BEST SURFACE ANNEALED,KILLED/SEMI KIL Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Kilogram
FORMIC ACID 80% Description FORMIC ACID 80% Specification AS PER REQUIREMENT AND SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	AS PER REQUIREMENT Kilogram

29282

2204/OFDR/OTE/ADV.VEN.REG/2018/MISCELLANEOUS TYPE ITEMS/PART-I

Ordnance Factory Dehu Road

The General Manager,
Dehu Road
Dehu Road
SELECT count(1) as no_application,FM.name as factory_name FROM `vendor_master` `VM` JOIN `adve
412101

Name	Code	Quantity
POLYTHENE BAG TO HOLD DRAG RING & Description POLYTHENE BAG TO HOLD DRAG RING AND CIRCLIP TO DRG.NO.ARDE 2135 DET NO.5 MATL : LDPE TYPE 1 LAY FLAT TUBING TO SPECN. JSS-9330-03:2014 (REVISION NO 3), DS CAT NO 9330-000115 DC NO. 5429-ME DTD. 31-03-2016 - Specification POLYTHENE BAG TO HOLD DRAG RING AND CIRCLIP TO DRG.NO.ARDE 2135 DET NO.5 MATL : LDPE TYPE 1 LAY FLAT TUBING TO SPECN. JSS-9330-03:2014 (REVISION NO 3), DS CAT NO 9330-000115 DC NO. 5429-ME DTD. 31-03-2016 - Drawing no. POLYTHENE BAG TO HOLD DRAG RING AND CIRCLIP TO DRG.NO.ARDE 2135 DET NO.5 MATL : LDPE TYPE 1 LAY FLAT TUBING TO SPECN. JSS-9330-03:2014 (REVISION NO 3), DS CAT NO 9330-000115 DC NO. 5429-ME DTD. 31-03-2016 - Manufacturing Technology Testing / Inspection Facility	62	5625 Number
Spool Complete assembly ( item no. 18 ) for Flare Trip Wire Description CIA-3807(b) [Drg No.DD(L) 13461-A/1] Specification CIA-3807(b) [Drg No.DD(L) 13461-A/1] Drawing no. Manufacturing Technology Testing / Inspection Facility	64	1003 Number
POLY PROPYLENE DISC FOR 51MM SMOKE Description DRG. NO.CQA(A)/AMN/2868 PT.NO.ITV 252 Specification DRG. NO.CQA(A)/AMN/2868 PT.NO.ITV 252 Drawing no. Manufacturing Technology Testing / Inspection Facility	62	5100 Number
PROFEL PACKING FITMENT FOR SHELL 84MM ILLG. Description DRG. NO. OFDR/PACKING/84MM/74 Specification DRG. NO. OFDR/PACKING/84MM/74 Drawing no. Manufacturing Technology Testing / Inspection Facility	65	4040 Set
DISC FOR BOMB 51 MM PACKING Description DRG NO OFDR/BOMB 51MM ILLG/SMK/114 Specification DRG NO OFDR/BOMB 51MM ILLG/SMK/114 Drawing no. Manufacturing Technology Testing / Inspection Facility	62	15050 Number
SUPPORT WOODEN Description DRG.NO.ARDE 2148 (ISSUE I) DET-2. SPECN IND/ ME 883 (E) (PROV), COMMERCIAL GRADES Specification DRG.NO.ARDE 2148 (ISSUE I) DET-2. SPECN IND/ ME 883 (E) (PROV), COMMERCIAL GRADES Drawing no. Manufacturing Technology Testing / Inspection Facility	62	7515 Number
CONTAINER WITH DISC FOR BOMB 81 MM ILLG. MK-II Description DRG. NO. CIA/AMMN/811, PT.NO.ITV 6A & PT. NO. ITV 24 SPECN. NO.CQA(A) 2303 (F) Specification DRG. NO. CIA/AMMN/811, PT.NO.ITV 6A & PT. NO. ITV 24 SPECN. NO.CQA(A) 2303 (F) Drawing no. Manufacturing Technology Testing / Inspection Facility	62	829058 Set
DISC CELLULOID 20 MM DIA Description DISC CELLULOID 20 MM DIA.TO DRG.NO.ARDE 2024 DET NO.22 (SPECN. JSS 1375-03-2011 (REV.NO.3) DC NO 5070 -E DT 07/2/12- - Specification DISC CELLULOID 20 MM DIA.TO DRG.NO.ARDE 2024 DET NO.22 (SPECN. JSS 1375-03-2011 (REV.NO.3) DC NO 5070 -E DT 07/2/12- - Drawing no. DISC CELLULOID 20 MM DIA.TO DRG.NO.ARDE 2024 DET NO.22 (SPECN. JSS 1375-03-2011 (REV.NO.3) DC NO 5070 -E DT 07/2/12- - - Manufacturing Technology Testing / Inspection Facility	62	7725 Number

29283

2204/OFDR/OTE/ADV.VEN.REG/2018/RUBBER ITEMS/PART-I

Ordnance Factory Dehu Road

The General Manager,
Dehu Road
Dehu Road
SELECT count(1) as no_application,FM.name as factory_name FROM `vendor_master` `VM` JOIN `adve
412101

Name	Code	Quantity
RUBBER PLUG FOR SIGNAL FLARE Description DRG.NO.NASK 864/8 (PROV) Specification DRG.NO.NASK 864/8 (PROV) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	4200 Number
GASKET FOR 120MM ILLG. Description DRG. NO. ARDE 2011, DET. 18 PT NO. ITV - 148 SPECN.NO.CQA(A) 2321(b) Specification DRG. NO. ARDE 2011, DET. 18 PT NO. ITV - 148 SPECN.NO.CQA(A) 2321(b) Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10170 Number
WASHER FOR 120MM ILLUG. Description WASHER TO DRG.NO. ARDE 2011,DET 16 PT NO.ITV-146 Specification WASHER TO DRG.NO. ARDE 2011,DET 16 PT NO.ITV-146 Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10170 Number
RUBBER RING FOR 84 MM ILLG. Description RUBBER RING TO DRG.NO.F-1301-047940-D DC 34802 A NATURALRUBBER TO SPECN.IND/ME/728 COMPUND Z-14-C. Specification RUBBER RING TO DRG.NO.F-1301-047940-D DC 34802 A NATURALRUBBER TO SPECN.IND/ME/728 COMPUND Z-14-C. Drawing no. Manufacturing Technology Testing / Inspection Facility	62	49612 Number
O RING 69.5 DIA FOR 84 MM ILLG. Description DRG.NO.F-1301-054930 C Specification DRG.NO.F-1301-054930 C Drawing no. Manufacturing Technology Testing / Inspection Facility	62	40840 Number
O RING 61 X 2 MM FOR SHELL 84MM ILLG Description DRG. NO. F-1301-055320C Specification DRG. NO. F-1301-055320C Drawing no. Manufacturing Technology Testing / Inspection Facility	62	40840 Number
RUBBER BAND FOR 84 MM ILLG. Description DRG.NO.OFDR /FQ-64 /R16/A4 TO SPECN. IND/ME/728 Specification DRG.NO.OFDR /FQ-64 /R16/A4 TO SPECN. IND/ME/728 Drawing no. Manufacturing Technology Testing / Inspection Facility	62	42400 Number
RUBBER WASHER FOR 51MM ILLG. Description DRG. NO.ARDE 2064 DET NO 17 PT NO ITV 234 SPECN. CQA(A) 2328 (d) Specification DRG. NO.ARDE 2064 DET NO 17 PT NO ITV 234 SPECN. CQA(A) 2328 (d) Drawing no. Manufacturing Technology Testing / Inspection Facility	62	19533 Number
O RING 1MM FOR 51MM ILLG. Description DRG NO. ARDE 2064 (DET NO.4) PT.NO.ITV 223 SPECN. CQA(A) 2328 (d) Specification DRG NO. ARDE 2064 (DET NO.4) PT.NO.ITV 223 SPECN. CQA(A) 2328 (d) Drawing no. Manufacturing Technology Testing / Inspection Facility	62	38629 Number
RUBBER RING FOR MORTAR BOMB 81MM ILLG 2A Description CQA(A) 2345 (C)[DRG.NO. ARDE 1965, Det No.25, Part No. ITV 134] Specification CQA(A) 2345 (C)[DRG.NO. ARDE 1965, Det No.25, Part No. ITV 134] Drawing no. Manufacturing Technology Testing / Inspection Facility	62	82400 Number
WASHER RUBBER FOR BOMB 3 KG PRACTICE Description WASHER RUBBER TO DRG.NO.ARDE 2024 DET NO.25 AL NO 671 DATED 29/05/91 SPECN;IND/ME/584(f) CLASS D DC NO.3754-ME DT.12/12/2002. - Specification WASHER RUBBER TO DRG.NO.ARDE 2024 DET NO.25 AL NO 671 DATED 29/05/91 SPECN;IND/ME/584(f) CLASS D DC NO.3754-ME DT.12/12/2002. Drawing no. WASHER RUBBER TO DRG.NO.ARDE 2024 DET NO.25 AL NO 671 DATED 29/05/91 SPECN;IND/ME/584(f) CLASS D DC NO.3754-ME DT.12/12/2002. Manufacturing Technology Testing / Inspection Facility	62	7725 Number

29284

2204/OFDR/OTE/ADV.VEN.REG/2018/PLASTIC ITEMS/PART-I

Ordnance Factory Dehu Road

The General Manager,
Dehu Road
Dehu Road
SELECT count(1) as no_application,FM.name as factory_name FROM `vendor_master` `VM` JOIN `adve
412101

Name	Code	Quantity
CABLE HOUSING FOR 120MM ILLG. Description DRG NO. ARDE2011, DET 17 PT NO.ITV - 147 Specification DRG NO. ARDE2011, DET 17 PT NO.ITV - 147 Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10170 Set
HALF CUP FOR 120MM ILLG. Description DRG.NO.CIA.AMN/2158 PART NO.ISV 1740 Specification DRG.NO.CIA.AMN/2158 PART NO.ISV 1740 Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10160 Pair
AMMUNITION CONTAINER PLASTIC 47 B WITH SEALING RING, FOR FUZE 213 MK-5 (M-2) Description DRG.NO.CIA/AMN/2483, PART NO ISV 515A Specification DRG.NO.CIA/AMN/2483, PART NO ISV 515A Drawing no. Manufacturing Technology Testing / Inspection Facility	65	232 Number
TRANSIT PLUG FOR 84 MM ILLG. Description DRG.NO.CIA/AMMN/2220 PT NO.ISX 318 MATERIAL TYPE I TO JSS:9330-O5 : 2012 (REV.NO.1) Specification DRG.NO.CIA/AMMN/2220 PT NO.ISX 318 MATERIAL TYPE I TO JSS:9330-O5 : 2012 (REV.NO.1) Drawing no. Manufacturing Technology Testing / Inspection Facility	62	40400 Number
CUP(HDPE-TYPE-I)FOR 84 MM ILLG. Description SPECN JSS-9330-03-2007 REV.NO.2TO DRG.NO.F-1301-056251-A Specification SPECN JSS-9330-03-2007 REV.NO.2TO DRG.NO.F-1301-056251-A Drawing no. Manufacturing Technology Testing / Inspection Facility	62	41040 Number
PARACHUTE HOUSING, 51 ILLG. Description DRG.ARDE 2064 DET NO. 24 PT NO.ITV 240 SPECN. NO. CQA(A) 2328(d) Specification DRG.ARDE 2064 DET NO. 24 PT NO.ITV 240 SPECN. NO. CQA(A) 2328(d) Drawing no. Manufacturing Technology Testing / Inspection Facility	62	19476 Pair
RING SEALING FOR 81MM ILLG MK-II Description SPECN NO. CQA (A) 2345 (C) DC-36513A DATED 25.1.99 DRG NO ARDE 2222 DET-13 PT NO ITV 261DC NO. 36513A DATED 25-1-99 Specification SPECN NO. CQA (A) 2345 (C) DC-36513A DATED 25.1.99 DRG NO ARDE 2222 DET-13 PT NO ITV 261DC NO. 36513A DATED 25-1-99 Drawing no. Manufacturing Technology Testing / Inspection Facility	62	81600 Number
HALF CUP FOR 81MM ILLG. Description DRG.NO. ARDE 2224 DET NO.5 PT.NO.ISV 1930 Specification DRG.NO. ARDE 2224 DET NO.5 PT.NO.ISV 1930 Drawing no. Manufacturing Technology Testing / Inspection Facility	62	82000 Pair
CARRIER AMMN. 17A FOR M.B. 81MM ILLG. 2A Description CQA(A) 2804 (M) DRG. NO. ARDE 2224 PT. NO. 551A Specification CQA(A) 2804 (M) DRG. NO. ARDE 2224 PT. NO. 551A Drawing no. Manufacturing Technology Testing / Inspection Facility	62	41920 Number
CUP PLASTIC FOR 81MM ILLG MK-II Description DRG NO ARDE 2222 DET 10 PT NO ITV 262 SPECN. NO. CQA (A) 2345 (C) Specification DRG NO ARDE 2222 DET 10 PT NO ITV 262 SPECN. NO. CQA (A) 2345 (C) Drawing no. Manufacturing Technology Testing / Inspection Facility	62	164800 Number
SPRING HOLDER FOR 81MM MK-II Description DRG NO ARDE 2222 DET 7 PT NO ITV 258, SPECN: NO. CQA(A) 2345(C) Specification DRG NO ARDE 2222 DET 7 PT NO ITV 258, SPECN: NO. CQA(A) 2345(C) Drawing no. Manufacturing Technology Testing / Inspection Facility	62	81760 Number
CAP FOR CONTAINER BUOYANT SMOKE Description DRG.NO.OFDR/CT/6/M1/A3, SPECN. NO.DGOF/OFDR/OO8. Specification DRG.NO.OFDR/CT/6/M1/A3, SPECN. NO.DGOF/OFDR/OO8. Drawing no. Manufacturing Technology Testing / Inspection Facility	62	2277 Number

29285

2204/OFDR/OTE/ADV.VEN.REG/2018/METAL ITEMS/PART-II

Ordnance Factory Dehu Road

The General Manager,
Dehu Road
Dehu Road
SELECT count(1) as no_application,FM.name as factory_name FROM `vendor_master` `VM` JOIN `adve
412101

Name	Code	Quantity
SIGNAL FLARE (ASSY) FOR INDIAN NAVY Description DRG.NO.NASK 864/1(PROV)CONSISTING OF1.UPPER BODY TO DRG.NO.NASK 864/1/2(PROV)2.LOWER BODY WITHFINS TO DRG.NO.NASK 864/1/3(PROV)3.PROPELLANT TUBE TO DRG.NONASK 864/7/1(PROV)4.NOSE CAP TO DRG.NO.NASK 864/1/1(PROV)5.STEEL WASHER TO DRG.NO.NASK 864/6 (PROV). Specification DRG.NO.NASK 864/1(PROV)CONSISTING OF1.UPPER BODY TO DRG.NO.NASK 864/1/2(PROV)2.LOWER BODY WITHFINS TO DRG.NO.NASK 864/1/3(PROV)3.PROPELLANT TUBE TO DRG.NONASK 864/7/1(PROV)4.NOSE CAP TO DRG.NO.NASK 864/1/1(PROV)5.STEEL WASHER TO DRG.NO.NASK 864/6 (PROV). Drawing no. Manufacturing Technology Testing / Inspection Facility	99	4200 Number
SQUIB FOR SIGNAL FLARE Description ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL II TO DRG.NO. NASK 865/1/3 (PROV) Specification ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL II TO DRG.NO. NASK 865/1/3 (PROV) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	4200 Number
TORPEDO IGNITION CARTG.(EMPTY) Description (I) CONTAINER TODRG.NO.NAD 19502/2/1 (II) RING TO DRG NO.NAD 19502/3/3(III) CARTG CASE TO DRG NO.NAD 19502/1. Specification (I) CONTAINER TODRG.NO.NAD 19502/2/1 (II) RING TO DRG NO.NAD 19502/3/3(III) CARTG CASE TO DRG NO.NAD 19502/1. Drawing no. Manufacturing Technology Testing / Inspection Facility	64	460 Set
SET OF 9 COMPONENTS FOR FTW Description CQA(A) 3807 (d) DRG. NO. 13461-A/1 Specification CQA(A) 3807 (d) DRG. NO. 13461-A/1 Drawing no. Manufacturing Technology Testing / Inspection Facility	64	1015 Set
Body Cast Iron Empty for FTW Description CIA 3807(d) Drg. No. DD(L) 13461/A/1 Specification CIA 3807(d) Drg. No. DD(L) 13461/A/1 Drawing no. Manufacturing Technology Testing / Inspection Facility	64	1015 Number
WASHER BRASS 1.22MM THICK X 11.68 EXT. DIA X 7.938 FOR FTW Description JSS 9535-O2:1995 (REV NO 1) Specification JSS 9535-O2:1995 (REV NO 1) Drawing no. Manufacturing Technology Testing / Inspection Facility	64	1020 Number
TUBE ITEM.NO.6 FOR FLARE TRIP WIRE Description DRG.NO - DD(L) 13461A/1SHEET NO.1 Specification DRG.NO - DD(L) 13461A/1SHEET NO.1 Drawing no. Manufacturing Technology Testing / Inspection Facility	64	1040 Number
COVER EMPTY ITEM N0.9 FOR FLARE TRIP WIRE MK 1/L. Description DRG.NO.DD(L) 13461-A/1, SHEET NO.1 SPECN NO.CQA(A)3807 (d) Specification DRG.NO.DD(L) 13461-A/1, SHEET NO.1 SPECN NO.CQA(A)3807 (d) Drawing no. Manufacturing Technology Testing / Inspection Facility	64	1020 Number
SPRING WITH LINK (ITEM N0.10,11&14) FOR FLARE TRIP WIRE Description SPRING WITH LINK ITEM NO.11, CLAMP ITEM NO.10, WING NUT ITEM NO.14 TO DRG NO.DD(L) 13461-A/1 SHEET 1 DC NO.37167-A DT 05/04/08 ARM WITH LOCATING BRRACKET TO DRG NO.DD(L)13461-A/1 SHEET 2 DC NO.36632-A SPECN. NO CQA(A)3807 (d) DC 37197-A DT.20/12/2008. Specification SPRING WITH LINK ITEM NO.11, CLAMP ITEM NO.10, WING NUT ITEM NO.14 TO DRG NO.DD(L) 13461-A/1 SHEET 1 DC NO.37167-A DT 05/04/08 ARM WITH LOCATING BRRACKET TO DRG NO.DD(L)13461-A/1 SHEET 2 DC NO.36632-A SPECN. NO CQA(A)3807 (d) DC 37197-A DT.20/12/2008. Drawing no. Manufacturing Technology Testing / Inspection Facility	64	1003 Number
WASHER (BRASS) FOR 120MM ILLG. Description WASHER (BRASS) FOR FUZE T&P DA NO 213 P MK-5 (M2) (FILLED) DRG.NO. S5/7806/F/621 PART NO QX 1247 Specification WASHER (BRASS) FOR FUZE T&P DA NO 213 P MK-5 (M2) (FILLED) DRG.NO. S5/7806/F/621 PART NO QX 1247 Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10542 Number
BOMB BODY (EMPTY)FOR 120MM ILLG. Description SPECN. NO. CQA (A) 2321 (b) DC-36952-A dt.16.03.2004 DRG NO. ARDE 2011 PT. NO. ITV - 12 SA DC (I) 33903 - A Specification SPECN. NO. CQA (A) 2321 (b) DC-36952-A dt.16.03.2004 DRG NO. ARDE 2011 PT. NO. ITV - 12 SA DC (I) 33903 - A Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10150 Number
FERRULE FOR 120MM ILLG. Description DRG. NO. ARDE 2097 PT NO ITV - 217 DC- 34492-A.DT.05/12/88. Specification DRG. NO. ARDE 2097 PT NO ITV - 217 DC- 34492-A.DT.05/12/88. Drawing no. Manufacturing Technology Testing / Inspection Facility	63	20500 Number
FUZE T&P (EMPTY) M4 FOR 120MM ILLG. Description DRG. NO. ARDE 2014 SHEET NO. 2 PT. NO. IQX 68 GE DC-35076-A DT. 19-04-91 SPECN. NO. (L) 9974-F(L) DC 35271-A DT. 24-02-92 Specification DRG. NO. ARDE 2014 SHEET NO. 2 PT. NO. IQX 68 GE DC-35076-A DT. 19-04-91 SPECN. NO. (L) 9974-F(L) DC 35271-A DT. 24-02-92 Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10160 Number
THIMBLES FOR 120MM ILLG. Description DRG. NO. OFDR/FQ/266/A-4/R14 Specification DRG. NO. OFDR/FQ/266/A-4/R14 Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10170 Number
COLLAR FOR 120MM ILLG. Description DRG.NO.ARDE 2011 DET 8 PT NO.ITV - 158 DC (I)36931 (A) DT.14.11.03. MATERIAL SPECN.IS 1570C-20 SPECN.NO.CQA (A) 2321 (b) DC-36952 A dt.16/3/04. Specification DRG.NO.ARDE 2011 DET 8 PT NO.ITV - 158 DC (I)36931 (A) DT.14.11.03. MATERIAL SPECN.IS 1570C-20 SPECN.NO.CQA (A) 2321 (b) DC-36952 A dt.16/3/04. Drawing no. Manufacturing Technology Testing / Inspection Facility	63	11135 Number
EYE BOLT FOR 120MM ILLG. Description DRG.NO.OFDR/FT-464/A4 SPECN.NO.CQA(A) 2321 (b) Specification DRG.NO.OFDR/FT-464/A4 SPECN.NO.CQA(A) 2321 (b) Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10150 Number
DELAY HOLDER FOR 120MM ILLG. Description SPECN. NO. CQA(A) 2321 (b) DRG. NO. ARDE 2011 DET 11 PT NO. ITV 153 Specification SPECN. NO. CQA(A) 2321 (b) DRG. NO. ARDE 2011 DET 11 PT NO. ITV 153 Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10710 Number
RING FOR 120MM ILLG. Description SPECN. IS:1570C 40 DRG. NO. ARDE 2011, DET 24 PART NO. ITV-152 Specification SPECN. IS:1570C 40 DRG. NO. ARDE 2011, DET 24 PART NO. ITV-152 Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10150 Number
EYE LET FOR 120MM ILLG. Description DRG. NO. ARDE - 2011 , DET NO. 21 PT. NO.ITV-150 SPECN NO. CQA (A) 2321 (b) Specification DRG. NO. ARDE - 2011 , DET NO. 21 PT. NO.ITV-150 SPECN NO. CQA (A) 2321 (b) Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10160 Number
MAIN PARA.HOUSING FOR 120MM ILLG. Description DRG.NO. ARDE 2011 DET NO. 19 PARTNO. ITV 149 DC (I) 34732 - A DATED 30-09-1989 METAL STEEL TO SPFCN IS 1079 2009 (REVISION NO. 6)GR EDD OR DD AND SPECN.CQA (A) 2321 (b) DC NO.36952-A DT.16-03-04. Specification DRG.NO. ARDE 2011 DET NO. 19 PARTNO. ITV 149 DC (I) 34732 - A DATED 30-09-1989 METAL STEEL TO SPFCN IS 1079 2009 (REVISION NO. 6)GR EDD OR DD AND SPECN.CQA (A) 2321 (b) DC NO.36952-A DT.16-03-04. Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10150 Number
WASHER CUPPED FOR 120MM ILLG. Description SPECN. NO. CQA(A) 2321(b) DRG. NO. ARDE-2011 DET.15 Specification SPECN. NO. CQA(A) 2321(b) DRG. NO. ARDE-2011 DET.15 Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10170 Number
STAR HOUSING FOR 120MM ILLG Description DRG. NO. ARDE 2011,DET 13 PT.NO.ITV-144 SPECN.NO.CQA(A)2321 (b) Specification DRG. NO. ARDE 2011,DET 13 PT.NO.ITV-144 SPECN.NO.CQA(A)2321 (b) Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10160 Number
AUXILIARY SPRING FOR 120MM ILLG. Description DRG. NO. ARDE-2011 DET. 28 PT NO. ITV 141 SPECN. NO. CQA(A) 2321(b) Specification DRG. NO. ARDE-2011 DET. 28 PT NO. ITV 141 SPECN. NO. CQA(A) 2321(b) Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10160 Number
MAIN SPRING FOR 120MM ILLG. Description DRG.NO.ARDE 2011, DET 27 PT.NO.ITV-139 SPECN NO.CQA (A)2321(b) Specification DRG.NO.ARDE 2011, DET 27 PT.NO.ITV-139 SPECN NO.CQA (A)2321(b) Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10150 Number
PIN SHEARING 120MM ILLG. Description DRG.ARDE 2011,DET 26 PART NO.ITV-138 DC (I) 34861 A MATERIAL MILD STEEL WIRE TO SPECN.IS: 280-1978. REAFFIRMED-2001 AMEND-I.1/4 HARD CONDITION. Specification DRG.ARDE 2011,DET 26 PART NO.ITV-138 DC (I) 34861 A MATERIAL MILD STEEL WIRE TO SPECN.IS: 280-1978. REAFFIRMED-2001 AMEND-I.1/4 HARD CONDITION. Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10170 Set
AUXILLARY PARA.HOUSING 120MM ILLG. Description DRG.NO.ARDE 2011,DET 25 PT NO ITV -137 DC(I) 36036-A (MATERIAL ABS IND/ME/942 (P) Specification DRG.NO.ARDE 2011,DET 25 PT NO ITV -137 DC(I) 36036-A (MATERIAL ABS IND/ME/942 (P) Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10160 Number
TAIL UNIT 2A FOR MORTAR BOMB 120 MM ILLG. Description CQA(A) 2342[DRG.NO. CIA/AMN/1397,PART NO. ITV 11 A Specification CQA(A) 2342[DRG.NO. CIA/AMN/1397,PART NO. ITV 11 A Drawing no. Manufacturing Technology Testing / Inspection Facility	63	10150 Number
CLOSING CUP MODIFIED M.B. 120MM ILLG. Description CQA(A) 2321 (b) DRG. NO. OFDR/CARTG-113/A3 Specification CQA(A) 2321 (b) DRG. NO. OFDR/CARTG-113/A3 Drawing no. Manufacturing Technology Testing / Inspection Facility	99	11135 Number
TUBULAR RIVET FOR 84 MM ILLG. Description DRG.NO.F-1321-433520B Specification DRG.NO.F-1321-433520B Drawing no. Manufacturing Technology Testing / Inspection Facility	62	173400 Number
COVER FOR 84 MM ILLG. Description DRG.NO.F-1301-047932-B DT.10-11-1989 SPECN.F-1301-903340 . Specification DRG.NO.F-1301-047932-B DT.10-11-1989 SPECN.F-1301-903340 . Drawing no. Manufacturing Technology Testing / Inspection Facility	62	41820 Number
SCREW FX POZ M4X8 FOR 84 MM ILLG. Description DRG.NO.F-1301-074540 B DC(I) 34754 A DATED 10-11-89 SPECN BS:1554 1990 GRADE 302 S 31"CD" WITHUTS 1230 N/MM2 MIN.OR SPECN.NO.BS:1554 1990 GRADE 316S33 CDWITH HARDNESS 250-280 HV / UTS 850-880 N/MM2 (AS SPECIFIEDVIDE CQA(MET) LET NO.MQA-4/EE/13 DATED 25-5-91. Specification DRG.NO.F-1301-074540 B DC(I) 34754 A DATED 10-11-89 SPECN BS:1554 1990 GRADE 302 S 31"CD" WITHUTS 1230 N/MM2 MIN.OR SPECN.NO.BS:1554 1990 GRADE 316S33 CDWITH HARDNESS 250-280 HV / UTS 850-880 N/MM2 (AS SPECIFIEDVIDE CQA(MET) LET NO.MQA-4/EE/13 DATED 25-5-91. Drawing no. Manufacturing Technology Testing / Inspection Facility	62	248800 Number
BOTTOM PLATE WITH SWIVEL FOR 84 MM Description DRG.NO.F-1301-054860 F SPECN.F 1301-903400 CLAUSE -3 & 6. Specification DRG.NO.F-1301-054860 F SPECN.F 1301-903400 CLAUSE -3 & 6. Drawing no. Manufacturing Technology Testing / Inspection Facility	62	41208 Number
CASE ASSY. FOR SHELL 84 mm Illg Description F-1301-902340(C) Specification F-1301-902340(C) Drawing no. Manufacturing Technology Testing / Inspection Facility	62	41208 Number

29286

20170667/PV/1444

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
RUBBER COMPOUND FOR SOLE & HEEL Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	55954 Kilogram
RUBBER ADHESIVE Description AS PER REQUIREMENT & SPECIFICATION Specification AS PER REQUIREMENT & SPECIFICATION Drawing no. Manufacturing Technology Testing / Inspection Facility	21	1610 Kilogram

29287

107METT18002278

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity	Approx Value	Select
Packing Box Drg No CO 427 B Description Packing Box Drg. No. CO-427B Specification Packing Box Drg. No. CO-427 Drawing no. CO-427-B.pdf Manufacturing Technology AS PER ATTACHMENT 1074_210831112543_001.pdf Testing / Inspection Facility AS PER ATTACHMENT	14	33 Number

29288

O139-17

Ordnance Factory Dehradun

The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
OPTICAL GLASS LAKN 7-652585 MOULD AS PER DRG. NO.ODD/C/1003/1 Description OPTICAL GLASS LAKN 7-652585 MOULD AS PER DRG. NO.ODD/C/1003/1 Specification OPTICAL GLASS LAKN 7-652585 MOULD AS PER DRG. NO.ODD/C/1003/1 Drawing no. OPTICAL GLASS LAKN 7-652585 MOULD AS PER DRG. NO.ODD/C/1003/1 drawing.pdf Manufacturing Technology Testing / Inspection Facility	26	775 Number

Proceed